• No results found

Design and Development of a Multi-sensor Monitoring Device for Arm Rehabilitation

N/A
N/A
Protected

Academic year: 2020

Share "Design and Development of a Multi-sensor Monitoring Device for Arm Rehabilitation"

Copied!
8
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1 Resistance against force [17]
Fig. 4 Arduino circuitry board [13]
Fig. 5 Resistance value against flex sensor bending angle.
Fig. 8 EMG test result on M. extensor carpi radialis muscles based on hand grasping activity (10 repetitions)
+3

References

Related documents

Replace every Year Life Cycle Cost LCC 1 LCC 2 LCC 3 LCC 4 LCC X Replace Every 2 Years Replace Every 3 Years Replace Every 4 Years

Sequencing methods   —   in particular, long-read and linked-read sequencing, whole genome skimming and exome sequencing   —   prom- ise to increase the throughput and reduce

The major Advantages are System developed is reproducible type and resident time is very short, Person to person variability is less, Bioavailability is improved by

Figure (8) shows the path where the maximum velocity occurs at levels equal to 55.5% of the flow depth from the bed and 5% of the flow depth from water surface in PFV

Minima, maxima and mean values as well as median and standard deviation of the groundwater level data (DL-W 1-6) for each logger application time from 20 June 2015 to 18 April 2017

Immunoblotting analysis revealed that both HPB-ALL and Jurkat cells exhib- ited detectable levels of basal JNK phosphorylation even af- ter serum starvation, and fetal bovine

13 In French cities, apprenticeship began at age twelve in the sixteenth century, and rose over the seventeenth century, with youths becoming journeymen in their mid to late teens;

The land at Armathwaite is located immediately to the North of the village, approximately 12 miles South of Carlisle and 13 miles North of Penrith.. At Junction 41 of the M6