Key Engineering Materials Vol. 667
Advanced Engineering Materials and Processing Technologies
Collection of selected, peer reviewed papers from the special topic volume with invited peer reviewed papers only.The 95 papers are grouped as follows: Chapter 1: Research and Development of Technologies
and Tools for Material Processing;Chapter 2: Proper
Bearbeitet von Guanglin Wang
1. Auflage 2016. Buch. 616 S. Hardcover ISBN 978 3 03835 520 5
Weitere Fachgebiete > Technik > Werkstoffkunde, Mechanische Technologie
schnell und portofrei erhältlich bei
Die Online-Fachbuchhandlung beck-shop.de ist spezialisiert auf Fachbücher, insbesondere Recht, Steuern und Wirtschaft. Im Sortiment finden Sie alle Medien (Bücher, Zeitschriften, CDs, eBooks, etc.) aller Verlage. Ergänzt wird das Programm durch Services wie Neuerscheinungsdienst oder Zusammenstellungen von Büchern zu Sonderpreisen. Der Shop führt mehr
Table of Contents
Preface
Chapter 1: Research and Development of Technologies and Tools for
Material Processing
A New Method for Copper Spherical Surface Lathing with High Speed Steel Cutting Tool
Z.F. Chen and L. Zhang 3
Analysis of Vibration Amplitude in High-Speed Cutting for Hardened Steel
G.J. Chen, L. Wang, B.T. He, L.G. Kong and X.Q. Zhou 9
Application of Micro-Arc Oxidation Technology in Die Magnesium Alloy Wheels in Mass Production
Z.L. Zhang, Y.Q. Zhang, L. Zhang, A.Q. Pan and J. Liu 15
Analysis of 45 Steel Rectangular Thin-Walled Parts Milling Deformation
J. Li, Z.L. Wang, P. Xi and Y. Jiao 22
Basic Experiment of Ultrasonic Deep Rolling with Longitudinal-Torsional Vibration
J.X. Zheng, Y.L. Hou and P.M. Ming 29
Cutting Force in High-Speed Face Milling AISI H13 Steel
X.B. Cui, J.X. Guo and X.Y. Wang 35
Development of Nanomachining Mechanism Based on Molecular Dynamics Simulation
P.Y. Zhao, Y.B. Guo and G.K. Qu 41
Die Forming Simulation of PM Parts Based on AMESim
M.J. Zhang 47
Experimental Study on Laser Transmission Joining between PA66GF and AISI304
D.D. Meng, T. Jiang, H.X. Liu, X. Wang and Y.W. Wu 54
Experimental Study on Surface Quality in Milling Carbon Fiber Reinforced Plastics
J.D. Liu, Y.S. Li, G.H. Yan, L.K. Huang, X.F. Yang and D.M. Yu 62
Experimental Study on Ultrasonic Vibration-Assisted Scratch of SiCp/Al Composite
W. Zheng and M. Zhou 68
Global Stability Analysis on Combination Self-Excited Vibration of BTA Deep-Hole Boring Rotor Materials
W. Zhao, Z.Q. Hu and D. Huang 75
Hilbert Curve Fractal Stacking in the Application of Path Planning in the Molten Molding
Z.L. Wang, Y.Y. Chao and Y.J. Hu 82
Investigation on Cutting Force and Temperature of Cutting Cu50Zr50 Metallic Glass by Molecular Dynamics Simulation
Y. Zhao, X.L. Wei, Y. Zhang, F.H. Wu and D.H. Huo 88
Light Scattering of HDPE and LDPE in Laser Transmission Welding
X.J. Zhong, C.L. Fan, H.X. Liu, P. Li and X. Wang 95
MD Simulation and Optimization Analysis for Nanoscale Material Removal Process
G.K. Qu 102
MD Simulations of Nanomachining Monocrystalline Silicon
G.K. Qu 108
Optimization Design of Diamond Circular Saw-Blade with Discontinuous Cutting and Uneven Distribution for Cutting Thin-Walled Tubes
L.Z. Gu 114
Research and Modeling of Blades with Complex Surfaces Based on Laser Rapid Prototyping
Z.B. Yang, A.J. Liu and S. Liu 119
Test and Analysis of Electric Arc Machining Characteristics of Titanium Alloy and High-Temperature Alloy
H. Peng and Y. Zhai 123
Research on Surface Quality for CBN Grinding Wheel Based on “Speed Effect”
Simulation and Experiment Study on Cutting Temperature in Diamond Ultra-Precision Cutting of Aluminum Alloy Mirror
Y.J. Zhang, G.J. Dong and M. Zhou 136
Study on Influence Laws of Surface Roughness of Micro-Groove in Single Crystal Silicon under Diamond Fly-Cutting
Y.Y. Yan, R.X. Wang and B. Zhao 142
Research on Error Model of the Al5052 Sheet Stamping Forming Parts
L.Z. Gu, Y. Ma and Q. Deng 149
Test and Analysis of Low Temperature Air Cutting Performance to Difficult-to-Machine Materials
H. Peng and Y.F. Wang 155
The Experiment Investigation of the Tool Wear in Diamond Ultra-Precision Cutting of Aluminum Alloy Mirror
G.J. Dong, Y.J. Zhang and M. Zhou 162
The Influence of Welding Sequence on Welding Deformation of Sheet Metal Stamping
J.F. Shen, Y.J. He and Y.C. Yu 168
Dynamic Model of Material Removal Process in Through-Feed Centerless Grinding Based on the Lagrange Equation
C. Qi, S.J. Chen, H. Ding and K. Cheng 173
Effect of FDM Process on Adhesive Strength of Polylactic Acid(PLA) Filament
A.Q. Pan, Z.F. Huang, R.J. Guo and J. Liu 181
Heat Transfer Analysis on Aluminum-Polymer Composite Molding Process
S. Wang, X.P. Li, L.L. Bai and N.N. Gong 187
Material Plastic Side Flow and White Layer in Hardened Steel GCr15 Precision Turning
G.J. Chen, X.Q. Zhou, B.T. He, M. Ya, Z.H. Ba and X.L. Liu 194
Study on the Forming Accuracy and Density of Eucalyptus/PES Fabricated by Laser Sintering
Y.L. Guo, Y.Q. Yu and K.Y. Jiang 200
Study on the Laser Shock Processing with Square Spot of Titanium Alloy Based on ABAQUS
G.H. Li, H.J. Qi and Y.J. Cai 206
Study the Influence of Surface Treatment Technology to AZ31 Property Change
X. Yang, Z.S. Wang and S.W. Zhang 213
Temperature Field Simulation of Wood Powder/PES Composite Powder Material
Y.Q. Yu, Y.L. Guo and K.Y. Jiang 218
The Study of Finite Element Simulation for Cooling after Heating Process of Rail
F.Q. Yu and J. Wang 224
The Analysis of Tool Wear in Milling CFRP with Different Diamond Coated Tool
X.F. Yang, Y.S. Li, G.H. Yan, J.D. Liu and D.M. Yu 231
Finite Element Analysis of High Temperature Alloy Cutting Process Based on Abaqus
Y. Li and C.B. Cai 237
Thermal Stress Analysis of Powder Metallurgy Sintering Process Based on ANSYS
H. Qiu, Y.G. Zhu and L. Zhang 244
Study on the Preparation of Bamboo Plastic Composite Intend for Additive Manufacturing
D.X. Zhao, X. Cai, G.Z. Shou, Y.Q. Gu and P.X. Wang 250
Technical Study of Jet Electrodeposition in Manufacture of Metal Parts
H. Fan, Y.P. Zhao and S.K. Wang 259
Chapter 2: Properties of Materials
Dynamic Porosity of 3D Network SiC Ceramic as the Shock-Damping and Acoustic-Absorbing Material for Ultra-Precise Machine Laying
D. Huang, Y. Wang and W. Zhao 267
Electrical Contact Property of AuNi9/AuCuAgZn Sheet Tribo-Couple
T. Lei, Y.M. Gao, G.Y. Chen and H. Zhou 274
Electrochemical Characteristics of the Amorphous-Nanocrystal Ni–Mo Cathodes in Sodium Hydroxide Solution
b
Advanced Engineering Materials and Processing Technologies
Experimental and Modelling of Constitutive Equation of Polycarbonate Material
H.T. Liu, N. Chen and Y.Z. Sun 286
Finite Element Modeling and Simulation towards Metallic Microstructure of Titanium Alloy Based on Abaqus
H.Y. Wang, Y.F. Li and G.L. Wang 292
Infulence of Chemical Composition and Metallographic Structure to Dimagnetic Stainless Steel
Q.W. Zeng and Z.M. Zhang 298
Mixing Y89 Influence on Mechanical Properties of Casting Mg17Al12
H.S. Yang, S.J. Hao and J.J. Liang 303
Pyrolysis Kinetics of PA66/CB
D.H. Guo, X. Wang, H.R. Jiang, G.C. Chen, Z. Yan and H.X. Liu 308
Study on Characteristics of Green Parts of Birch Flour/Polyester Composite by Selective Laser Sintering
D.J. Zhao, Y.L. Guo, W.L. Song, Z. Hui and Z.X. Yu 314
Experimental Research on Selective Laser Sintering of Bamboo Flour/Polyamide Hot-Melt Adhensive Blend
D.J. Zhao, Y.L. Guo, W.L. Song, Z. Hui and Z.X. Yu 320
Finite Element Simulation and Experimental Study on Micro-Milling Cobalt-Based Alloy
P. Zhang, Y.L. Du, B. Wang and D.B. Shan 326
Chapter 3: Materials in Construction
Analysis of Durability Performance of Ionic Soil Stabilizer Improving Soil
Y.J. Wang, W.Y. Lin, Y.S. Huang, X. Qiu and J.H. Wu 335
Compressive Strength Analysis of Ionic Soil Stabilizer Improving Soil
J.Q. Tao, W.Y. Lin, X.H. Luo, X. Qiu and J.H. Wu 341
Detecting and Expressing of Asphalt Materials Modulus Considering Temperature Effect
X.H. Luo, Q. Yang, X. Qiu and S.L. Xiao 347
Fuzzy Comprehensive Evaluation for Road Base Material Selection Based on Analytic Hierarchy Process
X.Q. Huang, X. Qiu, L.W. Chen, J.H. Wu and X.H. Luo 353
Mechanics Mechanism Analysis of Asphalt-Aggregate Interface Damage
Q. Yang, S.L. Xiao, X. Qiu, X.H. Luo and Y.J. Wang 359
Mechanics Mechanism Analysis of Concrete Pavement Resonant Rubblization
P. Chen, X. Qiu, Q. Zhu and C.C. Ouyang 365
Micro-Treatment Mechanism Study on Ionic Soil Stabilizer Improving Clay
X.H. Luo, X. Qiu, Y.J. Wang, J.H. Wu and S.L. Xiao 370
Chapter 4: Measurements, Testing and Monitoring in Mechanical
Engineering
The Study of the Electrothermal Heating Pipe Membrane Resistance Test Equipment
X.L. Zhu, S.T. Deng, G. Li and Y.P. Li 379
Developing of the Experimental Device that Test Magneto Rheological Fluid(MRF) Shear Yield Stress Nnder Non Uniform Composite Field
W.Z. Chen, G. Zhang, X.S. He, S.Q. Ren and P. Huang 385
Development of a Chemiluminescence Detecting System Based on FPGA
A. Wu and J.H. Zhu 391
Diagnostic Testing on Crack Propagation of Asphalt Pavement Materials
G. Shen, X. Qiu, J.Q. Tao, N.D. Du and Y.J. Hu 396
Stress Analysis of Stepped Oblique End-Face Combined Concave Die Based on the Least Square Method
Z.P. Lyu, X.H. Ma, S.Z. Zhou and S.Z. Wei 402
Structure Damage Diagnostic Method of High-Flow Control Valve Stem
Key Engineering Materials Vol. 667
c
The Electrothermal Heating Tube Membrane Resistance Test Method Research
X.L. Zhu and G. Li 413
Design of the Auto-Stiffness Measuring Instrument for Electro Hydraulic Servo Valve Elastic Element
G.L. Wang, N. Yin and H.F. Wang 419
HLP Type Hydraulic Oil Analysis for Meso-Scale Hole Measurement
X. Zhang, Y. Hong, G.L. Wang, D.X. Shao and L. Sun 427
Advances in Skin Viscoelastic Detection Methods and Equipments
J.C. Sun, Y.L. Song and S.M. Gao 433
Development of the Jet Flow Testing System and the Influence of the Hydraulic Oil on the Jet Flow Quality
C.X. Bao 439
Spool Valve Hydraulic Measurement Flow Pattern Error Based on Variable Discharge Coefficient
Z. Lin 444
UCBO Hydraulic Oil and Application on Hydraulic Measurement for Laval Nozzle Throat Diameter
Y. Hong, X. Zhang, D.X. Shao, G.L. Wang and L. Sun 449
HLP Type Hydraulic Oil in Meso-Scale Hole Measuring
X. Zhang, G.L. Wang, D.X. Shao, Y. Hong and L. Sun 455
Chapter 5: Research and Design Machines and Units of Technological
Equipment
The Common 13Cr Steel RUL Forecast Model for Tri-High Gas Well Pipe
R. Wu, P.F. Chen and C.L. Lei 465
Design and Analysis of Paver Leveling Control System
J. Deng and Y. Li 470
Servo Valve Nozzle Fuzzy Clustering Analysis Pairing Algorithm
X.D. Pan, W.D. Zhu and G.L. Wang 476
Design of Hydraulic Locking Mechanism Based on Material Friction
W.D. Zhu, X.D. Pan, Y. Li and W.J. Huo 481
Motor Rotor Unit Composite Die Design and WEDM Programming of Stamping Dies (Convex-Concave Mould)
Y. Li, Y.W. Zou, W.D. Zhu, J. Deng and W.J. Huo 487
Simulation and Analysis of Passive Torque Servo System
C.C. Li, D.X. Shao and G.L. Wang 493
Design of the Energy-Saving Heater Based on Semiconductor Nano Electrothermal Film
J.K. Xu, J.B. Cao, J.X. Cao, F.C. Qiu, Q.H. Sun, S.J. E, H.T. Zhang and X.Z. Ding 500
Research on Reverse Design of Flexible Rod Based on CMM
W.M. Pan, G.H. Li, Y. Yu and N.N. Kong 506
Free Modal Analysis for the Pinion of Logarithmic Spiral Bevel Gear with 20CrMnTi
L.Z. Gu, T.M. Xiang, P. Li and J.M. Xu 512
Mechanical Analysis and Finite Element Simulation of Scissor Transmission Mechanism under Partial Load
J. Chen, X. Yuan and F. Zhang 518
Research on the Best Autofrettage Pressure of Ultra-High Pressure Valve Body
X.H. Ma 524
Research on Wheel-Shoe Wear for High Friction Composite Brake Shoes Based Foundation Brake Rigging in Railway Wagon
B.H. Lu, X.Y. Chen, B.Z. Qu and H.B. Zhang 530
Simulation and Experimental Research on Rubber Waveform Generator
T. Gao, Q.P. Liu, J.X. Ma and H.L. Guo 536
Study on Performances of Amorphous Three-Phase Asynchronous Motor
Q.T. Chen, X.P. Li, S. Wang and Y.F. Luo 542
Reliability Analysis of Double Derrick Based on Stress Analysis
d
Advanced Engineering Materials and Processing Technologies
A Hormone-Transmission Inspired Multi-Layer Embryonics Supporting Hierarchical Self-Healing
N.T. Wang, Y.L. Qian and Y. Li 555
Design of a Microwave Vacuum Drying Medicine Extract Model of Process Equipment
C.X. He, L.M. Zhang and X.D. Wang 562
Research on CNC of FSW with Serial-Parallel Structure Based on 3-PRS Mechanism
Y.G. Wei, Z.X. Wang, Q. Li and Y. Shi 568
Research on the Process of Ring-Involute Tooth Spherical Gear Based on Rapid Prototyping Processing
Z.F. Huang, Y.L. Ma, J.Q. Zhang, X.G. Zheng and J. Liu 575
Structure Optimization of the Aluminum Alloy Frames of Flight Simulator
J. Liu, P.G. Gui, J.M. Wang, Y. Yu and Z.H. Zhong 582
An Investigation on the Workpiece Roundness Generation in Centerless Grinding Based on the Integration of Virtual Machine Tool and Workpiece Material Removal Mechanism
Q. Cui, S.J. Chen, H. Ding and K. Cheng 588
The Construction of Dimensionless Nonlinear Dynamic Model and the Research on Chaotic Features of Vibration Cutting Based on Dynamic Fracture Mechanics
