Thank you for purchasing this Panasonic product. Please read this manual carefully before using this product and save this manual for future use.

• If screen standby mode ends and no image is visible, check to see if the display or video camera’s power saving settings are enabled.. Check each device’s manual for more

• If screen standby mode ends and no image is visible, check to see if the display or video camera’s power saving settings are enabled.. Check each device’s manual for more

Therefore, in the diagram below, if router A, whose IP address is assigned as the default gateway IP address of the PBX and the IP telephones, fails, VoIP communications are no

Description Specifies whether to synchronize the Do Not Disturb and Call Forward settings, configured via the Web user interface or phone user interface, between the unit and the

Therefore, in the diagram below, if router A, whose IP address is assigned as the default gateway IP address of the PBX and the IP telephones, fails, VoIP communications are no

The IP address of the SIP Extension, the subnet mask address, and the default gateway address can be assigned to the SIP Extension automatically by the DHCP serverb. The IP address

There must not be any deformations on the housing, color lenses, fixations and installation spots (ceiling, suspension, trussing). Mechanically moved parts must not show any traces

If CA Server is installed on your network, you can make or transfer calls to users of other PBXs after confirming their presence from the contact list.. You can also chat with users