• No results found

Asymmetries between achromatic and chromatic extraction of 3D motion signals

N/A
N/A
Protected

Academic year: 2020

Share "Asymmetries between achromatic and chromatic extraction of 3D motion signals"

Copied!
10
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1.Stimulus design for the MID fMRI experiment.MID stimuli isolated mechanisms based on CD (A) orIOVD (B)
Fig. 2.(A and B) ROI definition in an example partici-
Fig. 4.Results from the whole-brain analysis showing group-levelresponse to CD and IOVD control stimuli.below the scale bar illustrate the stimulus chromaticity.(#), IPS-0 (##), LO-1 ( z-statistic maps for responses to achromatic (A–C) and S-cone (D–F) MID
Fig. 5.Results from the ROI analysis showing relativeresponses to different MID stimuli in a network ofareas
+2

References

Related documents

It was in response to these agitations that the colonial government enacted the Gold Coast Trade Unions Ordinance, 1941 to regularize the activities of these unions.. The

The lesser the APRI score ( ˂ 0.5), the greater ability to rule out cirrhosis and the higher the value (> 1.5) the greater the positive predictive value to rule in

Co-localization of the Receptor for Advanced Glycation End Products (RAGE) with S100 Calcium-Binding Protein B (S100B) in Human Umbilical Vein Endothelial.. Santamaría

The position of the objects viewed by the different cameras is consequently projected on a common ground plane which can be seen as a virtual top-view of an entire soccer field..

Owing to the efficacy and popularity of anastrozole in the treatment of estrogen receptor-positive breast cancer, interest in analytical methods for its quantitative measurement

By considering a model of the geographical distribution of DCs which uses a wideband optical network, renewable energy and sharing resources for new generations of mobile

While different control algorithms have been proposed for CAVs, the benefits brought about by connectedness of autonomous vehicles to other vehicles and to the infrastructure,

The station delivers Level II (208/240V @ 30 A) charging and is compatible with plug-in electric vehicles that comply with the SAE J1772™ plug-in electric vehicle charging