• No results found

TRANSFORMER FAULT DETECTION USING DWT-DCT

N/A
N/A
Protected

Academic year: 2020

Share "TRANSFORMER FAULT DETECTION USING DWT-DCT"

Copied!
8
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1: The structure of electric power transmission and distribution system
Figure 8 shows that maximum energy is confined near 6000 samples. Above figures clearly depicts that filter db6 is best suitable for three phase fault detection

References

Related documents

This report presents a Discrete Wavelet Transform and Artificial Neural Network approach to fault detection and classification in transmission line faults.. The

Also the various diagnostic techniques have been discussed briefly out of which the Frequency Sweep Method is considered to be most sensitive in case of

This is the coding technique that we have used for our paper. In this method the signal is transformed into frequency domain and then only dominant feature of signal is maintained.

Transfer function of a system (in this case transformer) being dependent on frequency varies from its healthy signature and this variation detects occurrence of faults

The principle of frequency-domain energy detection is shown in Figure 3. Frequency-domain energy detection. Compared to the time-domain energy detection, fre- quency-domain

There are different types of fault in induction motor such as broken rotor bar fault, eccentricity fault etc but in this paper broken rotor bar fault is studied.. Electric drives

Also, some of the frequency domain methods have been adopted in face recognition such as Discrete Fourier Transform (DFT), Discrete Cosine Transform (DCT) and

The three faults cases like inter turn fault, turn to turn fault and change in ground capacitance are simulated and are compared with reference to unfault condition.