Dali Lighting Products

(1)

cmselectra.com

Wiring + Power

Solutions

Dali Lighting

Products

Dali Lighting Pr oducts

(2)

CMS Quick Flex 5 Pole Cabling Solution

The CMS 5 Pole product is a tried and tested system being used into major projects across Australia and New Zealand for the past ten years. The CMS Quick flex cabling solution is a modular five pole softwiring system for Dali, DSI, CBUS, KNX & other systems requiring 5 wire lighting systems. CMS Quick Flex Cabling has its own unique CMS connector system which insures excellent conductivity without the concern of separation at joints. Connectors can only be separated by a tool.

CMS Quick Flex Cabling Solution is ideal for the following applications: Education, Retail, Health, Commercial Offices, Airports & Public Sectors.

CMS Electracom are able to supply large quantities of our Quick flex products, in most cases, at short notice due to large stockholdings across all major capital cities in Australia and New Zealand. The existing relationships with prominent education institutions, consulting engineers and leading electrical

engineers contractors around Australia & New Zealand ensure priority service and proactive response by professionally trained CMS personnel.

The use of the CMS Quick flex modular wiring system will drastically reduce installation time for the contractor, delivering you cost savings on site.

The 5 Pole modular wiring system is increasing amongst new projects in Australia and New Zealand, and is being specified more frequently by designers and engineers. The energy efficiencies achieved by this form of modular wiring delivers exceptional cost savings, and most importantly sustainable design solution management to the end-user.

CMS is committed to contributing to sustainable design

At CMS, we have long been of the opinion that environmental issues must be factored into the building design of the future. CMS Electracom is a company committed to Corporate Social Responsibility. How we implement this is through product stewardship, best practise purchasing to meet Australian standards, bringing alternative and reduced environmental impact products to our clients.

The Quick Flex system is environmentally friendly, having ROHS and Best Environmental Practice Certification. To ensure your project adheres to Green Star rating, CMS have direct access to supply certified PVC-Free cabling system that have been stringently tested by independent laboratories to meet Green Star compliance.

(3)

SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com

Features & Benefits of CMS 5 Pole Solution

♦ Installation time for the contractor is drastically reduced, delivering up to 30% reduction in labour costs

♦ Reduction in Waste - Zero onsite material waste

♦ Uncomplicated wiring layout, requiring only 4 components for a total solution! ♦ Cost & Energy Efficient

♦ Safe & Easy Maintenance - isolation during maintenance by removing a single light lead from the bank of ‘T’ pieces.

♦ Simple integration

Why deal with CMS Electracom?

♦ Supplying wiring & power solutions since 1979 ♦ Access to industry trained professionals

♦ Ability to supply small to large orders to meet your project schedules ♦ Dedicated CMS designers and engineers to support custom solutions

♦ Local support by CMS Offices in Sydney, Melbourne, Brisbane, Perth, Auckland, London & Singapore

(4)

CMS Quick Flex 5 Pole Installation Examples

How we work?

1)

Design

2)

Develop

3)

Deliver

CMS will take you through the process from concept to completion of wiring and power requirements.

CMS experienced team of professionals are trained to provide consultation, estimating & engineering support to all your project needs.

(5)

Introducing the CMS 5 Pole Solution

Image

Part Number

Description

QF1

Starter Socket - Transition between hard and softwiring Tunnel terminals to A5.2 Socket

QF2

Interconnecting Lead, 5 core, 3x2.5mm² (A,N,E) & 2x1.5mm² Dali, A5 Socket to Plug

QF3

Supply Cable, A5.1 Plug to free end, 5 core, 3x2.5mm² (A,N,E) & 2x1.5mm² Dali.

QFS3 A5.2 Socket to free end, 5 core, 3x2.5mm² (A,N,E) & 2x1.5mm² Dali

QF3a Supply Cable, A5.1 Plug to free end, 5x1.0mm², maximum 2.5metres

For Special Project Pricing, Email Your Plans To

[email protected]

(6)

Image

Part Number

Description

QF3b

Supply Cable, A5.1 Plug to B5.2 Socket. Mates with QF6 Light Plug. 3x2.5mm² (A,N,E) & 2x1.5mm² Dali.

QF3c

Supply Cable, A5.1 Plug to B5.2 Socket. Mates with QF6 Light Plug. 5x1.0mm², maximum 2.5metres

QF4 A5 Plug/Socket with tails for direct connection.

QF5 Interceptor allows splitting of Dali & Power circuits, i.e. when adding new power circuit.

QF6 Lighting Adaptor B5.1 Plug - Push fit termination.

(7)

Image

Part Number

Description

B5T ‘T’ Adaptor IN/OUT A5 connector and B5.2 Lighting Socket.

B5.212 B Type Socket - Rewireable.

A5.T ‘T’ Adaptor 1 IN/2OUT A5 connector.

(8)

Notes:

- Standard colour for light lead is Black (BK) or White (WT) - Standard colour for 5 Pin socket is White (WT)

5 Pole Plug & Socket

ORDERING INFORMATION

PART NO. DESCRIPTION

QF75WT Single 10Amp 250v 5 pin Socket - White

QF7A-25BK 2500mm 5pin ROHS ROHS ROHS ROHS Light lead 10amp 5 x 1.0mm² - Black QF7A-100BK 10,000mm 5pin ROHSROHSROHS Light lead 10amp 5 x 1.0mmROHS ² - Black QF7A-25WT 2500mm 5pin ROHS ROHS ROHS ROHS Light lead 10amp 5 x 1.0mm² - White QF7A-100WT 10,000mm 5pin ROHSROHSROHS Light lead 10amp 5 x 1.0mmROHS ² - White PLEASE CALL US FOR THE MOST UP TO DATE SPECIFICATIONS AND PRICING

QF75 Shown

5 Pin plug shown

The CMS 5 pole plug base is the latest socket designed by CMS Electracom suitable for Dali, DSI and BMS lighting control networks. The system is used as an alternative to our Quick Flex 5 pole ‘plug and play’ system.

The CMS 5 Pole plug base will also accept a standard Australian 3 pin plug so you can future proof your next installation if a lighting control system is desired at a later stage.

Nearly every new office today incorporates some level of intelligent light level sensors, movement sensors, zoned lighting scene setting and time clocks.

In areas where you have exposed ceilings or long distance between light fittings/devices the CMS 5 pole plug base system will provide a convenient and cost effective solution for your next installation.

(9)

5 Pole Dali 5pin Plug Base Application

Part No: QF75

Step 1:

Strip cable to recommended length.

Step 2:

Terminate cable wiring into terminal blocks, ensure correct polarity, use break-out areas in socket body to allow cable entry and exit.

Step 3:

Mount unit using screw mounting holes onto industry standard conduit mounting block or use mounting plate provided.

Rating - 10A 250V a.c

Conductor range - 1.0mm2 to 2.5mm2 solid/ stranded to AS/NZS5000

This product must be installed by a qualified electrician.

Disconnect power supply before connecting or disconnecting this product.

Active contacts rated low voltage max. 10Amps Step 1:

Step 2:

Step 3: