Introduction Controller Spares... 3 CF-Cards... 4 Controller PCBs... 5 Controller PSUs... 7 Controller PSUs... 8 Controller PSUs...

(1)

(2)

(3)

D-Series Spares Catalogue - Contents

EPT007220 Issue 10, November 2018

Introduction

This document provides useful information about the current D-Series i-Tech ancillaries and spare parts including photography, part numbers and description of how to use the parts.

Note: This is a working document and will be continuously updated, the newest version of this document will always be available on MyDomino.

Stock Class: Customer and Service Engineer unless otherwise stated.

Should you have any questions relating to this Ancillaries & Spares Information please do not hesitate to contact the Product Management Team – Laser:

[email protected]

Technical Product Management – Laser

(5)

D-Series Spares Catalogue - Controller Spares

EPT007220 Issue 10, November 2018 3

Controller Spares

Image Description Quantity

per kit L015179

Controller D320i (BCP7) Details: Controller for D120i and D320i with ETX BaseBoard 2.0 MSC-SBC

Laser: Backward compatible to D100+ and D300+

1

L015180

Controller D320i IP55 (BCP7) Details: Controller for D120i and D320i with ETX BaseBoard 2.0 MSC-SBC

Laser: Backward compatible to D100+ and D300+

1

L015133

Controller D620i (BCP7) BB2.0 Details: Controller for D620i with ETX BaseBoard 2.0 MSC- SBC

Laser: Backward compatible to D550+

1

L015134

Controller D620i IP55 (BCP7) BB2.0

Details: Controller for D620i with ETX BaseBoard 2.0 MSC- SBC

Laser: Backward compatible to D550+

1

(6)

CF-Cards

per kit Spare CF-Card Controller

with Image

EPT049047SP - QuickStep2 Installed on latest machines.

Hardware requirements: DIB 1.53 or later / ETX BB 2.0 or later

Version: QS 2.4.52 / 4.1.0.18 EPT039842SP - QuickStep2 Previous standard image.

Version: QS 2.4.50 / 4.1.0.14 L015372 – Dynamark 3.8 Needed for existing solution systems with special software installed. Hardware

requirements: DIB 1.53 or later / ETX BB 2.0 or later

Details: 1GB Compact Flash card containing all programs and setup information to run the BCP7 controller.

1

(7)

Controller PCBs

per kit EPT033681

ETX MODULE 2.00 WITH MINI PCI CONNECTOR SP Details: Single Board Computer module responsible for running the Operation System; used for non-real time print controlling, print data preparation, managing of variable data functions, external communication and data storage.

Kit contains the CF Card (EPT049047SP)

Note: This new ETX Exchange module contains the newer SBC.

It may be used to replace the previous version of the ETX Baseboard module, but Software version has to be at least

DI140918 (Dyn 3.7.0.27) or later. Previous versions of Dynamark are not supported by this ETX Baseboard.

This kit comes with CF card installed.

For a validated BCP7 controller or in case of any solution software installed, where the older ETX Baseboard is installed, the part L015352 has to be ordered (replacement PN for the old L015144). It contains the CF-card L015325 (Dyn 3.7.0.27).

Stock Class:

Service Engineer Only

1

(8)

per kit L014949

PCB D-Interface DIB 1.53 BCP7 Front Details: The front of the D-Series Interface Board offers all external interface connectors to harness the accessories, interface cables and the remote panel.

Back Details: The back of the D-Series Interface Board shows the connectors and electrical components for interfacing of the ETX base board, power supplies, laser/scanner cable, E- Stop relay and optional boards.

The board works as central point for the internal cable wiring.

Stock Class:

1

L014950

PCB D-Power Extension PEB 1.3 BCP7

Front Details: The PEB board controls the 55W / 60W power supply box. It carries the

interface connectors, the control logic and works as central point for the cable wiring. The front shows the sockets to connect the core controller.

Back Details: The back of the PEB shows the interface

components, the logic IC and the connectors for internal cables.

Stock Class:

1

(9)

per kit L015196

User Port Kit

Details: This kit contains all needed parts in case the installed User Port needs to be replaced.

Stock Class:

1

EPT034396 – Ethernet/IP KIT SP

Details: Spare kit consisting of:

Interface module Cables

Caps

Service Manual Stock Class:

Service Engineer Only

1 2 1 1

L015127

SP Dongle D+ Pharma Option Details: Spare Pharma dongle.

Stock Class:

1

Controller PSUs

per kit L014930

PSU Kit PC/Scan Head BCP7 Power Data:

+5V DC +/-15V DC

+24V DC Stock Class:

1

(10)

per kit L014941

PSU Kit Laser D300+ BCP7 (Used with D320i BCP7 Controller)

Power Data: +30V DC Stock Class:

1

L014209

PSU Meanwell 600 24V used with D620i BCP7

Controller, 2x placed into the Power Extension Box

Power Data: +24V DC (adjusted to 25,25V) Stock Class:

1

Controller PSUs

per kit L014953

Controller Fuse Kit BCP7 Controller AC Mains (12.5A) Lase PSU (10A)

Stock Class:

4 2

L014954

Extension Fuse Kit BCP7 Extension Box AC Mains (20A) Stock Class:

4

(11)

per kit L015228

Laser Power Contactors (Extension Box) 60w

Details: The contactors are used for switching on the laser power supply (surge

Protection).

Stock Class:

1

L015075

Safety Relay Kit BCP7 Safety Relay Pilz PNOZ S4 Fuse

Cables

Note: The cables are already connected to the safety relay.

Stock Class:

1 1 2

L014896 E-Stop Kit BCP7

L014176 – Set of Two Keys Details: Key switch actuator with contact set.

Stock Class:

1

L014952

Key Switch Kit BCP7 L014176 – Set of Two Keys Details: Key switch actuator with contact set.

Stock Class:

1

(12)

per kit L014951

Push Button Kit BCP7

Details: Push button actuator with contact and Label.

Stock Class:

1

L014176 – Key, Set of 2 Details: Spare Keys for BCP7 controller.

1 Set

Controller PSUs

per kit L014870

Filter Pads

Details: Filter pads for BCP7 controller.

5

EPT041291SP

BCP7 FILTER PADS/SET KIT IP55 SPARE

Details: The filter mats are intended for use as a

replacement for the originally installed filters at the inlet of the BCP7 IP55 controller housing.

1

(13)

per kit L015369

BCP7 Inlet Fans

Details: Fan with cable

connected and 2-pin connector.

Stock Class:

1

EPP001462 Fan Inlet IP55 BCP7 Details: The two fans are mounted to the filter. A cable tie and glue pad for cable ties are added.

Stock Class:

1

(14)

Laser Head Spares

Laser Tube Assembly

Image Description Used On

Laser Tube Assembly Kit Details: The laser assembly kit consists of a laser source, mounted on base plate with a telescope.

L015012 - D120i L015014 - D120i BLUE L015011 - D320i L015013 - D320i BLUE

i-Tech 8 Scan

Head L015302 - D120i

L015303 - D120i BLUE L015221 - D320i L015222 - D320i BLUE L015223 - D320i RED L015137 - D620i L015138 - D620i IP65

Head

L015260 - D120i L015261 - D120i BLUE L015262 - D320i L015263 - D320i BLUE L015264 - D320i RED L015265 - D620i L015266 - D620i IP65 L015371 - D620i BLUE

Head

(15)

D-Series Spares Catalogue - Laser Head Spares

Telescopes

Telescope D120i, D320i & D620i L015017 – 1:2,1 L015018 – 1:2,2 Blue L015304 – 1:2,5 L015305 – 1:2,5 Blue L015019 – 1:2,7 L015020 – 1:2.7 Blue L015226 – 1:3,0 L015227 – 1:3,0 Blue L015141 – 1:3,7 L015283 – 1:3,7 Blue L015267 – 1:5,0 L015268 – 1:5,0 Blue L015269 – 1:6,0 L015270 – 1:6,0 Blue

Laser Module

D120i 8 D120i 8 Blue

D120i 10 D120i 10 Blue

D320i 8 D320i 8 Blue

D320i 10 D320i 10 Blue D120i 15, D620i 10

D120i 15 Blue D320i 15 D320i 15 Blue

D620i 15 D620i Blue

per kit

Lens Cleaning Tools EPT033842 - LENS

CLEANING COTTON BALLS EPT033843 - LENS

CLEANING COTTON SWABS L105015 - Lens Cleaning Cloths

50 100

10

L007761 – CO2 LASER SAFETY GOGGLES

Details: Meeting requirements of EN207 – Scale Number LB3

1

(16)

Lenses

Image Description

Spare Lens for D120i, D320i & D620i Available lenses for i-Tech 8/10 scanner only (Diameter 42,9mm):

L015021 - Lens Assy GE F 80mm

(Up to 58x58mm marking field) L015022 - Lens Assy GE F 100mm

(Up to 68x68mm marking field) L015023 - Lens Assy ZNSE F 120mm

(Up to 180x180mm marking field) L015195 - Lens Cap D-Series i-Tech8/10 Note: GE Lens cannot be used with aiming beam.

Available lenses for i-Tech 15 scanner only (Diameter 68mm):

L015370 - Lens Assy ZNSE F 200mm

(Up to 356x452mm marking field) L015278 - Lens Cap D-Series i-Tech15

(17)

Scanner

per kit L015015

Scan Head i-Tech (8mm)

Details: i-Tech 8mm Scan Head includes labels.

1

L015139

Scan Head i-Tech (10mm) Details: i-Tech 10mm Scan Head includes labels.

Stock Class:

1

L015271

Scan Head i-Tech (15mm) Details: i-Tech 15mm Scan Head includes labels.

Stock Class:

1

(18)

Scan Head Mounts

Each Scan Head Mount is supplied with the needed

screws and sealings

Scan Head Mounts

Details: Each Scan Head Mount is supplied with a set of screws and sealing rings. In the case of L015030/ L015280 also the Pilot Laser is fitted.

L015029 – i-Tech Long L015030 – i-Tech Incl. Pilot L015031 – i-Tech Short L015285 – i-Tech Short D620i

i-Tech 8/10 Scan Heads

Only L015175 – BEAM Delivery 180°

Adjust (Beverage)

L015368 – SP BEAM Delivery Expandable

i-Tech 8/10/15

Scan Heads L015279 – i-Tech Long

L015280 – i-Tech incl. Pilot L015281 – i-Tech Short

Head Only

Fans

per kit L015035

Fan for Laser Head D120i / D320i

Details: consisting of a fan with cable connected and 2-pin connector.

1

(19)

per kit L015143

Fans Laser Module D620i Details: Fan spare part kit consisting of two fans with cable connected and 2-pin connector.

2

Laser PCB

per kit L015140

PCB Laser Module CLI 1.23 D120i, D320i & D620i Details: The common laser interface board (CLI) contains all specific interfaces to control the laser unit. The CLI - board is used in all models described in the following with the same assembly. Only the configuration is different. Details of the

individual variants see the applicable chapter.

Attached are five jumpers to configure the different types of:

- laser tubes - scanners - cooling type Stock Class:

1

(20)

Silencer

per kit L015037

Silencer Kit D120i / D320i Details: Silencer for the D120i IP & D320i IP Laser head

1

L015157 Silencer D620i

Details: Silencer for the D620i

IP Laser module only 1

L015306

Magnet Valve Kit

Magnet Valve and Cable Tube

L-Tube Connector Y-Tube Connector

Details: Magnet Valve Kit for compressed air cooled Laser Modules D120i / D320i.

Stock Class:

1 4 1 2

(21)

D-Series Spares Catalogue - Ancillaries & Spares

Ancillaries & Spares

Brackets & Mountings

per kit L014978

19” Bracket Cabinet Kit BCP7 Note: A second kit is needed to mount the laser extension box.

Stock Class:

2

L014907

Universal Controller Mount Kit BCP7

Details: Used to mount the standard controller onto a wall, on the top of a DPX fume extraction system or together with the mounting block kit L014864 onto the laser stand D-Series i-Tech L015170.

1

L014864

Mounting Block Kit

Details: Mounting clamps to attach the controller with the universal mount L014907 at the laser stand D-Series i-Tech L015170.

2

Mounting Plates BCP7-IP onto DPX machines

Details: Used to enable BCP7-IP controllers to be placed onto a DPX machine

L015361 - DPX1000/DPX2000 L015362 - DPX500

L015363 - DPX1500

1

(22)

Stands

per kit L015170

Laser Stand D-Series i-Tech Laser stand to mount laser head and controllers with horizontal and vertical adjustments and quick clamps.

Note: For the following additional requirements please contact the

Sales Support team at Domino Laser in Hamburg:

• frequent adjustments of a higher mechanical load

• horizontal support mounts

• extended vertical support mounts

1

L015171

Base Plate Laser D-Series i-Tech Details: For mounting the laser stand D-Series i-Tech onto the floor to give extra stability.

Including:

threaded rod M10 x190 mortar cartridge

1

4 4

L015172

Ring Clamp Laser Stand i-Tech Details: When you can‘t fix the base plate onto the floor by the means of drilling use this ring clamp. This ring clamp mounts the laser stand onto the holding ring of a KRONES labeller to create stability.

1

(23)

per kit L013009

Head Bracket – Pallet Station Details: Use this only for coding at the pallet station for KRONES labellers. To fix the laser head in front of the pallet station/ aggregate.

1

Air Cooling / Filtration

per kit L015062

Air Chiller Kit D120i /D320i Details: Cooling of the D120i / D320i IP65 version is achieved with compressed air to improve the performance. An optional air chiller SMC IDFA8E-23 may be used to reduce compressed air consumption. One air chiller may support up to two lasers.

EC Directive compliant (CE marked)

Regarding an 110V version (UL listed) for the Air Chiller, please get in touch with our DLG Solution Team.

1

(24)

per kit EPP002300

Air Filtration Kit BCP7 Air Filter

Regulator

Coalescing Filter Control Solenoid Cable (5m)

12mm Tubing (12m) Fittings

Details: The Laser Head is equipped with a connection for compressed air for cooling the laser. Operation voltage is 24V which is supplied by the BCP7 controller.

Replacement filters can be ordered under PN: L015174 and should be replaced at least once a year.

Stock Class:

1 1 1 1 1 1

L015288

Scanner Cooling Kit i-Tech 15 Details: In order to ensure reliable operation of the scan head at high temperatures and/or high duty cycles the scan head may need additional cooling.

Note: Further details are available in the product manual.

Consisting of:

Compressed Air Hose Push-in fitting

Non-Return Valve Silencer 1/8´´

Hose Connection Stock Class:

1

0.5m 1 1 2 1

(25)

per kit L015126

Di Compressed Air Hose Kit for IP65 10/30w

16mm Pipe (4M) 6mm Pipe (1.5M) Air Regulator Meter

Note: This kit will be supplied together with the laser head.

Stock Class:

1 1 1

Fume Extraction

per kit L015181

Fume Extraction Nozzle Kit i- Tech10

Details: For mounting the fume extraction hose at the side of the scan head.

Note: For i-Tech15 Scanner the PN SAT124371 can be

ordered.

Stock Class:

1

Fume Extraction Chambers Details: Depending on the Lens installed, the suitable extraction chamber to be selected.

For i-Tech10 Scanner only!

L015356 - for 80mm Lens L015357 - for 100mm Lens L015358 - for 120mm Lens L015359 - for 150mm Lens L015360 - for 200mm Lens

1

(26)

Cables

per kit L014461

Mains Cable BCP7 (4.5m)

Details: The mains cable is used to deliver 110 or 230V. The cable comes without country specific plug with a length of 4.5m.

1

L015032

Di Conduit (4.5m) L015033

Di Conduit (9m)

Details: This cable connects the controller with the laser head. It delivers scanner power, the scanner command and status information, laser power, laser command and status lines.

Stock Class:

1

L015286

BCP7 Power Interconnection 0.5m

Details: Mains interconnection between the D620i controller and the Power Extension Box Stock Class:

1

(27)

L015287

BCP7 Control Interconnection 0.5m

Details: Control

Interconnection between the D620i controller and the Power Extension Box

Stock Class:

1

per kit L014929

User Port IO Cable X27 (9m) BCP7

Details: This cable allows access to the digital inputs and outputs of the User Port Board.

The User Port is a factory fitted option. This cable is delivered with the factory fitted option.

Stock Class:

1

Ethernet Cable RJ45 – TouchPanel

L014903 (5m Cable) L015118 (10m Cable)

Details: Non-crossed cable for connecting a TouchPanel 1 or 2 with an Ethernet Switch (RJ45 connector).

Note: When using this cable additional Mains cable is needed to supply TouchPanel!

VEY1414 – EU Power Cable VEY1415 – US Power Cable Stock Class:

1 1

1 1

(28)

26 EPT007220 Issue 10, November 2018 L015072

Y-Cable X7, Multi BCP7 Controller to Single DPX Details: This 10m cable is needed when two BCP7 controllers have to be connected to one DPX unit.

Stock Class:

1

Multi-Head

per kit L014900

Multi-Head Cable X58/29 BCP7 Details: The BCP7 controller can be daisy-chained. This cable chains the interlock status, the laser start command and status information to the next

controller in the chain. E.g. for 3 chained controllers 2 of this cables are needed.

Stock Class:

1

L014901

Multi-Head Termination X58 BCP7

Details: This termination connector needs to be plugged into the X58 socket of the last controller in a chain. This part is needed once per chain.

Stock Class:

1

(29)

L014902

Multi-Head Cable X6/X3 BCP7 Details: Cable to connect controllers in a chain. It relays the “print go” and the encoder signals. E.g. for 3 chained controllers 2 of this cables are needed.

Stock Class:

1

(30)

OEM Machine Interface / Interlock Cables

per kit L014980

Machine Interface Cable X4 (9m) BCP7

Details: 9M cable to connect the customer machine interface (for example PCL) with the controller (X4 connector) Stock Class:

1

L014981

Interlock Cable X29 (9m) BCP7 Details: 9m cable to connect the customer machine interface with the controller (X29

connector)

Note: Only the following signals are transmitted: interlock, laser start, print go, printer ready Stock Class:

1

L015158

OEM D-Series Cable Kit (15m) L015224 - Mains power cable L050044 - DPX power cable L015122 - X7 vacuum extension L015121 - X4 machine Interface L015123 - X29 Interlock cable L015225 - X59 Ethernet Details: The OEM cable kit consists of above cables (length 15m each):

1 1 1 1 1 1

(31)

Electrical Accessories

per kit EPT014479

Shaft Encoder Kit IP65

Shaft Encoder with IP65 sealing 10m Cable (Fitted Connector) with Z-Pulse connected Coupling (Paguflex) Mounting Parts

1 1 1

EPP003295

Product Detector (Reflector) Product Detector

Reflector

5m Cable (Fitted Connector) Mounting Parts

Stock Class:

1 1 1

EPP003296

Product Detector (Proximity) Product Detector

Stock Class:

1 1

(32)

per kit EPP003297

Product Detector (Inductive) Product Detector

Stock Class:

1 1

L014934 Beacon BCP7

24V Four Colour Beacon BCP7 5m Cable (Fitted Connector) Stock Class:

1

(33)

per kit L014989

Connector Kit BCP7

Details: Included with every new laser systems delivery.

Kit Components:

Fitting Hose Elbow M5 to 6mm Gasket M5 Fittings

T-nuts

Bulgin PX0733 dust cover Self-adhesive rubber foot 20.6x20.6x7.5mm

D+ felt foot

Protection cap for flange connector IP67

Cap for Chassis bushing IP67 X7 connector – 0322 06 X29 connector – 0322 07 X23 connector – 0322 08-1 X4 connector – 0322 12 X2 connector – 0332 05 X28 connector – 0332 06 X59 connector – 0332 07 X3 / X6 connector – 0332 08-1

Stock Class:

1 1 Set

4 2 8 4 6 1 1 1 1 1 1 1 2

(34)

Ethernet

per kit 83380

Ethernet Switch Hub

Details: Ethernet switch hub connecting multiple controllers to a customer network or one HMI (e.g. TouchPanel).

Stock Class:

1

Ethernet D+ Cabinet - External

L014851 (2m Cable) L014852 (5m Cable) L014853 (10m Cable)

Details: Non-crossed Ethernet cable in 2m, 5m & 10m from the BCP7 controller (Bulgin) to external RJ45. E.g. Switch or customer PC.

Note: A cross over adapter might be required.

1 1 1

Ethernet Cabinet – External L014848 (5m Cable)

L014849 (10m Cable)

Details: Crossed Ethernet cable in 5m & 10m from the BCP7 controller (Bulgin) to the TouchPanel.

Note: When using this cable additional Mains cable is needed to supply TouchPanel!

VEY1414 – EU Power Cable VEY1415 – US Power Cable Stock Class:

1 1

(35)

per kit RJ45 Ethernet Cable X59

BCP7

L014904 (5m Cable) L015112 (10m Cable) Details: Crossed cable for connecting the BCP7 controller (X59) with an Ethernet Switch (RJ45 connector) or Laptop.

Note: A cross over adapter might be required.

1 1

L014898

COM Interface Cable X23 (5m) BCP7

Details: 5m cable providing a COM / RS232 connection from the X23 socket of the BCP7 controller to a 9W D-Type connector (data lines uncrossed).

1

L014899

COM Crosslink Cable X23 (5m) BCP7

Details: 5m crossover cable providing a COM / RS232

connection from the X23 socket of the BCP7 controller to a 9W D-Type connector (data lines crossed).

1

(36)

per kit L014910

X29 Test-Box / Trigger-Button 1.01 BCP7

Details: The test-box can be used to trigger prints for test purposes. With the buttons and LEDs the laser can be started and stopped, the “print go” can be generated and the status is visible.

Attention: Because the

interlock circuit is shorted inside the connector the box is only intended for test and installation use by trained laser service technicians. General laser safety cannot be ensured with this tool!

Stock Class:

1

L014908

Remote-Box Kit BCP7

Details: This kit can be used to start and stop the laser

remotely. LED’s inside the buttons deliver information about the printer ready Status. Customer machine interface (for example a PCL) can be connected

simultaneously.

Stock Class:

1

(37)

per kit L014895

Pharma OQ Extender Board BCP7

Details: This extender board with its DIP-switches is used for the OQ as part of a Pharma Validation. Validation pack is available under PN: L025406 Stock Class:

1

Adaptors BCP6 to BCP7

per kit L014919

Adapter BCP6 Product Detector 10-30v NPN to BCP7

Details: Used to connect an existing NPN product detector wired for a BCP6 controller to a BCP7 controller.

Stock Class:

1

L014920

Adapter BCP6 Product Detector 10-30V PNP to BCP7

Details: Used to connect an existing PNP product detector wired for a BCP6 controller to a BCP7 controller.

Stock Class:

1

(38)

per kit L014923

Adapter BCP6 X29 X4 IEC Convers to BCP7

Details: Used to connect the customer machine interface wired for a BCP6 controller to a BCP7 controller.

Stock Class:

1

L014922

Adapter BCP6 Fume Extraction to BCP7

Details: Used to connect a fume extraction system that is wired for a BCP6 controller to a BCP7 controller.

Stock Class:

1

L014921

Adapter BCP6 Beacon 24V to BCP7

Details: Used to connect an existing BCP6 beacon to a BCP7 controller.

Stock Class:

1

(39)

per kit L014918

Adapter BCP6 Encoder 10-30V to BCP7

Details: Used to connect an existing BCP6 shaft encoder to a BCP7 controller.

Note: The BCP7 controller provides 24V. This adapter will not work with 5V shaft

encoders.

Stock Class:

1

L014924

Adapter Box BCP6 X4 to BCP7 Details: The previous machine interface X4 of the BCP6 controller is split into the interlock and the machine interface connector at the BCP7 controller. This adapter can be used to connect the BCP6 customer machine interface to a BCP7 controller.

Stock Class:

1

L015210

Adapter Encoder Lumberg to TURCK

Details: Older BEC Encoder has TURCK connector. If new standard encoder is used as spare, this adapter might be useful to connect new Encoder onto existing cable.

Stock Class:

1

(40)

Adaptor S-Series to BCP7

per kit EPP001436

Adapter S-Series Encoder 10- 30V to BCP7

Stock Class:

1

EPP001437

Adapter S-Series to BCP7 Fume Extraction

Stock Class:

1

EPP001439

Adapter S-Series Product Detector 10-30V to BCP7 Stock Class:

1

(41)

D-Series Spares Catalogue - Water Cooling

Water Cooling

per kit L015155

Water Chiller Cable X28 (5m) Details: Cable for connecting the controller with the water chiller.

1

Water Hose Kit for IP65 60w Di

L015145 (9m Pipe) L015159 (15m Pipe)

1

L015160

Dowcal 20 (20L)

Details: Coolant is for D620i IP65 water chiller. The coolant has to be changed on a yearly basis. 20 Litres of the coolant are needed to refill the chiller.

1

L015176

D620i Water Chiller Filling Kit Funnel

Gloves

Safety Glasses

Details: The funnel, gloves and safety glasses are needed for changing the coolant. (Only against coolant splashes)

1

(42)

Water Chiller Spares for Chilly 15 50/60Hz – L015148 / L015154

per kit L015148

Water Chiller D620i (Standard Finish)

Details: Cooling of the D620i IP65 version is achieved with water to improve the

performance. The chiller has an IP rating of IP20.

EC Machine Directive 2006/42/EG

1

(43)

per kit L015149

Water Chiller Pump D620i Details: Please see water chiller service instruction.

1

L015150

Water Chiller Controller D620i Details: Please see water chiller service instruction.

1

L015151

Water Chiller Flow Monitor D620i

Details: Please see water chiller service instruction.

1

L015152

Water Chiller Valve D620i Details: Please see water chiller service instruction.

1

(44)

Water Chiller Spares for new Chilly 15 EPT046340 / EPT046342

per kit EPT046340SP

WATER CHILLER CHILLY 15 STAINLESS STEEL IP55 50Hz Details: Cooling of the D620i IP65 version is achieved with water to improve the

performance. The chiller has an IP rating of IP55 and can operate at ambient temperature up to 45°C.

This chiller is for 50Hz power lines only!

1

EPT046342SP

WATER CHILLER CHILLY 15 STAINLESS STEEL IP55 60Hz Details: Cooling of the D620i IP65 version is achieved with water to improve the

performance. The chiller has an IP rating of IP55 and can operate at ambient temperature up to 45°C.

This chiller is for 60Hz power lines only

1

(45)

Common Chiller Spare Parts – 50Hz / 60Hz

TEMPERATURE CONTROLLER FOR WATER CHILLER CHILLY 15 50Hz / 60Hz

1

EPT046353SP

FLOAT SWITCH FOR WATER CHILLER CHILLY 15 50Hz / 60Hz

1

EPT046355SP

FLOW CONTROLLER FOR WATER CHILLER CHILLY 15 50Hz / 60Hz

1

EPT046356SP

AXIAL FAN FOR WATER CHILLER CHILLY 15 50Hz / 60Hz

Details: Please see water chiller service instruction.

1

(46)

44 EPT007220 Issue 10, November 2018 Common Chiller Spare Parts – 50Hz / 60Hz

CAPACITOR FOR WATER CHILLER CHILLY 15 50Hz / 60Hz

1

EPT046358SP

PUMP FOR WATER CHILLER CHILLY 15 50Hz / 60Hz

1

EPT046359SP

MAGNETIC VALVE FOR WATER CHILLER CHILLY 15 50Hz / 60Hz

1

EPT046364SP

PRESSURE SWITCH FOR WATER CHILLER CHILLY 15 50Hz / 60Hz

1

(47)

EPT046340 – 50Hz Version only

SPEED CONTROLLER FOR WATER CHILLER CHILLY 15 50Hz

1

EPT046342 – 60Hz Version only

SPEED CONTROLLER FOR WATER CHILLER CHILLY 15 60Hz

1

(48)

TouchPanel 2

per kit EPT015276

TouchPanel 2 (with Software) BCP7

Note: Shipped without any Ethernet cable.

1

Ethernet Cable X59 Controller to TouchPanel L015211 (5m Length)

L015212 (10m Length) Note: These cables replace L014905 / L014906 and can also be used to connect TouchPanel 1.

Stock Class:

1 1

(49)

D-Series Spares Catalogue - TouchPanel 2

TouchPanel Brackets

per kit EPT028096 – TouchPanel

Arm

Details: Used to mount a TouchPanel 1 or 2 to a surface Including Screws and Washers

1

EPT014751

Long Arm Assembly, TouchPanel Details: This bracket offers a mounting option for the TouchPanel 1 or 2 on a wall.

Stock Class:

1

EPT014752

Short Arm Assembly, TouchPanel

Details: This bracket offers a mounting option for the TouchPanel 1 or 2 on a wall.

Stock Class:

1

EPT013622 – ADAPTOR PLATE ASSEMBLY - DPX Details: Simple bracket to mount the TouchPanel 1 or 2 on tables or other surfaces (on the top of a DPX).

1

(50)

Guarding Label Kits

per kit

Stock Class (Customer/

Service Engineer)

Note: Shown pictures are in English (UK) as example.

L007628 – WESTERN EUROPE / AMERICAS Languages: English (US), English (UK), French, Spanish, German, Italian, Dutch

Each Set contains:

4x Laser Triangle 1x per language:

Warning of invisible

radiation and Class 1 housing including

Class4 Laser

SE

L012611 – Asian Languages Languages: Thai, Trad. Chinese, Indonesian, Simpl. Chinese, Korean, Japanese, Malaysian, English

L012614 – Central Europe Languages

Languages: Croatian, Czech, Hungarian, Polish, Romanian, Slovenian, English

L012617 – South Eastern European Languages Languages: Bulgarian, Greek, Macedonian, Russian, Serbian, Turkish, Ukrainian,

English

L012620 – North European Languages

Languages: Danish, Estonian, Finnish, Latvian, Lithuanian, Norwegian, Swedish, English

EPT016307 – Middle Eastern Languages

Languages: Arabic, Hebrew, Farsi, English

(51)

D-Series Spares Catalogue - Documentation

Documentation

Documentation Packs

D-Series i-Tech Documentation Pack (QuickStep)

Details: All of these packs will contain a generic CD-ROM with the following information.

(52)

D-Series i-Tech Documentation Pack (Dynamark)

Details: All of these packs will contain a generic CD-ROM with the following information.

(53)

D-Series Spares Catalogue - Software

Software

per kit L027961

Domino Laser Di Browser User Pack

Details: Domino Browser for Windows2000 and WindowsXP for customer HMI (Human Machine Interface) or industrial PC/laptop.

We recommend this browser for customers who do not want to use standard Java-enabled web browser software like MS Internet Explorer and Mozilla Firefox.

1

EPT011946

Dynamark 3 Label Editor Details: The Dynamark 3 label Editor is a tool to design Dynamark 3 messages

independently of a controller on a desktop PC. It is also possible to edit the live message of a controller remotely.

1

(54)

Introduction Controller Spares... 3 CF-Cards... 4 Controller PCBs... 5 Controller PSUs... 7 Controller PSUs... 8 Controller PSUs...

Contents

Introduction

Controller Spares

CF-Cards

Controller PCBs

Controller PSUs

Controller PSUs

Controller PSUs

Laser Head Spares

Laser Tube Assembly

Telescopes

Lenses

Scanner

Scan Head Mounts

Fans

Laser PCB

Silencer

Ancillaries & Spares

Brackets & Mountings

Stands

Air Cooling / Filtration

Fume Extraction

Cables

Multi-Head

OEM Machine Interface / Interlock Cables

Electrical Accessories

Ethernet

Adaptors BCP6 to BCP7

Adaptor S-Series to BCP7

Water Cooling

Water Chiller Spares for Chilly 15 50/60Hz – L015148 / L015154

Water Chiller Spares for new Chilly 15 EPT046340 / EPT046342

TouchPanel 2

TouchPanel Brackets

Guarding Label Kits

Documentation

Documentation Packs

Software

Notes