9/21 E.

(1)

E

www.now.huelsta.com

(2)

2

now! easy E 9. 2021

Carcase in carcase versions

Front in front versions

Front in front versions Assembly units

Rear wall in accent version 1 (pure white lacquer, light grey lacquer, natural oak)

Cabinets

Wall bookcase Assembly units and media lowboard with open compartment

Surround frame of the open compartment in accent version 1 (pure white lacquer, light grey lacquer, natural oak)

Wall design box

Door in accent version 2 (pure white lacquer, light grey lacquer, sand lacquer, teal blue lacquer, old rose lacquer, pastel green lacquer, dark blue lacquer, dark green lacquer, vanilla yellow lacquer, violet lacquer, natural oak, core walnut)

1 1

1

Carcase in carcase versions

2

Legs

Brushed stainless steel Carcase in carcase versions

• hülsta-Push-to-open: All drawers, hinge-doors and flaps with hülsta-Push-to-open

• Since 1996, we are entitled to label all of our modular furniture and base frames with the strictly regulated “Blue Angel“, which awards products that are low in emissions and especially environmen- tally friendly.

• Important note: Because orders are read automatically, the correct type number for the required unit must be stated in the order. Please be sure to remember this in the order!

Brushed stainless steel

Versions Legs Versions Carcase and front

Pure white lacquer

Versions Accent 1:

Frame and rear wall

Pure white lacquer Light grey lacquer

Natural oak ₁

Versions Accent 2:

Door of wall design box 2

Price group I Pure white lacquer Price group II Light grey lacquer Sand lacquer

Price group II Teal blue lacquer Old rose lacquer Pastel green lacquer Dark blue lacquer Dark green lacquer

Price group II Vanilla yellow lacquer Violet lacquer Natural oak Core walnut

(3)

3

now! easy E 9. 2021

Planning assembly units / cabinets

Planning step 1 Planning step 2

With now! easy it is possible, to stack assembly units. In this case a wall bracket must be ordered for each stacked unit.

Stacking assembly units Planning notes

Choice of optional legs or wall bracket and optional lamp

The wall bracket is necessary for fitting assembly units and cabinets on walls (stacking or suspending). In this case the legs are omitted. Note: wall units always include a wall bracket. If units are to be fitted on legs, legs must be ordered for each unit.

Choice of unit in the required version

Important note:

Because orders are read automatically, the correct type number for the required unit must be stated in the order.

Please be sure to remember this in the order!

Dining tables and chairs:

see now! dining type list. Wardrobes:

see now! wardrobes type list. Beds:

see now! sleeping type list.

Planning cabinet and bookshelf in the versions A and B

Planning step 1

Note on cabinets and bookshelves in the versions A and B:

Due to the different glass cut-out sections in the cabinets A and B, the shelves in the cabinets are at different height positions. If the shelves of the bookshelf shall have the same height position as the cabinet, cabinet A has to be combined with bookshelf A resp. cabinet B with bookshelf B.

A B A B B

Choice of unit in the required version

A B

39,937,132,132,126,5 32,126,537,139,932,1

Compartment heights of

cabinet A and bookshelf A Compartment heights of cabinet B and bookshelf B - Flap hinge

- Wall units - Maximum loads

- Quality of walls / assembly instructions

(4)

4

now! easy E 9. 2021

349,8 179,2 44,825,6

Article

Accents in light grey lacquer Accents in natural oak

Order no.

Accents in pure white lacquer

Article

Order no.

Special combination Order no. as illustr. / vice versa

992123 / 991123 992124 / 991124 992125 / 991125

- - - 1

Frame Rear walls

Special combination Order no.

990013 990014 990015

- - -

M = Media lowboard 349,8 179,2 44,825,6

R

M

L/R = Door hinge of cabinet left/right

25,044,8

334,0

128,0 128,0

128,0

992024 / 991024 992025 / 991025 992023 / 991023

Special combination

1 Frame Rear walls

- - - Order no. as illustr. / vice versa

33,044,8

340,0 128,0

64,0 64,0

128,0

990113 990114 990115

-- - M = Media lowboard

M

25,044,8

334,0

128,0 128,0

128,0

33,044,8

340,0 128,0

64,0 64,0

128,0

44,825,6 44,825,6

179,2

44,825,6 179,2

1 Frame Rear walls

R

44,825,6

25,6 25,6

1 Frame Rear walls

(5)

5

now! easy E 9. 2021 L/R = Door hinge of cabinet left/right

Article

Order no.

Accents in pure white lacquer Order no.

991163 991164 991165

-- - Special combination

180,7 44,8102,433,044,8

270,0 64,0 128,0

51,2 51,2

1 Frame

Article

Order no.

1 Frame Rear walls

Special combination M = Media lowboard

1 Frame Rear walls Wall design box

M = Media lowboard

- - -

991153 991154 991155

-- - Note:

Shaded dark grey in sketch

= door of the wall design box in the same version as the accent of the frame

Order no. as illustr. / vice versa 991133 / 992133 991134 / 992134 991135 / 992135

M

L + R

M

R

33,044,8 25,0

320,0

128,0 128,0 64,0

33,044,8 25,0

384,0

128,0 128,0 64,0 64,0

51,2 51,2

Order no.

Special combination

990053 -

64,025,633,0

44,8

340,0 128,0

64,0 64,0

128,0

44,8102,4

179,2

44,825,6 179,2

25,6

(6)

6

now! easy E 9. 2021

Article

Order no.

Suggested combination Order no.

Article

Order no.

NEW NEW

NEW

980273 980274 980275

-- -

NEW

980263 980264 980265

-- -

980223 980224 980225

- --

980213 980214 980215

- -- 1

Frame

1 Frame 1

Rear walls

1 Rear walls

44,8

128,0 192,0 64,0

25,0

77,6

25,6 25,6

128,8204,8 33,0 25,0

128,0 128,0

220,0

44,8 25,6 44,8

128,0 256,0

128,0

44,8

M = Media lowboard M

25,6

(7)

7

now! easy E 9. 2021 Article

Order no.

Article

Order no.

Suggested combination Suggested combination

Order no.

NEW NEW

NEW

980233 -

980243 980244 980245

-- - Accents in light grey lacquer

Accents in natural oak

1 Rear walls Order no.

980253 980254 980255

- - -

Wall design box 1

44,8

64,0

256,0

128,0 64,0

33,044,8

128,0 51,2

201,2 51,2

44,8 44,851,2179,2

25,044,8

128,0 238,6

64,0

25,621,025,6

44,8128,0

(8)

8

now! easy E 9. 2021

Article Order no.

96,0

180,7

980113 -

44,8

64,0 32,0 96,0

128,0

180,7

980143 -

44,8

64,0 128,0

32,0 32,0

M = Media lowboard Note:

Shaded dark grey in sketch

= door of the wall design box in the same version as the accent of the frame

Frame Wall design box

1

980083 980084 980085

- - -

M

33,044,8

51,2 51,2

284,0 64,0 128,0

1 Frame

- 980014

980015 980013

- -

33,044,8

308,0

64,0 128,0 64,0 51,2

51,2

180,7 180,7

44,844,8 51,2 44,864,0 44,8

(9)

9

Order no.

Article

Order no.

Accents in pure white lacquer Accents in light grey lacquer Accents in natural oak

- -- 980024

980025

980023 -

-- 980034

980035 980033

Suggested combination

1 Frame Rear walls 1

Frame

33,044,8

270,0

64,0 128,0

51,2 51,2

25,044,8

333,0

25,6

25,6 25,6

64,0 128,0 64,0

- - 980044 -

980045 980043

1 Frame Rear walls

33,044,8 25,0

25,6 25,6

372,0

64,0 128,0

128,0

64,0

332,8

222,4

980163 980164 980165

- -- Order no.

1 Frame Rear walls

33,044,8 25,0

333,0

128,0 128,0

51,2 25,6 25,6 51,2

25,6

268,8 180,7 44,8

180,7 102,4 128,0

44,8 64,0

44,8

128,0 44,851,2128,0

Order no.

(10)

10

now! easy E 9. 2021

Accents in light grey lacquer Accents in natural oak Accents in pure white lacquer

320,0

204,8

980153 980154 980155

- - -

Order no. Order no.

980123 980124 980125

-- -

1 Rear walls 1

Frame Rear walls

33,044,8 25,0

320,0

128,0 64,0

51,2 51,2

51,2 25,6

33,044,8 25,0

230,4 128,0

80,0

51,2 51,2 163,0

128,0

Accents in pure white lacquer 980293 -

NEW

980283 -

NEW

128,0

44,8

64,051,2128,0 51,273,2

25,6

76,8

128,0

44,8

76,8

(11)

11

Order no.

Accents in pure white lacquer Accents in light grey lacquer Accents in natural oak

NEW

980323 -

980313 -

230,4

51,2

980183 980184 980185

- - - 1

Rear walls

33,0 25,0

230,4

51,2 128,0 51,2

NEW

980053 -

44,8

256,0

64,0 128,0 64,0

44,8

64,0 192,0 128,0

44,8

64,0 192,0

64,0 64,0

65,5 65,5

51,2 64,0

(12)

12

now! easy E 9. 2021

NEW

980303 -

NEW

980333 -

Order no.

980173 -

Order no.

NEW

980343 -

128,0

44,8

64,0

44,8

128,0

64,0 64,0

128,0

44,8

110,3 140,8

140,8 129,5

(13)

13

Order no.

980063 -

NEW

980353 -

1 Rear walls

NEW NEW

Article

Order no.

Accents in pure white lacquer 980363

980364 980365

- --

980373 -

Wall design box 1

44,8

64,0 151,0 64,0

44,8

128,0

64,0 64,0

129,5 33,0

51,2 115,2

64,0

33,0

51,2 115,2 64,0

180,7 204,8

204,8

(14)

14

now! easy E 9. 2021

25,6

192,0

204,8

Order no.

980203 -

64,0 192,0

128,0

51,2 51,2

33,0

166,4

204,8

Order no.

980133 980134 980135

- -- Suggested combination

33,0

64,0 166,4

51,2 51,2

Wall design box 1

179,2

204,8

Order no.

980193 -

33,044,8

64,0 179,2

51,2 64,0

204,8 102,4 204,8 102,451,2

204,8 102,464,0

(15)

15

now! easy E 9. 2021

LegsIf units or cabinets are to be fitted on legs, legs must be ordered for each unit / cabinet.

44.8 cm high (46.3 cm high incl. 1.5 cm high plinth adjusters)

1 Frame Free choice of revolving

door hinge (left or right);

standard delivery with right door hinge.

Wall bracket

Necessary for wall assembly (stacking or hanging) of assembly units and cabinets.

3 drawers 3 drawers 2 drawers, 1 open compartment

1 Frame

Assembly units

H x W x D in cm Article

Accents in pure white lacquer Accents in light grey lacquer Accents in natural oak Order no.

- 43403

44.8 x 64 x 44.8

43103 -

44.8 x 128 x 44.8 44.8 x 128 x 44.8

Assembly unit 3R Assembly unit 3R Assembly unit 3R Media lowboard 3R

Assembly unit 4R

64 x 64 x 44.8 Assembly unit 4R

64 x 128 x 44.8 Assembly unit 4R

64 x 128 x 44.8

44413 - 44103 -

44114 44115

44113 -

--

Article Wall bracket

for 128 cm width for 64 cm width

Order no. Order no. Order no. Order no.

Order no.

44.8 x 128 x 44.8

Order no.

Legs for assembly units (set of 4) Order no.

102 - 103 -

12.8 cm high

465 -

43613 43614 43615

- - - 43113

43114 43115

-- -

Usable inside dimensions of open compartment:

height: 9.3 cm; width: 122.6 cm; depth: 40.0 cm

Usable inside dimensions of open compartment:

height: 9.3 cm; width: 122.6 cm; depth: 40.0 cm

1 door 2 doors

Assembly unit 4R Assembly unit 4R

64 x 64 x 44.8 64 x 128 x 44.8

Free choice of revolving door hinge (left or right);

44403 - 44133 -

H x W x D in cm Article Order no.

Accents in pure white lacquer 64.0 cm high (65.5 cm high incl. 1.5 cm high plinth adjusters)

Assembly units

(16)

16

now! easy E 9. 2021

Cabinet B, bookshelves B

The standard rear wall for the cabinet is in pure white lacquer. The cabinet is provided with a reversible rear wall for the glass panel (one side light grey lacquer, other side natural oak). This is

supplied free of charge.

L

1 door

H x W x D in cm

Article Cabinet 10R

179.2 x 64 x 44.8 Bookshelf B Bookshelf B

Order no.

Order no.179.2 x 32 x 44.8 Order no.

Open compartments

Arrangement of shelves as in cabinet B

42333 - 42363 -

42213 L / 42223 ROrder no. - 179.2 x 64 x 44.8

L

is in pure white lacquer. The cabinet is provided with a reversible rear wall for the glass panel (one side light grey lacquer, other side natural oak). This is

supplied free of charge.

1 Rear walls

H x W x D in cm

Article Cabinet 10R

179.2 x 64 x 44.8 Bookshelf A Bookshelf A

Order no.

Order no.179.2 x 32 x 44.8 Order no.

as in cabinet A

42233 - 42263 -

(180.7 cm high incl. 1.5 cm high plinth adjusters)

41213 L / 41223 ROrder no. -

179.2 x 64 x 44.8

LegsIf units or cabinets are to be fitted on legs, legs must be ordered for each unit / cabinet.

Wall bracket

Necessary for wall assembly (stacking or hanging) of assembly units and cabinets.

Article Wall bracket

for 128 cm width for 64 cm width

Order no.

Legs for assembly units (set of 4) Order no.

LED lamp 2.0 W Order no.

LED lamp for compartments behind cabinet doors; incl.

footswitch and preliminary transformer. Colour of light:

cold white. Lamps can also be fitted later.

This luminaire contains built-in LED lamps of the energy classes A++ to A. The lamps cannot be changed in the

luminaire. 12 V

110 -

102 - 103 -

12.8 cm high

465 -

L/R = Door hinge of cabinet left/right

1 Rear walls

(17)

17

now! easy E 9. 2021 H x W x D in cm Article

Wall bookcase 25.6 x 128 x 25 -

42103

25.6 x 128 x 33Wall unit

Order no.

Accents in pure white lacquer 42113

42114 42115

- - -

Wall design box

51.2 cm high

Wall design box always with carcase in pure white lacquer version and incl.

wall bracket

1 door

Accents in pure white lacquer Accents in light grey lacquer Accents in sand lacquer Accents in teal blue lacquer Accents in old rose lacquer Accents in pastel green lacquer Accents in dark blue lacquer Accents in dark green lacquer Accents in vanilla yellow lacquer Accents in violet lacquer Accents in natural oak Accents in core walnut

Order no.

Wall design box 2

Wall design box 51.2 x 51.2 x 33 44503

44504 44509 44500 44506 44507 44512 44513 44514 44515 44505 44501

-- - - -- - - -- - -

Can be fitted horizontally and vertically

Clothes panel, mirror

H x W x D in cm

Article Clothes panel Mirror

204.8 x 64 x 33 102.4 x 51.2 x 2.3

Order no.

41243 - 4643 -

Clothes panel incl. hat shelf, clothes rod and 3 bag hooks

Table with substruc- ture at one side

Table with substructure at one side for placing on top of 64 cm high assembly units;

table is pivotable by 30° to the left and right

Table ET 22 stand-alone:

see now! dining type list.

H x W x D in cm Article Order no.

Table 123 73.2 x 123 x 80 Order no.

Table 143 73.2 x 143 x 80 Order no.

Table 163 73.2 x 163 x 80 Order no.

41283 - 41483 - 41683 -

Mobile container

Order no.

1570L -

Mobile container 57.8 x 43.3 x 59

NEW

Free choice of revolving door hinge (left or right);

(18)

18

now! easy E 9. 2021

(19)

19

now! easy E 9. 2021

Important note!

Please do not forget to include the following details with each order. This avoids time-consuming correspondence and unnecessary delays in delivery.

Version(s) Customer Date Commission

Check list

1.) Do the sketch and the order match? Do the dimensions and the sketch match the type number?

Are all type numbers correctly stated in the sketch? Can one see the position of door hinges?

2.) Are all type numbers correct? Have you perhaps confused price and type numbers?

3.) In combinations of wooden and lacquer versions: is it clear which units are to be delivered in which version?

4.) Is it clear whether the types ordered are to be employed as wall units or as plinth units? Have you remembered the wall bracket for wall units?

5.) Are all accessories such as lamps etc. included in the sketch?

6.) Is this an additional order? If so, when was the original order? If possible, include a sketch on which the existing and new units are clearly marked.

Please also remember the planning notes on the introductory pages!

32,0 64,0 96,0 128,0 160,0 192,0 224,0 256,0 288,0 320,0

Base sketch Scale 1 : 25

44,8 33 25

Legs Assembly units Assembly units Cabinets, bookshelves

1,5 44,8 64,0 179,2

(20)

20

now! easy E 9. 2021

Infrared repeater set The following applies:

• At least 4 cm distance between unit and front

• One set must be used for each compartment

• The transmitter must be placed in the immediate vicinity of the receiver eye of the media unit

• High-frequency signals cannot be transmitted The IR repeater set consists of:

• 1 receiver eye (ø 3.0 cm) incl. standing bracket (4.2 x 5.5 x 3.0 cm)

• 1 electric transmitter

• 1 plug EVG 12 V

• Cable clamps

for lowboards (1 set per compartment) Article

Order no.

Cable aperture assembly set

Cable aperture assembly set

Cable aperture assembly set for fitting cable apertures on site in cover shelves, carcases, centre partitions and rear walls in wood/lacquer/high-gloss lacquer versions. The cable aperture drill bit can be used with all standard power drills.

The cable aperture assembly set consists of:

• 1 cable aperture drill bit (Ø 60 mm)

• 3x cable aperture type K3 (aluminium colour)

Please be sure to follow the information and notes in the assembly instructions!

Cable aperture assembly set

7777-

1111 -

(21)

21

now! easy E 9. 2021

On the basis of the sizes you can estimate approximately how wide a lowboard for example has to be so that the flatscreen TV does not protrude at the sides.

37’’ = approx. 94 cm

42’’ = approx. 106 cm

46’’ = approx. 117 cm

55’’ = approx. 140 cm

approx. 80 cm wide approx. 91 cm wide approx. 102 cm wide

approx. 121 cm wide

approx. 46 cm high approx. 57 cm high

approx. 51 cm high 50’’ = approx. 127 cm

approx. 62 cm high

approx. 68 cm high

approx. 132 cm wide 60’’ = approx. 152 cm

approx. 74 cm high

Flap hinge

If not otherwise marked in the type list, all the units with a flap have the flaps hinges at the bottom.

Flap hinge

approx. 110 cm wide

approx. 147 cm wide approx. 138 cm wide

65’’ = approx. 163 cm

approx. 80 cm high 75’’ = approx. 190 cm

approx. 85 cm high

(22)

22

now! easy E 9. 2021

Further notes:

If 2 - 10 Raster (assembly) units are included as wall units, a maximum load per unit of 40 kg must not be exceeded for reasons of stability!

The wall units can only be fitted on absolutely solid walls. Light masonry is not suitable for this purpose.

If (assembly) units are stacked on top of one another, a wall bracket must be ordered for each stacked unit.

For each project please remember to leave a 2.0 cm gap at the top to be able to mount units.

Maximum loads

Max. load of wooden and glass (fitted) shelves (up to 70.5 cm wide) and drawers: 25 kg Max. load of wooden and glass (fitted) shelves (between 70.5 and 105.7 cm wide): 15 kg Max. load of wooden and glass (fitted) shelves (from 105.7 cm wide): 10 kg

Max. load of cover shelves: 35 kg per metre length for floor units.

Please also note any maximum loads which may be stated in the type list for the individual units!

(23)

23

now! easy E 9. 2021

Labelling in type list drawings / assembly notes for wall units

The majority of units have two wall mounting points (= number of support boards), if these are to be fitted as wall units. This is not explicitly mentioned in the type list. If a different number of wall mounting points (= support boards) is required, this is marked in the drawings in the type list with numbers in black boxes. Every support board requires four mounting screws.

One assembly mortar set is sufficient for up to a maximum of 3 support boards or 4 wall side-panels.

Important note: Depending on the composition of the wall (see wall types illustrated above), assembly must be carried out using the special assembly mortar set and a standard cartridge applicator tool which are the basic essentials for safe and clean workmanship.

Important notes:

The composition of walls must be ascertained before concluding a contract and be checked by a qualified fitter before assembly takes place. Assembly may only be carried out by a qualified fitter under careful observation of the assembly instructions.

The plastic Rawl plugs supplied by hülsta as a standard set are only suitable for concrete ≥ C12/15, if the wall composition and compression strength corresponds to the table below. Under no circumstances must a unit be assembled on light masonry.

Furthermore, we provide a mounting set with assembly mortar for the types of walls listed below (see assembly mortar set below). Again, assembly must be carried out by a qualified fitter under careful observation of the wall composition and assembly instruction. The compression strength levels stated below must be met under all circumstances.

Assembly mortar set for up to a maximum of 3 support boards consisting of:

9x injection retaining sleeve 9x screw-in sleeve 1x injection cartridge 2x static mixer 1x assembly instructions

Please use the mounting screws from the standard set (supplied free of charge).

Mounting sets

Standard set

The standard set consists of 4 plastic Rawl plugs and 4 mounting screws and is sufficient for 1 support board. The standard sets are included in the packet of fittings to match the number of support boards.

= 3 support boards

= 4 support boards, etc.

Building bricks Mz 12

Compression strength ≥ 12 N/mm²

Limestone blocks KS 12 Compression strength ≥ 12 N/mm²

Perforated sand lime bricks KSL12 Compression strength ≥ 12 N/mm²

Vertically perforated bricks HLz 12 Compression strength ≥ 12 N/mm² Bulk density ≥ 1.0 kg/dm³ Concrete C12/15

Assembly mortar set only suitable for the materials stated below!

Standard set

Solid blocks of light concrete V2 Compression strength ≥ 2 N/mm²

Perforated blocks of light concrete Hbl 2 Compression strength ≥ 2 N/mm²

Aerated concrete PP2

Materials table

with a description of which sets are to be used with the following types of walls:

Example of order:

• Add up number of support boards for all existing unit types

• Divide the sum by “3”

• Round up the result to a full number

= Number of assembly mortar sets required

3 4

A different and more suitable type of mounting must be chosen by a qualified fitter in all other cases. hülsta cannot accept any responsibility for the choice of any other types of mounting! Please note that if the units are not mounted properly on the wall, there is a risk of the units falling down or tipping over – especially when alternative mounting materials acquired on site have been used. Generally speaking, you as a dealer/qualified fitter are responsible for the correct wall mounting of the units.

5555 -

(24)