• No results found

Design, Simulation and Implementation of Microstrip Meander Line Antenna for an Integrated Transceiver System

N/A
N/A
Protected

Academic year: 2020

Share "Design, Simulation and Implementation of Microstrip Meander Line Antenna for an Integrated Transceiver System"

Copied!
9
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 3.3: Electric Current Magnitude Plot for the MLA. [11]
Table 3.1 Different values of meander width (Lc)
Figure 4.1: The first MLA orientation and simulated matching network required for 50-Ohm match
Fig. 4.4 (a): The first MLA 3D-RP expressed as Gain in dB          (b): The first MLA 2D- RP expressed as Gain in Db
+3

References

Related documents

The whole system, with external I/O IGBT fiber optic gate signals, executes in real- time at 80 µ s time step under the RT-Lab real-time distributed simulation software on

14 Rittal White Paper – Fire extinguisher systems in the data centre Illustration: 19“ rack extinguisher system, rear side3. RJ12 connection to Rittal CMC I/O Unit (malfunction),

Remote sensing, Normalized Difference Vegetation index (NDVI), Islamabad, Satellite images, Development

The algorithm trains a classifier for combinations of parameter values and applies user-defined objective functions, such as the classification error, the sensitivity, or

Above mentioned shows that within 2011-2020 there will be a growth of consumption and generation of electric power and this will lead to high voltage cable

Rapid changes in both the private and public sectors of health care and related industries mean more opportunities for qualified professionals to manage complex

TSV with W Source: Fraunhofer IZM-Munich W-filled TSV Al Top-Chip (17 µm) 2 µm W-filled TSV Al Top-Chip (17 µm) 2 µm Au stud bumps with adhesive (alternative : SLID)

Furthermore, while symbolic execution systems often avoid reasoning precisely about symbolic memory accesses (e.g., access- ing a symbolic offset in an array), C OMMUTER ’s test