• No results found

Distillation.pptx

N/A
N/A
Protected

Academic year: 2021

Share "Distillation.pptx"

Copied!
40
0
0

Loading.... (view fulltext now)

Full text

(1)

SINGLE STAGE

SINGLE STAGE

DISTILLATION

DISTILLATION

CHE134P/CPMONTEROLA CHE134P/CPMONTEROLA

(2)

TYPES OF DISTILLATION

TYPES OF DISTILLATION

1. simple

1. simple

batch/differential distillation

batch/differential distillation

2. Flash Distillation

2. Flash Distillation

3. simple continuous

3. simple continuous

4. steam distillation

4. steam distillation

(3)

TYPES OF DISTILLATION

TYPES OF DISTILLATION

1. simple

1. simple

batch/differential distillation

batch/differential distillation

2. Flash Distillation

2. Flash Distillation

3. simple continuous

3. simple continuous

4. steam distillation

4. steam distillation

(4)

SIMPLE BATCH OR

SIMPLE BATCH OR

DIFFERENTIAL DISTILLATION

(5)

RAYLEIGH EQUATION

RAYLEIGH EQUATION















=

=

α

α

AB

AB

ln

ln

 (1−)

 (1−)

(1−)

(1−)

F is the Feed F is the Feed  x

 xFF is the concentration of more volatile component in is the concentration of more volatile component in the feedthe feed

W is the Residue

W is the Residue

 x

 xWW is the is the concentration of the more volatile component in the residueconcentration of the more volatile component in the residue

α

(6)

SAMPLE PROBLEM 1

A solution containing 35% by weight toluene and 65% by weight benzene is subjected to a simple batch distillation at atmospheric pressure. For this

purpose, assume relative volatility is equal to 3. If the distillation is discontinued when the weight of the

distillate amounts to 45% of the charge, calculate the amount of benzene in the distillate as %

benzene in the charge.

(7)

SAMPLE PROBLEM 2

A 537 kg solution containing 50% by weight heptane and 50% by weight octane is batch distilled until only 4.74 lbmoles remain in the pot. If the relative volatility of the mixture is 2.0, what will be the distillate

composition in terms of mole fraction heptane? A. 0.5327 B. 0.4673 C. 0.3889 D. 0.6398

(8)

SAMPLE PROBLEM 3

A 100 kgmol liquid mixture containing 45% A and

55% B by mole is differentially distilled until 40 kgmole of A is vaporized. If the relative volatility of A with

respect to B is equal to 1, what is the mole fraction of A in the remaining liquid?

(9)

EXERCISE 1

A batch differential distillation is made upon a 25 kg mixture of ethanol-water containing 7% weight

alcohol. How many kg of distillate must be collected so that it will have an ethanol content of 30%

weight? Assume that the relative volatility of the mixture to be equal to 12.

(10)

EXERCISE 2

500 moles of a liquid mixture are charged to a

distillation unit. This liquid mixture contains 0.25 mole fraction of component A and 0.75 mole fraction of component B. If the mixture is subjected to a simple batch distillation, what will be the liquid/residue

composition after 100 moles of component A has

been removed with the vapors? Assume the relative volatility of component a with respect to B is 3.15.

(11)

EXERCISE 3

A mixture containing 0.65 mole fraction A and 0.35 mole fraction B is subjected to a simple batch

distillation until the instantaneous composition of the vapors leaving becomes 0.55 mole fraction A. If the relative volatility for the mixture is constant at 2.5, estimate the average composition of the total distillate collected. A is more volatile than B. A. 0.65 B. 0.74 C. 0.81 D. 0.93

(12)

SAMPLE PROBLEM

The temperature of a simple batch

distillation is maintain at 90°C, the vapor

pressure of pure methylbenzene is 53.3 kPa

and that of pure 1,2-dimethylbenzene is 20

kPa. What is the composition of the bottoms

when the pressure is 0.5 atm? What is the

(13)

SIMPLE CONTINUOUS

DISTILLATION

(14)

SIMPLE CONTINUOUS

DISTILLATION

Relative volatility ,α

(15)

MRII PROBLEM

One hundred moles per hour of solution

containing 80 moles of A, the rest is B

subjected to simple continuous distillation.

The distillate contains 72 moles of A. If A is 5

times more volatile than B, concentration

of A in the distillate is_____.

A. 0.85

b. 0.80

c. 0.533 d. none of

these

(16)
(17)
(18)

SAMPLE PROBLEM 1

If naphthalene were to be steam distilled at 200°C and 1 atm, how many moles of steam would be needed per mole of naphthalene? Assume the

vapor pressure of naphthalene at 200°C to be equal to 475 mm Hg.

A. 0.0844 B. 0.60 C. 0.80 D. 0.4482

(19)

SAMPLE PROBLEM 2

Glycerin is steam distilled at 190°C under 26-in vacuum. A test shows a steam consumption of 1.0 pound per pound of glycerin distilled. What percent excess steam , referred to that theoretically needed, is actually used? Vapor

pressure of glycerin at 190°C is 29 mm Hg. A. 110

B. 100 C. 85 D. 170

(20)

SAMPLE PROBLEM 3

A totally immiscible liquid system composed of water and an organic liquid boils at 90°C when the barometer reads 734 mm Hg. The distillate contains 73% by weight of the organic liquid. What is the molecular weight of the

organic liquid? A. 112

B. 123 C. 132 D. 100

(21)

SAMPLE PROBLEM 4

If steam is blown into the still containing a mixture of water and chlorobenzene and the total pressure is 130 mm Hg. Estimate the temperature of boiling and the composition of the distillate. The two components are immiscible in the liquid. Vapor pressures of

chlorobenzene and water are given below:

Pressure, mm Hg 100 50 30 26 Temperature °C, Chlorobenzene 70.4 53.7 42.7 34.5 Temperature °C, Water  51.7 38.5 29.9 22.5

(22)

EXERCISE 1

Calculate the weight of water required to

steam distill 500 mg of bromobenzene at

95C. The vapor pressure of water at this

temperature is 640 Torr, bromobenzene, 120

Torr. Bromine is 79.9.

(23)

EXERCISE 2

A mixture contains 100 kg of water and 100 kg of ethylaniline ( mol wt. = 121.1kg/kg mol), which is

immiscible with water. To purify ethylaniline, it is steam distilled by bubbling saturated steam into the mixture at a total pressure of 101.32 kPa. Determine the boiling point of the mixture and the composition of the vapor. The

vapor pressure of each of the pure compounds is as follows: K °C Pwater (kPa) Pethylanilin e(kPa) 353.8 80.6 48.5 1.33 369.2 96.0 87.7 2.67 372.3 99.15 98.3 3.04

(24)

RAYLEIGH EQUATION 2

ln

=



−

(25)

SAMPLE PROBLEM:

RAYLEIGH EQUATION

DIFFERENTIAL DISTILLATION

A mixture of 100 mol containing 50 mol% n-pentane and 50 mol% n-heptane is distilled under differential conditions at 101.3 kPa until 40 mol is distilled. What is the average composition of the total vapor distilled and the composition of the liquid left? The

equilibrium data are as follows, where x and y are mole fractions of n-pentane:

X Y X Y X Y

1.0 1.0 0.398 0.836 0.059 0.271 0.867 0.984 0.254 0.701 0 0

(26)

11.3-2 GEANKOPLIS

EXERCISE 3

A mixture containing 70 mol% benzene and 30 mol%

toluene is distilled under differential conditions at 101.32 kPa. A total of one-third of the moles in the feed is

vaporized. Calculate the average composition of the

distillate and the composition of the remaining liquid. Use the data below:

X Y X Y X Y

1.0 1.00 0.411 0.632 0 0 0.780 0.9 0.258 0.456

(27)

OLD BOARD PROBLEM

• A solvent-

water mixture is to be distilled at 95˚C.

The vapor pressure of the solvent at this

temperature is 130 mmHg and that of water is 640 mmHg. The solvent is immiscible in water and has a molecular weight of 150. The weight of the solvent in kg that will be carried over in the distillate with 200 kg of water is

(28)
(29)
(30)

RECTIFYING SECTION

(31)

LIQUID-VAPOR

EQUILIBRIUM CURVE

(32)

RECTIFYING SECTION

MCCABE-THIELE METHOD

Slope = L/V

Yint = DXd/V

(33)
(34)

REFLUX RATIO, R

PERRY PAGE 13-19

(35)

STRIPPING SECTION

(36)

STRIPPING SECTION

(MCCABE-THIELE METHOD)

Slope = L’ /V’

(37)
(38)
(39)
(40)

FEED SECTION

References

Related documents

Namun, penelitian ini tidak sejalan dengan penelitian yang dilakukan Irfana (2011) yang menyatakan bahwa status debt default berpengaruh negatif terhadap penerimaan

In this framework, four broad phases are performed namely: UML Modeling of Service Composition, Transforming of WSDL of discovered Web Services into UML Class Diagram, Refining UML

12(b) shows the phase variation of the displacement across the B-mode image where the color bar indicates the shift in radians.. 13(a) shows the total movement at all

If the controller is initialized, using the Initialize command in the Controller menu, all I/O database registers used for Element Configuration are set to zero.. The

I don’t wanna close my eyes / I can’t tell if I’m asleep or if I’m blind We’re going nowhere / No one seems to care. I could sell a peace of mind / I could tell you every time

The proposal for the Service to stay independent but work closel y with other local authorities was preferred by 71%, with 15% preferring a merger of the Service and

The objective of this study is to examine the study habits of undergraduate students in Xavier University, looking at duration, place of study, materials used for study, and their

Tectonic configuration of SE Asia showing Indonesian region is complex Tectonic configuration of SE Asia showing Indonesian region is complex.. because it lies at the triple