• No results found

After Downloading the online Application Form, Candidate shall

N/A
N/A
Protected

Academic year: 2021

Share "After Downloading the online Application Form, Candidate shall"

Copied!
43
0
0

Loading.... (view fulltext now)

Full text

(1)

LAST DATE OF RECEIPT OF APPLICATION FORM

24th June, 2013

LIST OF PLACES WHERE THE

ADMISSION APPLICATION FORM CAN BE

DEPOSITED

A

fter Downloading the online Application Form, Candidate shall deposit this form along with a fee of

For General and other categories: Rs.1250/- (Rs.250 as cost of application form and Rs.1000/- as processing fee)

For SC/ST Categories: Rs. 1000/-(Rs.250 as cost of application form and Rs.750/- as processing fee)

in the form of Bank demand draft of any bank drawn in the name of 'Secretary, PSBTE & IT, Chandigarh', and submit the same at the following places :

1. All affiliated Polytechnic Colleges of the Board.

2. Board's Office at plot No. 1-A, Sector 36-A, Chandigarh. 3. Can also be sent to the Board's Office through post /courier

(2)

NTRODUCTION

The Punjab State Board of Technical Education & Industrial Training will be holding counseling for admission to 2nd year Diploma level Engineering Courses being run in the institutions / Polytechnics located in the State of Punjab and Union Territory, Chandigarh, affiliated with the Board, for the session 2013-14. The tentative schedule of counselling is given in the prospectus, however, the exact date of counseling will be notified through the press. All candidates desirous of seeking admission are required to submit admission application form, which is available in the prospectus. The admission form complete in all respects along with requisite fee must be deposited at the Board's Office/ affiliated polytechnic colleges. Forms can also be sent through post to the Board's office at Plot No. 1-A, Sector 36-A, Chandigarh on or before 24th June, 2013.

When the application is sent by post, the fee must be deposited in the form of Demand Draft in favour of 'Secretary, Punjab State Board of Technical Education and Industrial training' payable at 'Chandigarh'.

The candidates are advised to read the entire information brochure–cum–prospectus carefully before submitting the admission application form.

1. ELIGIBILITY CRITERIA FOR LATERAL ENTRY TO

DIPLOMA ENGINEERING COURSES.

All those candidates who have passed the following examinations would be eligible for consideration for Lateral Entry 2013-14 in various diploma courses: a) i) 12th Science with Vocational/Technical

OR 10th + (2 years ITI)

Students passing 12th Science with Vocational/ Technical subjects or 10th + (2 years ITI) in that order shall be eligible for admission to second year Diploma Courses of appropriate program upto a maximum of 20% of sanctioned intake.

b) Provided however if seats remained vacant then the same will be filled on the basis of inter-se-merit as per the below mentioned eligibility criteria:

i) ITI at least with one year (who passed 10th level School Leaving Examination before admission to ITI courses) from any Institution of Punjab/ Other state.

ii) 10+2 vocational examination in various branches from any institute of Punjab/ Other State.

iii) 10+2 with science from any institute of Punjab / Other state.

iv) Two years certificate course from Sant Longowal Institute of Engineering and Technology, Longowal and have Punjab Domicile.

2. SUBMISSION OF ADMISSION FORM

1. Admission application on the prescribed form (Attached at the end of this prospectus) complete in all respects must reach the Board's Office by Registered post or submitted personally in the Board's office on or before 24th June, 2013. Candidates should ensure that the particulars mentioned in the admission application form are correct and complete. Incomplete application forms will be rejected and the candidate will not be considered for admission.

2. No separate admission form is required for admission in the institutions located in Chandigarh. 3. All entries in the admission form must be in the

candidate’s own hand.

4. No copies of the certificates are to be attached with the Admission Form. Original certificates are to be shown while reporting at the institutes.

5. Fees of Rs. 1250/- (Rs. 1000/- for SC/ST category) in the form of Demand Draft in favour of "Secretary, Punjab State Board of Technical Edu. and Industrial Training" payable at "Chandigarh".

6. The admission application shall be rejected if – i) The entries are incomplete.

ii) The candidate is ineligible to apply for admission.

iii) Applications not accompained by requisite fee.

3. PROCEDURE FOR ON-LINE COUNSELING

National Informatics Centres (NIC), New Delhi has been entrusted with the task of implementing ON-LINE OFF CAMPUS counseling. The procedure to be followed for ON-LINE OFF CAMPUS counseling is as under.

Objectives

The Board has adopted ON-LINE OFF CAMPUS counseling with following objectives:

1 To bring 100% transparency in seats allotment and admissions.

2 To build strong public interface to minimize travel burdens on the students and their parents for counseling.

3 To prov iding enough tim e to students f or submission, change, delete, selection of multiple choices courses/institutes from anywhere any time.

(3)

5 To organize centralized database and centralized monitoring.

6 To achieve Paper-Less counseling.

7 To make secured and controlled data access at every level.

Strategies

NIC has been entrusted to accomplish the task of Software development, testing and implementation of Web based ON-LINE OFF CAMPUS counselling for admissions to all AICTE approved technical diploma level courses being run in all technical institutions in the State. NIC has been successfully developing and implementing the ON-LINE-OFF-CAMPUS counselling for AIEEE rank holders in the country for last 4-5 years. To achieve the said objectives, a website shall be launched by National Informatics Centres (NIC), the premier Science & Technology organization of Government of India under Union Ministry of Information Communication and Technology. The website shall entail all the information, procedures, instructions and guidelines for online counseling.

1. Admissions shall be made through ON-line counseling by NIC, in collaboration with the Board. Detailed instructions for online admission procedure will also be available on Board’s websites www. punjabteched.net and www.punjabteched.com. 2. To participate in ON-LINE counseling, it shall be

mandatory for every candidate to register through counseling website as per schedule available on the website.

3. The candidates who participate successfully in the counseling will be required to exercise their initial choices of branches and Institutes through Internet from places of their convenience or the designated polytechnics.

4. The procedure for exercising choices or seeking other information is simple and menu driven. It shall guide the candidates by appropriate messages on the computer screen.

5. After declaration of the result of the 1st counseling, the candidates shall be directed to report in the allocated institute for verification of requisite testimonials in original. The admission of the candidates shall be confirmed after depositing the

6. After joining by a candidate at the designated Polytechnic, such institute shall update the status of joining/ non reporting online. Students joining the Institutes can also see the list of admitted students under one particular Institute at the counseling site "www.psbte.gov.in"

7. The candidates, who would like to upgrade their earlier allotted seats in the 1st counseling are also permitted to participate in the subsequent counseling. In such cases, if candidate is allotted a seat in subsequent counsellings, his previous allotment of seat stand automatically cancelled and the candidate shall not hav e any claim whatsoever on the previous allotment.

8. At the time of candidate reporting for verification of certificates and confirmation of the seat, the institute shall confirm his admission only after verifying his testimonials in original and proof of fee deposited.

Candidates must bring the following certificates at the time of admission (reporting to the institute) :

1. Original Certificates:

 Qualifying Examination Detail Marks Sheet

 Matriculation Certificates (Date of Birth)

 Character Certificate from institutions last attended

 Proof of Residence/Domicile Certificate

 Certificate in support of claim under reserved category.

Candidates who fail to produce the requisite documents will not be admitted.

2. Attested copies of above certificates. 3. One recent stamp size photograph.

V. NUMBER OF SEATS :

The number of seats allocated for each course in each institution is available in the Government Notification. VI. FEES :

The fee structure for all the institutions shall be as per policy of respective Governments. The latest fee structure is available at the end of the prospectus. The security amount deposited by the candidates shall be refunded to them on successful completion of Diploma course by the concerned institution.

(4)

Important Note : Before reporting at the allocated institute, the candidates are required to deposit the requisite semester fee in the designated bank branches within the stipulated time.

VII. REFUND OF FEES :

In the event of a student/candidate surrendering the seat before starting of the course, the entire fee collected from the student after a deduction of the processing fee of not more than Rs. 1000/- shall be

refunded. However if a student leaves after joining the course and the seat consequently falls vacant is filled by another candidate by the last date of admission, the fee shall be refunded after making proportionate deductions of fee and hostel rent (where applicable). The request for refund of fee should be made to the Board as well as to the concerned institute within 30 days of the end of counseling through online submission of the application in the counselling website.

ATTENTION :

One-third of the total seats available

in the un-aided institutes have been

marked as "Seats under management

quota". The admission for the same

shall be made at the level of the

institute after the declaration of the

result of the 2nd counselling. Those

candidates desirous of seeking

admission under management quota

shall register on to the Board Website

for the purpose of allocation of the

registration number.

t the closure of Online counseling,

the vacant seats, if any, shall be filled at

level of the institutes. Candidates seeking

admission against these seats shall register

on to the Board Website for the purpose of

allocation of the registration number.

A

The resultant vacant seats in first

year of Diploma in Engineering and

Technology of session 2012-13 shall

also be filled on the basis of Lateral

Entry to Diploma Engineering

Courses as per precedent in Degree

Engineering and Technology in

session 2012-13.

The detail of the vacant seats are

available on the Board's websites.

(5)

NOTIFICATION

No : 13/15/11-1TE2/399 Dated:06.05.2013, Chandigarh, the

The Governor of Punjab is pleased to appoint the Punjab State Board of Technical Education & Industrial Training, Chandigarh (hereinafter the Board) as the authority competent to make admissions to the 2nd year diploma level Engineering Courses under LEET Scheme being run in all the institutions/ Polytechnics mentioned below located in the State of Punjab and Union Territory, Chandigarh, which are affiliated with the Board, for the session 2013-2014.

Sr. Name of the Name of the Courses Intake as

No. Institution Sanctioned by AICTE

Morning Evening

1. Government Polytechnic 1. Civil Engineering 12

College, Amritsar 2. Electrical Engineering 12

3. Mechanical Engineering 9

4. Mech. Engg. (Refrigeration & Air Conditioning) 3 5. Production and Industrial Engineering 12

6. Computer Engineering 12

7. Information Technology 6

2. Government Polytechnic 1. Civil Engineering 12

College, Batala 2. Electrical Engineering 12

3. Mechanical Engineering 12

4. Electronics & Communication Engineering 12

5. Chemical Engineering 12

3. Government Polytechnic 1. Production & Industrial Engineering 6 College, Bathinda. 2. Architectural Assistantship 6 3. Electronics & Comm. Engineering 12

4. Computer Engineering 12

5. Information Technology 12

6. Mechanical Engineering 6

7. Electrical Engineering 12

8. Civil Engineering 6

4. Government Polytechnic 1. Electrical Engineering 12

College, Ferozepur 2. Mechanical Engineering 12

3. Electronics & Communication Engineering 12

4. Computer Engineering 12

5. Government Polytechnic 1. Civil Engineering 8

College, Guru Teg Bahadurgarh 2. Electrical Engineering 12

Distt Moga 3. Mechanical Engineering 12

4. Electronics & Communication Engineering 12

5. Chemical Engineering 6

6. Computer Engineering 12

6. Pt. J.R. Government Polytechnic 1. Civil Engineering 12

College, Hoshiarpur 2. Electrical Engineering 12

3. Mechanical Engineering 12

4. Electronics & Communication Engineering 12

5. Plastic Technology 12

6. Computer Engineering 12

7. Government Polytechnic 1. Mechanical Engineering 12

(6)

Distt Tarn Taran 3. Electrical Engineering 6 4. Electronics & Communication Engineering 6 8. Government Polytechnic 1. Mechanical Engineering 12

College, Khunimajra (Mohali) 2. Electrical Engineering 12 3. Electronics & Communication Engineering 18

4. Computer Engineering 12

5. Medical Lab. Technology 8

9. Baba Heera Singh Bhattal 1. Information Technology 12 Institute of Engineering and 2. Electronics & Communication Engineering 12 Technology(Polytechnic Wing), 3. Computer Engineering 24

Lehragaga 4. Mechanical Engineering 12

5. Electrical Engineering 12

10. Government Polytechnic 1. Library & Information Science 6 College for Girls, Jalandhar. 2. Electronics & Communication Engineering 12

3. Computer Engineering 12

4. Chemical Engineering 6

5. Architectural Assistantship 6

6. Information Technology 6

11. Government Polytechnic 1. Architectural Assistantship 12 College for Girls, Patiala. 2. Medical Lab. Technology 12 3. Electronics & Communication Engineering 18

4. Information Technology 12

5. Computer Engineering 12

12. Mai Bhago Government 1. Architectural Assistantship 6 Polytechnic College for Girls, 2. Medical Lab. Technology 12 Amritsar 3. Electronics & Communication Engineering 12

4. Computer Engineering 12

13. Satguru Ram Singh, 1. Garment Manuf. Technology 12

Government Polytechnic 2. Computer Engineering 12

College for Girls, Ludhiana 3. Electronics & Communication Engineering 12

4. Informatoin Technology 12

5. Fashion Designing 12

14. Government Polytechnic 1. Computer Engineering 12 College for Girls, Dinanagar 2. Electronics & Communication Engineering 12

15. Government Institute of 1. Textile Processing 8

Textile Chemistry and Knitting 2. Textile Technology 8 Technology, Ludhiana (Knitting)

16. Government Tanning 1. Leather Technology 5

Institute, Jalandhar 2. Leather Technology (Footwear) 6

17. Government Institute of 1. Garment Technology 8

Garment Technology, Amritsar 2. Fashion Technology 6 18. Punjab Institute of Textile 1. Textile Technology 12

Technology, Amritsar 2. Textile Design 8

Sr. Name of the Name of the Courses Intake as No. Institution Sanctioned by AICTE

(7)

19. Beant College of Engg. 1. ECE 12 & Teh. (Poy. Wing), Gurdaspur 2. Mechanical Enginering 12

3. Computer Engineering 12

20. Shaheed Bhagat Singh College 1. ECE 24

of Engg. & Tech. (Poly. Wing), 2. Mechanical Enginering 24

Ferozepur 3. Computer Engineering 12

4. Electrical Engineering 12

21. Giani Zail Singh College of 1. ECE 12

Engg. & Technology, (Poly wing) 2. Computer Engineering 12

Bathinda 3. Mechancial Engineering 12

4. Electrical Engineering 12

5. Civil Engineering 12

22. Chandigarh College of 1. Civil Engineering 8

Engineering & Technology. 2. Electrical Engineering 10

Chandigarh 3. Mechanical Engineering 12

4. Architectural Assistantship 6 5. Electronics & Communication Engineering 6 6. Production & Industrial Engineering 6

7. Computer Engineering 6

23. Government Polytechnic for 1. Architectural Assistantship 6 Women, Chandigarh. 2. Electronics & Communication Engineering 8 3. Library & Information Science 6 24. Central Tool Room, 1. Mechanical Engineering (Tool & Die) 12

A-5, Focal Point, Ludhiana

25. Central Institute of Hand Tools, 1. Mechanical Engineering (Tool & Die) 08 G.T. road, By-Pass, Jalandhar

26. Mehr Chand Polytechnic 1. Civil Engineering 12 12

College, Jalandhar 2. Electrical Engineering 12 12

3. Mechanical Engineering 12 12

4. Electronics & Communication Engineering 12 12

5. Computer Engineering 12 12

6. Automobile Engineering 12

27. Ramgarhia Polytechnic 1. Civil Engineering 12 12

College, Phagwara 2. Electrical Engineering 12

3. Mechanical Engineering 12 12

4. Electronics & Communication Engineering 12

5. Computer Engineering 12

28. Guru Nanak Dev Polytechic 1. Civil Engineering 12

College, Ludhiana 2. Electrical Engineering 12

3. Mechanical Engineering 12

4. Electronics & Communication Engineering 12

5. Computer Engineering 12

6. Automobile Engineering 12

29. Thapar Polytechnic College, 1. Civil Engineering 4

(8)

3. Mechanical Engineering 8 4. Architectural Assistantship 4

5. Computer Engineering 24

6. Information Technology 6

7. Electronics & Communication Engineering 24 30. Adesh Polytechnic College, 1. Computer Engineering 24 Muktsar. 2. Electronics & Communication Engineering 24

3. Electrical Engineering 12

4. Mechanical Engineering 24

5. Information Technology 12

6. Automobile Engineering 12

7. Civil Engineering 12

31. G.T.B Khalsa Polytechnic 1. Electronics & Communication Engineering 36 College, Chappianwali, Malout 2. Computer Engineering 24

3. Electrical Engineering 24

4. Mechanical Engineering 24

5. Information Technology 12

6. Automobile Engineering 12

7. Civil Engineering 12

32. Shaheed Bhagat Singh 1. Computer Engineering 24 18

Polytechnic College, Patti. 2. Electronics & Comm. Engineering 24 18

3. Mechanical Engineering 24 18

4. Electrical Engineering 12 –

5. Automobile Engineering 12 –

33. Baba Isher Singh Polytechnic 1. Medical Lab. Technology 6 – College, Kot-Ise-Khan, Moga. 2. Electronics & Communication Engineering 24 24

3. Computer Engineering 20 20

4. Electrical Engineering 18 18

5. Information Technology 8 8

6. Mechanical Engineering 24 24

7. Civil Engineering 16 16

34. Sai Polytechnic College, 1. Electronics & Communication Engineering 12 12

Badhani, Pathankot 2. Computer Engineering 24 24

3. Mechanical Engineering 48 36

4. Information Technology 12 12

5. Electrical Engineering 12 12

6. Civil Engineering 36 24

35. Sardar Bahadur Captain 1. Electronics & Communication Engineering 36 12 Mehtab Singh Institute of 2. Computer Engineering 36 12 Technology College, Attalgarh 3. Mechanical Engineering 48 12

Mukerian 4. Electrical Engineering 12 12

5. Civil Engineering 24 12

36. Lala Lajpat Rai Memorial 1. Electronics & Communication Engineering 12 12

Polytechnic College, 2. Computer Engineering 24 24

Ajitwal (Moga) 3. Mechanical Engineering 36 36

4. Electrical Engineering 12 12

5. Information Technology 18 18

6. Electronics & Telecommunication Engineering 12 12

Sr. Name of the Name of the Courses Intake as No. Institution Sanctioned by AICTE

(9)

7. Automobile Engineering 12 12

8. Civil Engineering 12 12

9. Mechanical Engineering (Tool & Die) 12 12 37. Guru Gobind Singh Polytechnic 1. Computer Engineering 24 24

College Mansa Road, Talwandi 2. Electronics & Communication Engineering 36

Sabo, (Bathinda) 3. Information Technology 12

4. Mechanical Engineering 30 24

5. Electrical Engineering 18 12

6. Civil Engineering 18 12

38. Doaba Polytechnic College, 1. Computer Engineering 24 Raipur, PO Majra Jattan 2. Electronics & Communication Engineering 36

(S.B.S. Nagar) 3. Mechanical Engineering 36

4. Electrical Engineering 12

5. Information Technology 24

6. Automobile Engineering 12

39. Shri Guru Gobind Singh College 1. Medical Lab. Technology 24 Sector 26, Chandigarh

40. Saint Kabir Polytechnic 1. Electronics & Communication Engineering 24

College, Fazilka 2. Computer Engineering 24

3. Mechanical Engineering 12

4. Electrical Engineering 12

5. Information Technology 12

41. R&D Centre for Bicycle & 1. Production & Industrial Engineering 12

Sewing Machine, Ludhiana 2. Mechanical Engg 24

3. Automobile Engineering 12

4. Computer Engineering 12

42. Longowal Polytechnic and 1. Computer Engineering 24

-Pharmacy College, Dera Bassi 2. Electronics & Communication Engineering 24

-3. Electrical Engineering 12 12

4. Mechanical Engineering 36 24

5. Civil Engineering 12

43. Lord Krishana Polytechnic 1. Electronics & Communication Engineering 12 12

College, Kapurthala 2. Computer Engineering 24 18

3. Mechanical Engineering 24 24

4. Electrical Engineering 12 12

5. Medical Lab.Technology 6 6

6. Automobile Engineering 12 12

7. Civil Engineering 12

44. Desh Bhagat Polytechnic 1. Electronics & Communication Engineering 12 College, Bardwal, Dhuri 2. Computer Engineering 18

3. Mechanical Engineering 24

4. Electrical Engineering 12

5. Automobile Engineering 12

6. Civil Engineering 12

45. Rayat Polytechnic College, 1. Electronics & Communication Engineering 36 12 Railmajra (S.B.S. Nagar) 2. Mechanical Engineering 48 24

3. Electrical Engineering 12 12

(10)

5. Auto Mobile Engineering 12 –

6. Information Technology 12

46. Malwa Polytechnic College, 1. Electronics & Communication Engineering 24

Faridkot 2. Computer Engineering 36

3. Mechanical Engineering 24

4. Electrical Engineering 12

5. Automobile Engineering 12

6. Information Technology 12

7. Civil Engineering 12

47. GGS Polytechnic College, 1. Electronics & Communication Engineering 24

Kharar 2. Computer Engineering 24

3. Mechanical Engineering 36 36

4. Electrical Engineering 12 12

5. Information Technology 12

6. Civil Engineering 24 12

48. Shaheed Udham Singh 1. Electronics & Communication Engineering 24 Polytechnic College, Tangori, 2. Electrical Engineering 18

Mohali 3. Mechanical Engineering 36

4. Medical Lab Technology 6

5. Computer Engineering 36

6. Civil Engineering 12

7. Information Technology 12

49. YRS Polytechnic College, Moga 1. Electronics & Communication Engineering 12

2. Electrical Engineering 12

3. Mechanical Engineering 36

4. Computer Engineering. 24

5. Civil Engineering 24

6. Automobile Engineering 12 –

50. Guru Nanak Institute of 1. Electronics & Communication Engineering 24 12 Technology College, Dalewal 2. Electrical Engineering 24 12

(Hoshiarpur) 3. Mechanical Engineering 48 12

4. Computer Engineering 36 12

5. Civil Engineering 24 12

51. Punjab Polytechnic College, 1. Electronics & Communication Engineering 12 12

Lalru Mandi 2. Computer Engineering 12 –

3. Mechanical Engineering 48 48

52. CT Polytechnic College, 1. Electronics & Communication Engineering 24 Vill. Shahpur, Jalandhar 2. Mechanical Engineering 24

3. Computer Engineering 24

4. Medical Lab Technology 6

5. Electrical Engineering 18

6. Automobile Engineering 18

7. Information Technology 12

8. Civil Enggneeing 24

53. VMS Polytechnic College, 1. Electronics & Communication Engineering 18 Batala, Distt. Gurdaspur 2. Mechanical Engineering 18

Sr. Name of the Name of the Courses Intake as No. Institution Sanctioned by AICTE

(11)

3. Electrical Engineering 12

4. Medical Lab Technology 6

5. Computer Engineering 18

6. Information Technology 12

7. Civil Enggneeing 12

54. Aman Bhalla Polytechnic 1. Electronics & Communication Engineering 18 College, Kotli, Pathankot 2. Mechanical Engineering 48

3. Electrical Engineering 18

4. Computer Engineering 12

5. Information Technology 12

6. Civil Engineering 24

7. Automobile Engineering 12

55. RIMT Polytechnic College, 1. Electronics & Communication Engineering 36 24

Mandi Gobindgarh 2. Mechanical Engineering 36 24

3. Electrical Engineering 24 —

4. Computer Engineering 36 24

5. Information Technology 12 —

6. Civil Engineering 24

56. Bhai Gurdas Polytechnic 1. Electronics & Communication Engineering 12

College, Sangrur 2. Mechanical Engineering 24

3. Computer Engineering 24

4. Electronics & Telecommunication Engineering 12

5. Information Technology 12

6. Civil Engineering 12

7. Electrical Engineering 12

57. Saint M Muni Ji Borewala 1. Electrical Engineering. 24

Polytechnic College, 2. Mechanical Engineering 24

VPO Fatta Maluka, 3. Electronics & Communication Engineering 12

Distt. Mansa 4. Computer Engineering 24

58. S.Sukhjinder Singh Polytechnic 1. Electrical Engineering 18

College, Hayat Nagar Gurdaspur 2. Mechanical Engineering 30 18 3. Electronics & Communication Engineering 18

4. Computer Engineering 24

5. Civil Engineering 30 18

59. K.C. Polytechnic College, 1. Mechanical Engineering 24 Kariam Road, Nawanshahr 2. Electronics & Communication Engineering 24

3. Computer Engineering. 24

4. Information Technology 12

5. Civil Engineering 24

6. Automobile Engineering 12

60. Baba Banda Singh Bahadur 1. Mechanical Engineering 24 Polytechnic College, 2. Electronics & Communication Engineering 24

Fatehgarh Sahib 3. Computer Engineering. 24

4. Information Technology 12

5. Civil Engineering 12

(12)

61. Swami Permanand Polytechnic 1. Electronics & Communication Engineering 12 College, Village Jaulan Kalan, 2. Computer Engineering 12 (Lalru), Distt. Mohali 3. Mechanical Engineering 48

4. Automobile Engineering 12

5. Electrical Engineering 24

6. Civil Engineering 12

62. Abohar Polytechnic College, 1. Mechanical Engineering 24 12 Abohar 2. Electronics & Communication Engineering 24 12 3. Electronics & Tele communication Engineering 12

-4. Computer Engineering 24 12

5. Information Technology 12

6. Electrical Engineering 12 12

7. Civil Engineering 12 12

63. Abnoor Polytechnic College, 1. Electronics & Communication Engineering 24

Faridkot 2. Computer Engineering 24

3. Electrical Engineering 12

4. Mechanical Engineering 24

5. Civil Engineering 12

6. Information Technology 12

64. G.E.S. Polytechnic College, 1. Electronics & Communication Engineering 12

Hoshiarpur 2. Computer Engineering 24

3. Civil Engineering 24

4. Mechanical Engineering 36

5. Electrical Engineering 12

65. Sai Polytechnic College, 1. Electronics & Communication Engineering 18 12

Manawala, Amritsar 2. Computer Engineering 24 12

3. Information Technology 12 12

4. Mechanical Engineering 36 24

5. Civil Engineering 24 24

6. Electrical Engineering 12

66. Satyam Poly. & Pharmacy 1. Electronics & Communication Engineering 24

College, Amritsar 2. Computer Engineering 24

3. Mechanical Engineering 24

4. Information Technology 12

5. Civil Engineering 24

6. Automobile Engineering 12

7. Electrical Engineering 12

67. Saraswati Polytechnic College, 1. Electronics & Communication Engineering 24

Balluana, Malout Road 2. Computer Engineering 24

Bathinda 3. Electrical Engineering 24

4. Mechanical Engineering 24

5. Civil Engineering 12

6. Information Technology 12

68. Regional Polytechnic College, 1. Electronics & Communication Engineering 24 Behman Diwana, Bathinda 2. Computer Engineering 24

3. Mechanical Engineering 36

4. Electrical Engineering 24

5. Information Technology 12

6. Civil Engineering 12

Sr. Name of the Name of the Courses Intake as No. Institution Sanctioned by AICTE

(13)

69. Vidya Sagar Poly. College, 1. Electronics & Communication Engineering 12

Dhuri 2. Computer Engineering 12

3. Electrical Engineering 12

4. Mechanical Engineering 24

5. Information Technology 12

70. Universal Poly. College, 1. Electronics & Communication Engineering 12

Borewal, Near Budhlada 2. Computer Engineering 24

Distt. Mansa 3. Civil Engineering 12

4. Mechanical Engineering 24

71. Jiwan Jyoti Poly. College, 1. Electronics & Communication Engineering 12

Jalalabad (Ferozepur) 2. Computer Engineering 12

3. Electrical Engineering 12

4. Mechanical Engineering 12

5. Electronics & Telecommunication Engineering 12 72. M.L. Memorial Polytechnic 1. Electronics & Communication Engineering 24 College, Killi Chalan (Moga) 2. Computer Engineering 18

3. Electrical Engineering 12

4. Mechanical Engineering 24

5. Information Technology 12

6. Civil Engineering 12

7. Automobile Engineering 12

73. Punjab Institute of Technical, 1. Civil Engineering 12 Education, Distt. Vill. Sarkapra 2. Mechanical Engineering 12 Near Chunni Kalan, Fatehgarh 3. Electronics & Communication Engineering 12

Sahib 4. Computer Engineering 12

74. Barnala Polytechnic Barnala- 1. Civil Engineering 12 Dhanaula Road, Barnala 2. Electrical Engineering 12

3. Mechanical Engineering 24

4. Electronics & Communication Engineering 12

5. Computer Engineering 12

75. B.R. Mahendra Polytechnic, 1. Civil Engineering 24 Vill. Jajjal, Raman Mandi, 2. Mechanical Engineering 24 Distt. Bathinda 3. Electronics & Communication Engineering 12

4. Computer Engineering 24

5. Information Technology 12

6. Electrical Engineering 12

76. Jasdev Singh Sandhu Poly., 1. Civil Engineering 12 College, Kauli Distt. Patiala 2. Mechanical Engineering 12 3. Electronics & Communication Engineering 12

4. Computer Engineering 12

5. Information Technology 12

77. Guru Ram Dass Polytechnic 1. Electrical Engineering 12 College, Bathinda Kotkapura 2. Mechanical Engineering 18 Road Jeeda Distt. Bathinda 3. Electronics & Communication Engineering 12

4. Computer Engineering 18

(14)

78. Universal Polytechnic College, 1. Mechanical Engineering 24 Ballopur (Lalru Mandi), 2. Electronics & Communication Engineering 12

Distt. Mohali 3. Computer Engineering 12

4. Electrical Engineering 6

5. Civil Engineering 12

79. Bahra Poly College , 1. Mechanical Engineering 24 Patiala Sangrur Road Near 2. Electronics & Communication Engineering 12 Parmashwar Darbar, Patiala 3. Computer Engineering 12

4. Civil Engineering 12

5. Electrical Engineering 12

80. Pathankot Polytechnic College, 1. Civil Engineering 12

Pathankot 2. Mechanical Engineering 12

3. Electronics & Communication Engineering 12

4. Computer Engineering 12

81. Patiala Polytechnic College, 1. Electrical Engineering 24 Vill. Rakhra, Distt. Patiala 2. Mechanical Engineering 24 3. Electronics & Communication Engineering 12

4. Computer Engineering 24

5. Information Technology 12

82. Vidya Ratan Poly. College, 1. Electrical Engineering 12 Khokhar Distt. Sangrur 2. Mechanical Engineering 24 3. Electronics & Communication Engineering 12

4. Computer Engineering 12

5. Information Technology 12

6. Civil Engineering 12

83. Bhai Gurdas Global Poly., 1. Electrical Engineering 12 College, Vill. Rakhara Distt. 2. Mechanical Engineering 18 Patiala 3. Electronics & Communication Engineering 12

4. Computer Engineering 12

5. Automobile Engineering 12

6. Civil Engineering 12

84. Akal Polytechnic College, 1. Electrical Engineering 18

Barnala 2. Mechanical Engineering 24

3. Electronics & Communication Engineering 12

4. Computer Engineering 12

5. Information Technology 12

85. Hi Tech. Polytechnic College, 1. Civil Engineering 12 Vill. Jai Singh Wala, 2. Electrical Engineering 12 Badal Road, Distt. Bathinda 3. Electronics & Communication Engineering 12

4. Computer Engineering 12

5. Information Technology 12

6. Mechanical Engineering 12

86. Aklia Polytechnic College,Vill. 1. Civil Engineering 12 Aklia Kalan, P.O. Goniana 2. Mechanical Engineering 12 Mandi. Distt. Bathinda 3. Electronics & Communication Engineering 12

4. Computer Engineering 12

5. Information Technology 12

Sr. Name of the Name of the Courses Intake as No. Institution Sanctioned by AICTE

(15)

87. Punjab Polytechnic College, 1. Civil Engineering 12 Vill. Raipur Near Bahadurgarh 2. Mechanical Engineering 12 Distt.Patiala 3. Electronics & Communication Engineering 12

4. Computer Engineering 12

5. Electrical Engineering 12

88. Vidya Sagar Inst. of Poly. & 1 ECE 12

Ph'cy College, Ahlupur, 2. Computer Engg. 12

Teh. Sardulgarh, 3. Elect. Engg. 12

Distt. Mansa 4. Mechanical Engg. 12

5. Information Technology 12

89. Sant Solider Polytechnic 1. Civil Engineering 12

College, Jalandhar 2. Mechanical Engineering 24

3. Electronics & Communication Engineering 12

4. Computer Engineering 12

5. Electrical Engineering 12

90. Radiance Polytechnic College, 1. Civil Engineering 12 Pahuwind Distt Tarn Taran. 2. Electrical Engineering 12

3. Mechanical Engineering 12

4. Electronics & Communication Engineering 12

5. Computer Engineering 12

91 Abhishek Polytechnic College, 1. Civil Engineering 12 VPO Dolatpura, Teh. Abohar 2. Electrical Engineering 12

3. Mechanical Engineering 12

4. Electronics & Communication Engineering 12

5. Computer Engineering 12

92 Ludhiana Polytechnic College, 1. Civil Engineering 12 VPO Kube Teh.Samrala, 2. Electrical Engineering 12

Distt. Ludhiana 3. Mechanical Engineering 24

4. Electronics & Communication Engineering 12

5. Computer Engineering 12

93 Baba Banda Singh Bahadur 1. Civil Engineering 24

Global Poly.College, VPO 2. Electrical Engineering 12 Indergarh Distt. Moga, Punjab 3. Mechanical Engineering 24 4. Electronics & Communication Engineering 12

5. Computer Engineering 12

94 Dr. IT Polytechnic College, 1. Civil Engineering 24 Vill Jalalpur, PO Jansla, 2. Electrical Engineering 12 Near Banur Teh. & Distt. Patiala 3. Mechanical Engineering 24 4. Electronics & Communication Engineering 12

5. Computer Engineering 12

95 Modern Polytechnic College, 1. Civil Engineering 12 Bir Kalan, Distt. Sangrur 2. Electrical Engineering 12

3. Mechanical Engineering 12

4. Electronics & Communication Engineering 12

(16)

96 New Punjab Poly. College, 1. Civil Engineering 12 Nangal, Distt. Bathinda, Punjab 2. Electrical Engineering 12

3. Mechanical Engineering 12

4. Electronics & Communication Engineering 12

5. Computer Engineering 12

97 Chandigarh Polytechnic College, 1. Civil Engineering 24 VPO Gharuan, Distt. Mohali, 2. Electrical Engineering 12

Punjab 3. Mechanical Engineering 36 12

4. Electronics & Communication Engineering 12

5. Computer Engineering 12

6. Mechanical Engg. (Tool & Die) 12 12 98 Nancy Polytechnic College 1. Civil Engineering 12

Samana Patran Road, Samana 2. Electrical Engineering 12

3. Mechanical Engineering 12

4. Electronics & Communication Engineering 12

5. Computer Engineering 12

99 Bhai Mani Singh Poly. College, 1. Civil Engineering 12 Dualpura Bhai Ka, Teh. 2. Electrical Engineering 12 Rampura Phul Distt. Bathinda 3. Mechanical Engineering 12 4. Electronics & Communication Engineering 12

5. Computer Engineering 12

100 Guru Arjan Dev Polytechnic, 1. Civil Engineering 12 Vill Kiri Bhumal, Distt Ludhina 2. Electrical Engineering 12

3. Mechanical Engineering 24

4. Electronics & Communication Engineering 12

5. Computer Engineering 24

6. Automobile Engineering 12

101 Pannu Polytechnic College, 1. Civil Engineering 12 Marri Pannuan, Distt. Gurdaspur 2. Electrical Engineering 12

Punjab 3. Mechanical Engineering 12

4. Electronics & Communication Engineering 12

5. Computer Engineering 12

102 Bankey Bihari Poly. College, 1. Civil Engineering 12 VPO Alamgarh, Teh Abohar 2. Electrical Engineering 12

3. Mechanical Engineering 12

4. Electronics & Communication Engineering 12

5. Computer Engineering 12

103 Guru Teg Bahadu Poly. Collge, 1. Civil Engineering 12 Vill Harigarh, Teh. Nabha, 2. Electrical Engineering 12

Patiala 3. Mechanical Engineering 12

4. Electronics & Communication Engineering 12

5. Computer Engineering 12

104 Maharaja Aggarsain Institute of 1. Civil Engineering 12 Technology, Abohar, Punjab 2. Electrical Engineering 12

3. Mechanical Engineering 12

4. Electronics & Communication Engineering 12

5. Auto Engineering 12

Sr. Name of the Name of the Courses Intake as No. Institution Sanctioned by AICTE

(17)

105 Brahm Kamal Poly. College, 1. Civil Engineering 12 Vill Fattuwal, Teh. Mukerian, 2. Electrical Engineering 12

Distt. Hoshiarpur 3. Mechanical Engineering 12

4. Electronics & Communication Engineering 12

5. Computer Engineering 12

106 Swami Vivekanand Poly.College, 1. Civil Engineering 12 Ramnagar, Banur, Teh. Rajpura 2. Information Technology 12

Distt. Patiala 3. Mechanical Engineering 12

4. Electronics & Communication Engineering 12

5. Computer Engineering 12

107 Kartar Polytechnic College, Vill. 1. Civil Engineering 12 Phangrian, P.O.Jakolari,Teh. 2. Electrical Engineering 12 Pathankot, Distt. Gurdaspur 3. Mechanical Engineering 12 4. Electronics & Communication Engineering 12

5. Computer Engineering 12

108. Baba Bidhi Chand Polytechnic 1. Electronics & Communication Engineering 12 College, Village Nazu Shah, 2. Mechanical Engineering 12 Misri Zira Road, Ferozepur 3. Electronics & Tele Comm. Engg. 12

4. Computer Engineering 12

5. Information Technology 12

6. Civil Engineering 12

7. Electrical Engineering 12

109. Bhutta Polytechnic College, 1. Comp. Science and Engg. 12 Alamgir Rara Sahib Road, 2. Electronics and Comm. Engg. 12 VPO Bhutta, Distt. Ludhiana 3. Civil Engineering 24

4. Mechanical Engineering 24

5. Electrical Engineering 12

110. DIPS Polytechnic College, 1. Civil Engineering 12 Rarr Morr, Jalalpur, Tanda, 2. Computer Science and Engg. 12 Tehsil Dasuya, Distt Hoshiarpur 3. Electrical Engineerin 12 4. ECE (Industry Integratged) 12 5. Mechanical Engg. (Tool & Die) 12 111. Doaba Polytechnic College, Vill. 1. Mechanical Engineering 12 Ghataur, Teh. Kharar, Distt. 2. Computer Engineering 12

Mohali 3. Electrical Engineering 12

4. Electronics & Communication Engineering 12

5. Civil Engineering 12

112 Gyan gun Sagar Polytechnic 1. Civil Engineering 12 Coll. Bathinda Mansa Road, 2. Computer Science and Engg. 12 Master Khan Maur, Mandi, 3. Electronics & Communication Engineering 12

Distt. Bathnda 4. Mechanical Engineering 12

5. Electrical Engineering 12

122. Sidana Polytechnic, College 1. Mechanical Engineering 12 Vill. Khiala Khurd Near Ram 2. Civil Engineering 12 Tirath, Amritsar, Lopoke Road 3. Computer Engineering 12 4. Electrical & Electronic Engg. 12 5 Electronics and Comm. Engineering 12

(18)

113 Ludhiana Group of College. 1. Computer Science Engineering 12 Polytechnic , VIll. Chowk 2. Electronics & Communication Engineering 12 Chowkimann, Teh. Jagraon 3. Mechanical Engineering 24

Dist. Ludhiana 4. Electrical Engineering 12

5. Civil Engineering 24

114. Ropar Technical Campus, Vill 1. ECE 12

Shekhupur, PO Bela Teh. 2. Electrical Engineering 12 Shri Chamkaur Sahib, Dist. 3. Computer Science Engineering 12

Ropar 4. Civil Engineering 24

5. Mechanical Engineering 24

115. Satyam College of Polytechnic, 1. ECE 12

Vill. Allowal, Teh. Nakodar 2. Mechanical Engg. 12 Dist. Jalandhar 3. Electrical & Electronics Engg. 12

4. Computer Engineering 12

5. Civil Engineering 12

116. Sri Sukhmani Polytechnic 1. Mechanical Engineering 12 College, Dera Bassi, Dist. 2. Civil Engineering 12

Mohali 3. Computer Science Engineering 12

4. Electrical Engineering 12

5. Electronics & Communication Engineering 12

117. Sukhjinder Technical Campus 1. Civil 12

Pathankot. Dallhousie Road, 2. Mechanical Engg 12

Teh. Dhar Kalan Distt. Pathankot 3. Electrical Engineering 12

4. Computer Engineering 12

5. Electronics & Communication Engineering 12

118. Guru Hargobind Polytechnic 1. Computer Science Engineering 12 -College, Vill. gill Kalan, Rampura 2. Electronics & Communication Engineering 12

-Phu. Distt. Bathinda 3. Electrical Engineering 12

4. Mechanical Engineering 12

5. Civil Engineering 12

119. Gyan Sagar Poly. Coll. 1. Mechanical Engineering 12 Jai Singh Wala Raod, Bagha 2. Computer Engineering 12

Purana Distt. Moga 3. Electrical Engineering 12

4. Civil Engineering 12

5. Electronics & Communication Engineering 12 120. Baba Hazara Singh Polytechnic 1. Civil Engineering 12 College, near Aujla Bypass 2. Computer Engineering 12 Vill Thanewal P.O. Babahali Dist. 3. Mechanical Engineering 12

Gurdaspur 4. Electrical Engineering 12

5. Marine Engineering 12

121. Guru Gobind Singh Polytechnic 1. Civil Engineering 12 College, Vill. Phohfi Road, 2. Computer Engineering 12 Nathana, Distt. Bathinda 3. Electronics and Comm. Engineering 12

4. Mechanical Engineering 12

5. Electrical Engineering 12

Sr. Name of the Name of the Courses Intake as No. Institution Sanctioned by AICTE

(19)

123. Adarash Polytechnic, College, 1. Computer Science and Engineering 12 Patiala- Samana Road, Vill. 2. Electronics and Comm. Engineering 12 Dhantahal, Distt. Patiala 3. Electrical Engineering 12

4. Civil Engineering 12

5. Mechanical Engineering 12

124. Guru Arjun Dev Polytechnic, 1. Civil Engineering 12 College, Vill. Fateh Nangal, 2. Computer Engineering 12 Tehsil & Distt. Gurdaspur 3. Electrical Engineering 12 4. Electronics and Comm. Engineeirng 12

5. Mechanical Engineering 12

125. Global Polytechnic, College, 1. Civil Engineeirng 12

Chak Ruldu Singh Wala, 2. Computer Engineering 12

Talwandi Sabo 3. Electrical Engineering 12

4. Electronics and comm. Engineering 12

5. Mechanical Engineering 12

126 Guru Gobind Singh Polytech. 1. Civil Engineeirng 12 Coll. Vill Handowal Kalan P.o. 2. Computer Engineering 12 Bassi Kalan, Dist. Hoshiarpur 3. Electronics and comm. Engineering 12

4. Electrical Engineering 12

5. Mechanical Engineering 12

127 Bana Deep Singh Polytechnic 1. Civil Engineeirng 12 College, VPO Panniwala Fatta 2. Electrical Engineering 12 Teh. Malout Distt. Muktsar 3. Electronics and comm. Engineering 12

4. Mechanical Engineering 12

5. Computer Engineering 12

128 Mata Gujri Memorial Polytechnic 1. Civil Engineeirng. 12 College, Vill Balwanda P.O. 2. Mechancial Engineeirng 12 Chack Sharief, Dist. Gurdaspur 3. Electronics & Communication Engineeirng 12 4. Computer Engg. & Application 12

5. Fashion Designing 12

129 Tawi Polytechnic College Dhar 1. Civil Engg. 12

Kalan, Shapur, Gurdaspur 2. Electrical Engg 12

3. Mechanical Engg 12

4. Elec & Comm. Engg 12

5. Computer Engg 12

130 Global College of Engg & Tech 1. Mechanical Engg 12 Kahnpu Khui, Anandpur Sahib 2. Elec & Comm. Engg 12 Garhshankar Road) Teh. Anandpur

Sahib, Distt. Ropar

131 Anand College of Engineering& 1. Mechanical Engineering 12 Management Sultanpur Road, 2. Computer Science & Engg 12 Opp. Rail Coach Factory

Kapurthala

132. Gurukul Vidyapeeth Institute of 1. Civil Engg 12 Engg & Tech, Vill. Ram Nagar 2. Mechanical Engg 12 Teh. Rajpura Dist. Patiala

(20)

133. Ram Devi Jindal Educational 1. Civil Engg 12

Charitable Society Group of 2. Mechanical Engg 12

Institutions Vill. Basoli P.O. Ranimajra-140501, Teh. Derabassi Distt. Mohali

134 Asra College of engg. & Tech. 1. Computer Science & Engg. 12

Patiala Sangrur Highway, 2. Civil Engg 12

NH 64 Vill. Rajpura (Near Channo) 3. Mechanical Engg. 12 Teh. Bhawanigarh Dist. Sangrur

135 North West Institute of technolgy 1. Civil Engineering 12 Vill Dhudike Dist. Moga 2. Computer Science & Engg 12 136 Continental Institute of Engg & 1. Mechanical Engg 12 Tech, Vill. Jalvehra G.T. Roard 2. Elec & Comm. Engg 12 (NH) PO Nabipur, Dist Fatehgarh

Sahib, Punjab

137 GHG College of Pharmacy , 1. Mechanical Engg 12

Opposite Reliance Petrol Pump, Ludhiana Raod, Gondwal Raikot, Ludhiana

A. ELIGIBILITY FOR ADMISSION FOR LATERAL ENTRY TO DIPLOMA ENGINEERING COURSES.

I Candidates who have passed 10+2 Science from a board recognized or established by Central /

State Government with Vocational / Technical Subjects OR 10th from a board recognized or established by Central /State Government with 2 years ITI with appropriate specialisation in that order shall be eligible for admission to second year Diploma courses of appropriate program, upto a maximum of 20% of sactioned intake.

II Admission to LEET seats shall be made on the basis of relative merit in the qualifying examination mentioned above.

III It is further provided that seats remaining unfilled on the basis of eligibility criteria mentioned in Para A-1 shall be filled on the basis of inter-se-merit of

i) One year ITI after 10th standard from any institution of Punjab/ Other state.

ii) 10+2 vocational examination in various branches from a board recognized or established by Central / State Government through a legislation.

Sr. Name of the Name of the Courses Intake as No. Institution Sanctioned by AICTE

Morning Evening

iii) 10+2 with science from a board recognizeed or established by Central / State Government through a legislation.

iv) Two years certificate course from Sant Longowal Institute of Engineering and Technology, Longowal and have Punjab Domilcile

IV From the Academic session 2013-14, 85% seats shall be reserved for the internal candidates from the State of Punjab and 15% shall be open to the candidates from outside Punjab on All-India basis. V The Eligibility criteria for 85% seats will be that the candidate shall be a resident of Punjab State as per Punjab Government, Department of Personnel and Administrative Reforms (PP-II Branch) letter No. 1/3/ 95-3PPII/9619 dated 6th June 1996 and letter No. 1/3/ 95-3PP-II/81 dated 1st January, 1999 and should have passed the examination mentioned at Para I and III, from an institution / school afiliated to Punjab School Education Board / CBSE/ICSE/National Open School situated in Punjab. The candidate would be required to submit a certificate to this effect from the principal/Head of Institution last attended in the prescibed proforma as given in the prospectus.

(21)

Technical Education and Industrial Training Memo. No. 35/44/95-1T(2)/978 dated 21st March, 2003, which is attached as Annexure-I.

VII The State Board of Technical Education and Industrial Training Punjab shall formulate a scheme for making admissions.

VIIIAdmission of candidates, who fulfil all other conditions, shall be made on the basis of relative merit in qualifying examination subject to reservation of seats, detailed instructions in respect of which are given in section C. IX The students shall pay the fees, development fee and other charges as fixed by Government of Punjab / UT of Chandigarh or the Board.

X The fee structure for Foreign Nationals / Persons of Indian Origin shall be the same as is in vogue for NRI candidates.

XI The guidelines for admission of Kashmiri migrants shall be as per Punjab Government Notification No. 35/ 44/95-ITE2/3244 dated Chandigarh the 30th August 2001.

XII The guidelines for admission of Foreign Nationals/ Persons of Indian Origin shall be as per Punjab Government Notification No. 13/75/2001-ITE2/296 dated Chandigarh the 23rd Janrary, 2002

XIIIThe management quota shall be as per Punjab Govt. Department of Technical Education and Industrial Training Memo no. 13/129/2003-1TE2/1247 dated 25th April 2008 and no. 13/129/2003-1TE2/1892 dated 20th June 2008 as amended from time to time .

XIVThere shall be no bifurcation of the seats into "free seats" and "paid seats". This is in compliance with the judgement of the Hon'ble Supreme Cout of India vide its Judgement the case of T.M.A Pai Foundation and other Vs. State of Karnataka and other ((2002) 8 SCC 481: AIR 2003SC 355). and the instructions of Government of India, Ministry of Human Resource Development and the AICTE.

courses shall be conducted through web based online counselling for the Academic year 2013-14 and therefore physical presence of candidates for the counselling will not be necessary.

II During the online counselling, candidate shall be given opportunity to exercise choice of institutes/ trade in three rounds and thereafter the vacant seats, if any, shall be filled by the institute on the criteria of admissions under management quota.

III The Board shall giv e a public notice in leading newspapers regarding the schedule of counselling. IV While fixing the date of counselling for admission, the

Board shall keep inview the cut off date and schedule for approval by All India Council of Technical Education and Pharmacy Council of India for the academic session 2013-14.

C. RESERVATION

I The reservation of seats shall be as per the Punjab Government, Department of Technical Education & Industrial Training, Memo No. 35/44/95-1T(2)/975-77 dated 20th March 2003 which is attached as Annexure-II. As regards the reservation of seats of Chandigarh Polytechnics, the same shall be as per the policy intimated by the Chandigarh Administration to the Board.

II The attention of the applicants desirous of claiming reservation under any category is drawn to the condition and stipulation that only the certificates that have been issued on or before the last date of counselling shall be accepted. The candidates are accordingly advised, in their own interest, to get the requisite certificates issued well before the cut-off date, otherwise their cetificates shall not be considered and their claim for reservation shall be summarily rejected. No extension shall be granted in this regard, under any circumstances. This provision should be given wide publicity and also included conspicuously in the prospectus-cum-information brochure to be issued by the Board. III The Board shall make a provision for the candidates to

(22)

in online counseling. The Government of Punjab may also set up a Committee to effect inter se gradation of cadidates claiming reservation under certain categories, as indicated in the aforesaid memo dated 20th Match, 2003. In the absence of this Committee, the Board shall effect this inter se gradation, in accordance with the criteria laid down in the aforesaid memo dated 20th March, 2003.

IV A candidate shall be eligible to make claim for reservation under one reserved category only. However, the procedure for counseling / allotment of courses and / or institutes shall be such that if a candidate is getting a course/ institution higher in his/ her order of preference, as a general candidate,he/she shall be so regarded, not withstanding his/her claim as a reserved category candidate. The seat under the reserved category shall then be offered to the candidate in that very reserved category.

V The unfilled seats in any reserved category shall be merged in the General Category after all eligible candidates of the reserved categories have been given reasonable opportunity of making a choice.

D. ADMISSION SCHEDULED

As per AICTE's notification No. Advt. No. Legal/12 (06) 2012 the admission shall not be made aafter 15th August 2013.

E. OVER-RIDING PROVISION

I Nothing in this notification shall be operative in so far as it is inconsistent with the law of the land as laid down of the judgement of the Honourable Supreme Court of India in the case of T.M.A. Pai Foundation and others Vs. State of Karnataka and others [(2002) 8 SCC 481:AIR 2003 SC 355]. Any such inconsistency may be brought to the notice of the Government of Punjab, clearly highlighting the inconsistency, for immediate rectification.

II The institutions which do not make admission on the basis of the Admission procedure as notified by the Board, from time to time or violate any of the above terms and conditions, shall automatically stand disaffiliated from the Board without any further notice. III The notifications/ circulars/instructions of Government

of Punjab referred to in A-III,A-IV,A-IX,A-X,A-XI C-I of this notification shall be treated as part of this notification for all purposes and all the provisions of this notification shall be read along with the contents of said notification/ circulars and instructions.

A.R.Talwar, IAS

Principal Secretary to Govt. of Punjab Department of Technical Education and Industrial Training, Punjab, Chandigarh.

(23)

Memo No.35/44/95-IT(2)/978 Dated:Chandigarh, the 21st March 2003.

Subject: General Eligibility Criteria for admission to Professional/ Diploma/ Degree/ Post Graduate Degree level Engineering/ Technical/ Pharmacy and Architecture Courses for session 2003-2004.

Reference on the subject noted above.

2. In supersession of this department memo No. 35/44/95-IT(2)/738, dated: 4th March 2003, the following shall be the eligibility criteria for admission to Professional/ Diploma/ Degree/ Post Graduate level Engineering/ Technical / Pharmacy and Architecture courses in Punjab State for session

2003-2004:-i) 85% seats will be reserved for the candidates from within the State and 15% will be open to candidates on All India basis. The eligibility criteria for 85% seats will be that the candidate must be resident of Punjab State in terms of Punjab Government, Department of Personnel and Administrative Reforms (PP-I Br.)letter No. 1/3/95-3PP1/9619, dated the 6th June, 1996 and letter No. 1/3/95-PP-II/81, dated the Ist January,1999 and should have passed qualifying examination from any recognized Board/ University.

In case, the residence certificate is found at any stage to be false or incorrect, the admission against Punjab quota shall be liable to be cancelled, without prejudice to any criminal proceedings that may be initiated. Furthermore, the fees or any other amount paid, including advance or security, shall be automatically treated as forfeited.

ii) The above condition regarding a candidate being resident of Punjab shall not be applicable to the following categories of

candidates:-a. Candidates seeking admission under NRI quota, if eventually permitted:

b. Children, wards and dependents of Punjab Government employees and employees of Boards/ Corporations/ Statutory Bodies/ Companies/ Co-operative Societies set up or owned or controlled by the Punjab Government, including those established by or under an Act of the State of Punjab or a Central Act, by the Punjab Government, posted within or outside the state of Punjab.

c. Children, wards and dependents of members of All India Services borne on Punjab Cadre, irrespective of where the officer is posted. This shall also include children, wards and dependents of members of All India Services borne on cadres other than that of Punjab, provided the said officer is on deputation with Punjab Government or any of its Boards, corporations, statutory bodies, companies, co-operative Societies enumerated in sub-para (b) above, irrespective his place of posting.

d. Children, wards and dependents of the Central Government employees who have served for at least two years in connection with the affairs of the Punjab Government or any of its Boards, Corporations, Statutory Bodies, Companies, Co-operative Societies enumerated in su-para (b) above out of 5 years proceeding the year of entrance examination;

e. Children, wards and dependents of those Punjab Government pensioners settled outside Punjab.

f. Children, wards and dependents of military/para-military forces personnel belonging to the State of Punjab as per record at the time of their entry in service (A certificate on prescribed proforma by the Commanding officers of the Unit has to be furnished): and

g. Children, wards and dependents of the ex-employees of military/para military forces personnel belonging to the State of Punjab as per record at the time of their entry into service.

iii) A candidate must have appeared in the Common Entrance Test (CET) conducted by the Punjab Technical University for admission of graduate courses and Joint Entrance Test (JET) conducted by the Punjab State Board of Technical Education.

iv) The guidelines issued for the grant of residence certificates/ bonafide resident of Punjab by the Department of Personnel and Administrative Reforms (PP-2 Br.) vide No. 1/3/95-3P-2/9619, dated the 6th June, 1996 and I.D. No. 1/2/96-3PP-2/8976, dated 7th July, 1998 and No. 1/3/95-3PP-2/80, dated 1st January, 1999 and further instructions, issued by that Department, if any, will be adhered to in letter and spirit while making admission to the degree/ Technological courses in the Engineering Colleges and in the University etc.

v) NRI seats were being previously filled as per guidelines issued by AICTE vide No. F 38-7/Legal/ 2001, dated 03.10.2001. However, the admission to NRI seats, if at all permitted by the Government of India and/ or the AICTE, in light of the interpretation of the judgment of the honorable Supreme Court of India in the case of TMA Pai Foundation and others vs. State of Karnataka and others ((2002) 8 SCC 481: AIR 2003 SC 355), shall only be in accordance with the fresh guidelines to be issued by them, in due course.

(24)

GOVERNMENT OF PUNJAB

Department of Technical Education & Industrial Training, (Technical Education Branch–II )

Memo No. 13/2/05-ITE2/469 Dated: 20th February, 2006. Subject: Reservation of seats for various categories of candidates for admission to the degree-level courses in Engineering and Technology in various Colleges, including MBA, MCA and B. Pharmacy as well as diploma level courses in Polytechnic Institutions and certificate courses in ITI’s in the State of Punjab for the session 2006-07.

Reference Punjab Government Memo No.13/2/05-ITE2/869 dated 4th April, 2005, on the subject noted above. 2. The aforesaid Reservation Policy has been further reviewed and it has been decided to retain the previous policy

in terms of substantive percentages of reservations for various categories. The percentage of reservation for each of the categories shall be now as

under:-i. Scheduled Castes/Schedule Tribes 25%

ii. Backward Classes. 5%

iii. Border Areas/Backward Areas (2% each) 4%

iv. Sportspersons 2%

v. Children/Grand Children of Freedom Fighters. 1%

vi. Disabled Persons: 3%

a. Blind 1%

b. Deaf & Dumb 1%

c. Other Handicapped 1%

(If suitable candidates are available in anyone of these sub-categories, the seats so available will be filled up by the candidates from the other sub categories of disabled candidates and if they are not available in any subcategory then seats shall be filled up from general category candidates.)

3. Children/widows of defence personnel killed or disabled to the extent of 50% or more in (2%)

action, wards of gallantry awardees, children of serving defence personnel/ex-servicemen. The priority to this category is given as under

:-a) Killed in action

b) Disabled in action and Boarded out of service.

c) Died while in service and death attributable to military service

d) Disabled in service and Boarded out of service with disability attributable to military service. e) Gallantry award/other award winnders both serving/retired.

f) Serving Defence Personnel/Ex-servicemen

4. Children/widows of Para-military forces personnel, Punjab Police, PAP and Punjab Home (2%)

Guards killed or disabled in action to the extent of 50% or more; and children of paramilitary forces personnel/ex-paramilitary forces personnel, wards of Punjab Policemen decorated with Gallantry Medals

5. November 1984 riots-affected displaced persons, children of the Army deserters Killed/100% (2%)

physically disabled, children of the families of persons killed as a result of terrorist violence or by security forces acting in aid of civil authorities and the children of innocent civilians who have sustained 100% disability in terrorist violence or during operation by Security forces acting in aid of civil authorities

6. The reservation for T-Sunami affected person shall be available for children/grand children (1%)

of Original Ex-serviceman settlers of Campbell bay Island only.

7. The aforesaid percentage reservation in respect of each category shall, however, be subject to the detailed clarifications and inter se gradation criteria as decided in the meeting chaired by Chief Secretary to the Government of Punjab on 13th March 2003, the minutes of which are appended. These minutes and the decisions recorded therein shall be treated as a part and parcel of this communication.

8. Nothing in the aforesaid policy shall apply to the courses run by the three universities in the state, other than Punjab Technical University, Jalandhar, in respect of the courses offered by them in their campuses or their regional centres. Admission to these courses shall be governed by the reservation policy framed by the respective University.

9. These policy instructions shall be subject to the law laid down by the honorable Supreme Court of India in the case of T.M.A. Pai Foundation and others vs. State of Karnataka and others ((2002) 8 SCC 481: AIR 2003 SC 355).

10. You are requested to implement the above reservation policy in all the Professional/Engineering Colleges/ Polytechnic Institutions/Industrial Training Institutes and Technical Institutes in the State.

(25)

Secretary to Government, Shri Y.S.Ratra, in his office room, on 13th March, 2003, at 3.30 P.M.

The list of the officers who attended the meeting, is given in Annexure “A”.

could be given to a person with higher percentage disability. She explained that a person was certified to be handicapped, provided his disability was 40% or more. As such, she proposed that all the handicapped persons having disability of 40% or more, in the respective sub-category (i.e. blind, deaf and dumb etc.,), should be regarded as at par and their inter se gradation should be effected in accordance with the rank in the entrance examination.

The proposal of the Principal Secretary Social Security was agreed and approved unanimously.

3. Children / Widows of Defence Personnel / Ex-Servicemen etc.:

This matter was discussed threadbare. It was felt that the children, wards and winners of gallantry awards should be given over-riding preference over children/ widows of the ordinary Defence Personnel/Ex-Servicemen. It was also felt that the children/wards of the posthumous awardees of the particular award should get precedence over other awardees of the same category.

It was, accordingly, decided that in this category of reservation of 2%, the following would be the priority, each higher sub-category being preferred to the exclusion of the lower ones

:-1) Gallantry awards winners in the following order : Param Vir Chakra (PVC), Ashok Chakra (AC), Sarvottam Yudh Seva Medal (SYSM), Maha Vir Chakra (MVC), Kirti Chakra (KC), Uttam Yudh Seva Medal (UYSM), Vir Chakra (VrC), Shaurya Chakra (SC), Yudh Seva Medal (YSM), Sena/ Nau Sena/Vayu Sena Medal (gallantry only), Mention-in Despatches.

2) For the same medal/awards the children/wards of the posthumous awardees, would get preference as compared to those of other awardees of the same category.

3) Children/wards of defence personnel killed or disabled to the extent of 50% or more “in action”, including cases of Home Guards.

4) Thereafter, children/widows of Serving Defence Personnel/Ex-Servicemen would be considered. However, the children/widows of personnel getting distinguished service awards such as PVSM, AVSM, VSM and Sena Medal/ Nau Sena Medal and Vayu Sena Medal (distinguished service) would get over-riding priority in this sub-category, in the said order. Here also, the children/wards of the posthumous awardees would get preference over the children/wards of the normal awardees of the same category.

5) If there is more than one claimant within the same category/sub category as enumerated above, the tie is then to be broken with the assistance of the rank/marks in the entrance test.

At the outset, Secretary Technical Education introduced the subject of the meeting. He apprised that the Department of Technical Education and Industrial Training had been issuing guidelines from year to year for giving effect to the Punjab Government’s policy regarding reservation of seats in the aforesaid institutions, for candidates belonging to various categories. These instructions were based on the policy instructions received from various other Administrative Departments, dealing with such specific categories. The necessary communication pertaining to the previous year i.e. Current Academic Session 2002-2003) had been issued vide communication No. 35/44/95-1TE2/1824, dated 21.05.2002

(annexed to the agenda note).

2. The Department had been facing practical difficulties and interpretational problems at the time of counselling and admission. These had accordingly been summarized in the detailed agenda note.

3. The Secretary Technical Education made it clear that there was no proposal to change percentage already earmarked for various categories, or to add or delete any category, but only to issue clarifications and also take decision regarding the internal gradation, if any, within a specific category.

4. Thereafter, each item was discussed ad seriatum and the following decisions were taken

:-1. Sports Persons :

Joint Secretary Sports apprised that the Sports Department had already adopted a comprehensive policy regarding gradation of sports certificates. He clarified that the objective was to give preference to “A” category over “B” category, even if the marks obtained by the “A” category sportsmen was lower than those of “B” category sportsmen. He stated that if this were not done, the very objective of gradation would be defeated, and international level sportspersons would be clubbed with those who had represented only at the district level. He also clarified that even within the same category of sports certificates, preference had to be given to winners and runners up etc., and the policy instructions were comprehensive code in this regard. Only when the tie was not broken on the basis of these comprehensive sports gradation guidelines, the University/Colleges take recourse to the marks/rank in the entrance exam to break the tie.

The policy of the Sports Department which already has the approval of the Government, was found to be fair just and reasonable and it was, accordingly, decided that action may be taken exactly in accordance with the Punjab Government, Department of Sports and Youth Services, letter No. 47/26/83-5Edu/2036, dated 10th December, 1997. It was also decided that a copy of these instructions may be appended to and circulated along with the minutes of this meeting.

2. Disabled Persons :

The Principal Secretary Social Security explained that unlike in case sportspersons, no preferential treatment

References

Related documents

The study results highlight the profound impact of the introduction of HAART on the cohort of AIDS patients studied with a sig- nificant decrease in mortality rates and increase

Director of Technical Education has prescribed the syllabus for the Advanced Diploma in Industrial Safety and the Maharashtra State Board of Technical Education hold the

In an attempt to resolve the ―individualism-collectivism controversy‖ in terms of its relationship with innovation, we relate to the distinction between

The steering priority valves block hydraulic flow to the four inner functions when load sense pressure at the steering side is lower than load sense pressure at the inner sections..

To restore an Image to a Virtual Machine (VM) you will need either the Professional or Server editions of Macrium Reflect as you will need to use ReDeploy.. Use the following steps

As well as tabulat- ing specific heats at constant pressure and constant volume, specific heats are given as heat capacity per unit mass, heat capacity per mole, or heat capacity

The particular shape of the seabed profile found by the genetic algorithm allows incident wave to reach the critical depth (and consequently to initiate the wave breaking as

She earned a place on the Dean’s List after her first semester and was selected to be part of the College of Nursing Robert Wood Johnson Scholars Program and the Hispanic