• No results found

Thermal Design of Heat Sink and Optimization of Fin Parameters

N/A
N/A
Protected

Academic year: 2020

Share "Thermal Design of Heat Sink and Optimization of Fin Parameters"

Copied!
10
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1. Copper heat sink
Figure 3. Triangular Fin Dimension
Figure 4.Copper heat sink with rectangular fins
Figure 6. Forced Convection of fin array [3]
+5

References

Related documents

In this regard, after sales service is one cluster of services (e.g. maintenance, repair, warranty, etc.) offered to customers to optimise the utilization of the product in its

the supplementation of the mixed fodder for young gilts with the preparation pro-prebiotic Primix Bionorm K had a positive influence on the digestibility of the dry and

Incubation of peroxynitrite for Imin prior to addition of thrombin (0.02U/ml) resulted in a concentration- dependent inhibition of platelet aggregation [Figure

The objectives of the study were: 1) To determine if an increase in cereal intake by consuming RTEC, among overweight or at risk of overweight children is an effective treatment

In this study, provisions for the flexural design of com- posite beams specified in KSSC–KCI (i.e., a draft version prepared by the KSSC–KCI joint composite structure com-

The field experimental data were from the Hot Serial Cereal (HSC) experiment carried out by the USDA Arid-Land Agricultural Research Center and the University of Arizona at

This Thesis is brought to you for free and open access by the Theses, Dissertations, Capstones and Projects at USF Scholarship: a digital repository @ Gleeson Library | Geschke

Figure 3 and 4 display the etch rate of total thickness and weight loss versus etching time, respectively for the Si etched at three different HNO 3 concentrations of 20 wt%, 23 wt%