• No results found

The Model Development of Gas Diffusion Layer for PEM Fuel Cell

N/A
N/A
Protected

Academic year: 2020

Share "The Model Development of Gas Diffusion Layer for PEM Fuel Cell"

Copied!
7
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table I  The range of values for the porosity and thickness of GDL
Figure 3 shows the results of comparison curves for the developed model and model of Sahraoui et al
Table 1. Figure 4 shows the curve of power against the porosity of GDL at a voltage of 0.7 V
Fig.  5. Contour of oxygen mass fraction for porosity, ɛ = (a) 0.05 (b) 0.1 (c) 0.2 (d) 0.4 (e) 0.6 (f) 0.8
+2

References

Related documents

Passed time until complete analysis result was obtained with regard to 4 separate isolation and identification methods which are discussed under this study is as

The current report, which is part of the Iranian Cataract Surgery Survey (ICSS), 31 reviewed some effective factors on hospitalization time in cataract surgery with a focus

If the alien sees other aliens nearby it will attack the player, but if it is alone, it will flee.. The behind this kind of behavior is to make the aliens attack in pairs

The main objective of our project is to continuously measures the weight of the cylinder by load cell and when the weight of the cylinder goes below the set value

The tracking grid indicates the provisional approval date, NLNAC site visit date, NLNAC accreditation status, admission cycle, number of students approved per admission,

The eighth item on the agenda was to review and consider a resolution of the Wharton City Council approving the contract between the City of Wharton and the Texas Department of

Background: The objective of this study is to assess standardized histograms of signal intensities of T1 signal and T2 signal on sagittal view without enhancement during (1)