• No results found

Detecting, Mapping, and Quantifying Macrophytes Using Novel Boat-based Remote Sensing Technologies.

N/A
N/A
Protected

Academic year: 2020

Share "Detecting, Mapping, and Quantifying Macrophytes Using Novel Boat-based Remote Sensing Technologies."

Copied!
217
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1. Locations of two NC piedmont reservoirs sampled for hydrilla biomass and hydroacoustic scans; Shearon Harris (bottom
Figure 2. Example of a singular plot used for seasonal biomass sampling and hydroacoustic scans, containing n=60 georeferenced
Figure 3. Sampling sites, shown in red, at each corresponding experimental lake location
Figure 4. Map of raster cells (7.5 m-2) representing depth contours at each given geographic location at Shearon Harris
+7

References

Related documents

Centre for Workforce Intelligence (2011) Allied Health Professionals, Workforce risks and opportunities [online] Available at:

∗ Marion Fourcade, Department of Sociology, University of California, Berkeley, CA 94720- 1980, USA; fourcade@berkeley.edu. Kieran Healy, Department of Sociology, Duke

Kation Europe: Within the framework of subprograms 1-2 of the Institute of Medical Chemistry of USZ and with the aid of DNT resources, Kation Europe - augmenting its capacities –

From the company parties which prohibit “shop talk,” to Anchor Funding’s insistence that it’s loan officers take time off to spend with their families, or to go on vacation,

screened yield, kappa number, tensile index, and tear index, m is the number of hidden nodes in the hidden layer of WNNs, ψ is the wavelet activation function, x represents the

Robotics  &     Automation   Linear Motion Type: Is a method of path interpolation that commands the movement of the robot by moving each joint in a coordinated motion

ADP-glucose pyrophosphorylase (AGPase) activity in the developing grains of two con- trasting wheat cultivars WH730 (thermo-tolerant) and UP2565 (thermo-sensitive) was deter- mined

Figure 5 evidence the indentations location during the me- asurement for the microhardness test in a representative specimen. In the graph showed in Figure 6 for the weld