• No results found

IoT based Gateway for Electricity Energy Meter by using ZigBee

N/A
N/A
Protected

Academic year: 2020

Share "IoT based Gateway for Electricity Energy Meter by using ZigBee"

Copied!
9
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1.  Conceptual Block Diagram of Proposed System
Figure – 2 ZigBee Module
Figure – 5 Pin Configuration of PIC 18F4520
Figure – 7 GSM Module

References

Related documents

And the bandwidth ,Gain is improved by replacing the shape of microstrip patch antenna by inserting the more slots inside the rectangular patch in the shape of

reference is compared with each carrier signalto determine the output voltage for the inverter. Three dispositions of the carrier signal are considered to generate the PWM

The paper is arranged as follows. In section 2, we review the synchronous CDMA model and ~everal multiuser detector structures. In section 3, we formulate the signal model of the

If avian sex chromosome differentiation, as manifested by the cessation of recombination at the ATP5A1 locus, has occurred on several independent occasions in different lineages,

hTNF- ␣ vaccine induces anti-TNF- ␣ Abs. As shown in Fig. We first tested the protective effect of TNF- ␣ vaccine in an acute colitis model. One week after the last immunization,

(3) Developmental functions of GA-I patients were different from those of healthy controls for motor speed and visual search but not for visual working memory (a test with

Thus, the two receiving coils used in this study achieve a uniform magnetic field and then achieves constant output power and high transfer efficiency between the main receiver