RH22V. Cordless Vacuum Cleaner USER GUIDE. A powerful vacuum cleaner, light and maneuverable

2

-RH22V

RH22

ASSEMBLY

User Guide

3

-RH22V

SAFETY PRECAUTIONS

1. This appliance can be used by children aged from 8 years and above and people with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

2. This appliance is designed for domestic use only.

3. Do not pull on the adaptor power cord, but rather on the plug itself. 4. Do not use outdoor.

5. Do not leave the appliance unattended when it is switched on.

6. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified technician in order to avoid a hazard.

7. The following objects are strictly banned, otherwise the vacuum cleaner will be damaged or risk of fire and injuries may occur:

• Don’t pick up large or sharp broken such as glasses.

• Don’t pick up harming liquid solvents like gasoline, detergent or corrosive acids. • Don’t pick up inflammable or explosive substance such as gasoline or alcohol. 8. Check the device and connections regularly for visible damage. The device must not be used if the housing is damaged or other damage is present.

9. Never attempt to open the device or the main adapter yourself or to replace the connecting cable. Always has repairs to the device carried out by a specialist workshop. There is considerable danger to the user if repairs are faulty.

10. Do not trap the main adapter cable and when using the adapter, pay attention to where the cable is to prevent any danger of tripping over it. Keep the cable away from heated surfaces (e.g. cooker surfaces).

11. Do not touch the main adapter and cable with wet hands.

12. Do not point the vacuum cleaner at persons or animals when in operation. 13. Only use the main adapter on dry surfaces.

14. Only use the device with the accessories supplied.

15. Please keep these instructions in a safe place. Use only with the provided adapter.

16. The appliance must only be supplied at safety extra low voltage corresponding to the marking on the appliance.

17. This appliance includes Li-ion batteries; do not incinerate the batteries or expose to high temperatures, as they may explode.

18. This appliance is only charged with the adapter delivered together.

4

-RH22V

4. Turbo brush for hardfloor 5. Brush clip

6. Filter

7. Lock for the filter compartment

5

-RH22V

TECHNICAL DATA

Unpacking and Assembling

Check that all the parts in the box. (See page. 4)

Step 1.

Install the battery as shown in the drawing below.

Step 2.

Insert the power brush carefully in the aluminum tube as shown in the drawing below.

Model RH22V

Rated voltage 22.2V d.c.

6

-RH22V

Step 3.

Insert the aluminum tube with the power brush into the vacuum as shown in the drawing below.

Step 4.

Insert the 3 in one accessory to the aluminum tube or to the vacuum as shown in the drawing below.

User Guide

Vacuuming floors and carpets

You should regularly check that the nozzle cushions and the brush roller are clean in order to avoid scratching sensitive floors.

Following Step 1 to Step 3 to assemble the whole unit and then start the device by pushing ON/OFF button.

Simply push out the tip

Push and slide

7

-RH22V

CHARGING

Insert the adapter into the mains socket (Note: Always make sure that the appliance is turned off) and then connect to the device. The indicator light will flash once the device has made contact with the adapter.

It takes 3 hours or so to fully charge the battery before the first use. The light will turn off once the battery loading is done and the appliance ready to use. In order to ensure that it is always ready when you need it, the appliance should always be left connect-ed with the adaptor when it's not in use.

The adaptor may become warm during charging : this is normal.

Your cordless vacuum cleaner RH22V may come with a charging station : this is optional.

If it so, put the battery on the charging base, always away from heat sources and wet places.

Insert the adaptor into the main socket and connect to the charging station, as shown in the drawings below.

User Guide

Vacuuming tables, furniture, car seats, etc.

To clean the tables, furniture, car seats or some corners, just remove the tube by pressing the release button. And following step 4 to install the 3 in1 tools.

Press ON/OFF button to start the cleaning.

- 1st _{CLICK : START THE VACUUM.}

- 2nd _{CLICK : START THE ELECTRIC BRUSH AND THE VACUUM AT THE SAME TIME.}

8

-RH22V

HOW EMPTYING / CLEANING

2. Press the release button to open the dust hatch, then drop out the dust into a trash pan as shown in the drawing below.

3. Remove the dust cup by pressing the release button; clean the cyclone component with a toothbrush. Make sure that the parts are dry before they are assembled back for next using.

1. Remove the accessories from the body by pressing the release button provided to that purpose as shown in the drawing below.

User Guide

Vacuuming tables, furniture, car seats, etc.

To clean the tables, furniture, car seats or some corners, just remove the tube by pressing the release button. And following step 4 to install the 3 in1 tools.

Press ON/OFF button to start the cleaning.

- 1st _{CLICK : START THE VACUUM.}

- 2nd _{CLICK : START THE ELECTRIC BRUSH AND THE VACUUM AT THE SAME TIME.}

9

-RH22V

User Guide

FOR CLEAN OR REPLACE THE FILTER

4. Press the button to open the front cover and take out the filter. Wash the filter under flowing water. Let it completely dry before reusing it again (Make sure the filter is dry before next time using).

To replace with a new filter, press the button to open the front cover and take out the use filter and put a new filter as shown in the drawings blow.

TO REINSTALL THE COMPONENTS

First, reinstall the dust cup back to the unit following up the opposite procedures when detaching the dust cup.

Then install the filter, the aluminum tube, the brush or 3 in 1 tools for next time using as shown in the drawing below.

If the roller brush becomes blocked or jammed with debris, the vacuum will shut down, or be less efficient.

The roller brush may then need to be cleaned. Switch off the device first and then carefully use a pair of scissors or a sharp knife to remove any items such as hairs that may have become entangled.

HOW TO CLEAN THE ROLLER BRUSH

If the roller brush needs cleaning, push the lock button on the bottom of brush with a finger or a coin, then uplift the lock button. Take out the brush. When the cleaning is done, put the roller brush in place and push down the lock button. Note that the lock button cannot be removed from the brush, only lift up.

10

-RH22V

User Guide

How to install the wall-mounted and

store the vacuum cleaner

Install the wall-mounted tool on wall with the plugs and screws. Then put the vacuum cleaner on the hook as shown in the drawing to store your device.

If the roller brush becomes blocked or jammed with debris, the vacuum will shut down, or be less efficient.

The roller brush may then need to be cleaned. Switch off the device first and then carefully use a pair of scissors or a sharp knife to remove any items such as hairs that may have become entangled.

Cleaning of Wheel Axles

If a wheel is jammed with debris: remove the wheels by carefully by using a screwdriver inserted into the cavity. Remove any debris that may have jammed the wheel axles. Reassemble the wheels by pressing them tightly together.

If the roller brush needs cleaning, push the lock button on the bottom of brush with a finger or a coin, then uplift the lock button. Take out the brush. When the cleaning is done, put the roller brush in place and push down the lock button. Note that the lock button cannot be removed from the brush, only lift up.

NOTE: do not wash the roller brush with water.

Hardfloor Cleaning Brush

11

-RH22V

Made in China

If your vacuum cleaner comes with a OPTIONAL charging station, insert the

handheld vacuum cleaner into the station, then put the aluminum tube into the hook as shown in the drawing.

NOTE: THE CHARGING STATION IS OPTIONAL.

Basic Technical Data

BATTERY: 22.2 V 2200 mah Li-ion ADAPTER: Input 100~240V 50Hz OUTPUT:27V 800 mah

CHARGE TIME: 3 hours

DISPOSAL

If the device is to be disposed, the battery should be removed. Used battery should never be disposed with household waste. A battery should always be taken to a recycling station.

G U ID E D 'U TI LI SA TE U R R H 22 V - F R-EN

ATTENTION

CONGRATULATIONS & THANK YOU

for having chosen one of our product.

Do not return the unit to the retailer before having spoken with us. Our most precious wish is that you really love your vacuum cleaner!

In case of problems, contact our experts at 1 800 361-2043 or by email at info@johnnyvac.com

VISIT OUR WEBSITE AT

www.rhino-vac.com