• No results found

II.D ESIGN OF RFID READER AND TAG

N/A
N/A
Protected

Academic year: 2020

Share "II.D ESIGN OF RFID READER AND TAG"

Copied!
5
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 2.  Block diagram of the embedded hardware architecture.
Fig. 3.  Comparison between LOS and NLOS location detection based on RSSI using RFID with chip antenna (a) Outdoor, (b) Indoor
Fig. 7. Location detection using GPS only without switching mechanism, (a) Outdoor, (b) Indoor
Fig. 9. Comparison of RSS values between indoor and outdoor location using  RFID only

References

Related documents

We use Perfectly Matched Layers to absorb incident waves without reflection and damp the absorbed waves, and we use a (partially) absorbing boundary condition to limit the amount

It shows that 2 × 2 array antenna with sequential rotation feeding line has wider axial ratio bandwidth and higher gain than the other models..

Thus the line through the origin with vector equation r = µb (µ ∈ R ) is fixed by the linear transformation tA represented by A, and a point on this line with position vector v

Morphological analysis of the cave ceiling portion con- sisting of sites 1A, 1B, and 1i used to identify different flow patterns (icicle, soda straw, fracture, and combined)..

Using DSSAT- CENTURY Model to Simulate Soil Organic Carbon Dynamics Under a Low-Input Maize Cropping System. Validation of soil organic carbon dynamics model in the semi-arid

A320 Rubinetto rapido universale Universal male quick coupler maschio A323 Rubinetto rapido universale per spirale Universal quick coupler for spiral hose. A321 Rubinetto

the late sixteenth century, which used the iambic pattern. almost

Earth Planets Space, 64, 345?351, 2012 Equatorial sporadic E layer abnormal density enhancement during the recovery phase of the December 2006 magnetic storm A case study L C A Resende