• No results found

A Study of Aluminium 6082 & Brass 319 Materials by Friction Stir Welding Process

N/A
N/A
Protected

Academic year: 2020

Share "A Study of Aluminium 6082 & Brass 319 Materials by Friction Stir Welding Process"

Copied!
6
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

TABLE VI  PARAMETERS OF WELDING
Fig 3. Graph of Aluminium 6082 to 6082 at 900 Rpm.
TABLE X Hardness of   (Al-6082 to Al-6082)  Joint
TABLE XI Hardness of   (Br 319 to Br 319)  Joint

References

Related documents

Comparison of canagliflozin versus placebo and sitagliptin (study B): Lavalle-Gonzalez FJ, Januszewicz A, Davidson J, Tong C, Qiu R, Canovatchel W, Meininger G: Efficacy and

Because of the different morphological fea- tures of the cell walls, softwood (red pine and American pine) displays different tendencies from hardwood (white ash) in terms of

It has been observed that allowing unlimited compensation to meet the QoS requirements may lead to bogus channel information to gain resource allocations The compensation needs

The model assumes that, in some stage or stages of development, the male recombination elements cause a particular event that does not occur i n normal males and that this

o From the overall experimentation results and the cost analysis which was carried out, it can be observed that with the optimum cement content as the percentage of

Entity linking (EL) is an important subtask of named entity recognition. To address the Twitter entity linking problem, Guo et al [9] had proposed a structural

The input is the fundus image of Human retina where the generation of super pixel, optic cup and optic disk are used for the segmentation process is taking by using region