• No results found

Error and Efficiency Analysis of Massive 5G Technology with Different QAM Modulation

N/A
N/A
Protected

Academic year: 2020

Share "Error and Efficiency Analysis of Massive 5G Technology with Different QAM Modulation"

Copied!
6
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 2: Massive MIMO System Models with Channel Estimation Technique
Figure 3: BER vs SNR for Massive 8×8 System with QR-RLS based Channel Estimation Technique
Figure 5: BER vs SNR for Massive 32×32 System with QR-RLS based Channel Estimation Technique
Figure 6: Spectrum Efficiency vs SNR for Massive 8×8 System with QR-RLS based Channel Estimation Technique

References

Related documents

For different Rician & Rayleigh fading channel , combination of modulation technique and channel model give better performance that are given below-. 16-QAM

These results are almost same for different modulation techniques with bit rate of 10Gbps at 60km transmission distance however large difference in the power of

In this section the bit error rate analysis of MIMO system done AWGN and Rayleigh fading channel and Alamouti SBTC code with ML, MRC receiver in this section BPSK modulation

For a system using one antenna at the transmitter and one antenna at the receiver and in non fading AWGN channel, the evaluation of the BER for most of the known modulation

As per the analysis of different modulation techniques, we can say BPSK gives better performance with respect to QPSK over AWGN channel. Hence, for a

Keywords: Digital Communication System, Fading channels, Antenna Diversity Techniques, M-array modulation.. scheme,

Simulation Results are plotted for bit error rate performance of OFDM System simulation is performed Rayleigh channel using BPSK, QPSK, 4QAM, 16QAM Modulation

We investigated the performance of bit error rates of SWT based OFDM in LTE for different modulation techniques such as QPSK, 64 QAM, 128 QAM under SUI 3 Channel model using SWT