• No results found

Review on Design of Residential IoT based Smart Energy Meters

N/A
N/A
Protected

Academic year: 2020

Share "Review on Design of Residential IoT based Smart Energy Meters"

Copied!
6
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig -1: overall system architecture
Table -1: ACS712 20A current sensor specification
Fig -8 smart energy meter prototype
Fig -10: Real time energy consumption

References

Related documents

Given that the station uses different presenters who may be non-native speakers of some of the target languages of the listeners of Mulembe FM newscasts, the

The design of the robot controller is based on STM32F103VET6 as the main control chip, the car through the ultrasonic ranging to get the distance of the obstacle

3: The effect of PTU-exposure (1.5, 3, and 6 ppm) and levothyroxine therapy (Hypo 6 ppm + Levo) on the distance moved (A) and the escape latency (B) of the male

Wag/Rij rats (an animal model for generalized absence epilepsy), were used.. as

The jurisdiction and discretion granted to the coastal state regarding it^s fishing resources should therefore be implemented into national legislation to the benefit of such

1) In this present cooling tower on which performance is tested the biggest contribution is that “Nylon Net” is used as filler material which is never used before in existing

The anti- oxidant activity was performed by DPPH free radical scavenging method using ascorbic acid as standard and compound IIa, IIc and IId showed significant free

The aim of this paper is to study about Fly ash Cement Bricks which are manufactured by composition of Fly ash, cement and sand with requisite quantity of water mixed in