• No results found

Materials, Production, Properties and Application of Aerated Lightweight Concrete: Review

N/A
N/A
Protected

Academic year: 2020

Share "Materials, Production, Properties and Application of Aerated Lightweight Concrete: Review"

Copied!
6
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1.  Classification of aerated lightweight concrete
TABLE I.  TYPICAL PROPERTIES OF FOAMED CONCRETE [12]
TABLE II.  TYPICAL PROPERTIES OF AUTOCLAVED AERATED CONCRETE [12]
Figure 4.  Schematic diagram exhibiting differences between porosity and permeability [2], [17]

References

Related documents

Autoclaved aerated concrete is a lightweight, precast, foam concrete building material suitable for producing concrete masonry unit like blocks. AAC is one of the major achievements

Abstract—The popular MUSIC algorithm has been recently extended to broadband scenarios through the use of polyno- mial matrix methods and polynomial eigenvalue decomposition

The tree improvement community has responded to this challenge by developing a collaborative working arrangement between entomologists and seed orchard managers that has resulted in

Abstract The objective of this study was to investigate the effect of birth weight (BW) on future milk production and reproductive performance in Iranian Holstein

Grupo de Investigación Procesos Químicos, Catalíticos y Biotecnológicos Universidad Nacional de Colombia sede

Another polypropylene patch and e-PTFE patch, composite materials, absorbable materials and biomaterials patch must be combined with its own characteristics

Four concrete mixes labeled as M1 (Control mix), M2, M3 and M4 with different ingredients have been prepared for the experimental investigation as shown in Table 5 shows the