• No results found

GA27 2742 1 Operators Guide for IBM 3270 Information DIsplay Systems Jul72 pdf

N/A
N/A
Protected

Academic year: 2020

Share "GA27 2742 1 Operators Guide for IBM 3270 Information DIsplay Systems Jul72 pdf"

Copied!
136
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1. There are three basic types of 3270 display stations.
Figure 2. When the horizontal bar appears, your display station is warmed up and ready to operate
Figure 3. The image on your screen might look like this.
Figure 5. The cursor looks like an underscore.
+7

References

Related documents

The selector light pen feature supplies a hand-held, pen-like device that permits an operator of a display station to select fields of data from the display screen

If you operate the 3151 in neither SYSTEM ATTACH mode nor the mode to emulate the DEC VT220, refer also to IBM 3151 ASCII Display Station Guide to Operations when defining

For remote 3270 display systems, a combination of DOS/BT AM or as/BT AM READ and WRITE macro instructions for BSC and device control characters included in the

Check with the customer, and prace display station in the location designated by him. If it is necessary to move a display station, observe good safety

The following may be used for the monitor to display Mode 5 (27 rows by 132 columns) or Mode 6 Reference Screen (50 rows by 80 columns) if the monitor has the capability. Note: If

• Allows the user to configure the display in the following physical screen formats: - 24 rows by 80 columns (Mode 2).. - 32 rows by 80 columns (Mode 3) - 43 rows by 80 columns (Mode

The calculator is displayed on the screen with the cursor positioned at the numeric entry position for the X Register, which is located at the bottom of the

If a display ASCII code is received at the last character position of the bottom line (line 24) and Roll mode is enabled, the screen data moves up one line, the top line is