Polycom VVX 500 Touch Screen Phone Owner s Manual V.1

Plug the computer cable into a spare port on your router or switch. Connect the power supply unit into the nearest socket if not using PoE. The phone will power up and your

3 Use the long phone cable provided and connect the port labeled wall on the ooma Hub to the phone jack in the wall (not your DSL jack)..

3 Use the long phone cable provided and connect the port labeled wall on the ooma Hub to the phone jack in the wall (not your DSL jack)..

Connect an Ethernet cable from the High Speed Internet modem to the WAN port of the Home Phone Adapter.. Connect a second Ethernet cable from the LAN port of the Home Phone Adapter

Be sure to connect your PC via an Ethernet cable to the LAN port of the NationPhone Router & Phone Adapter.. Plug the power adapter into the NationPhone Router &

Connect the Internet Firewall to Your Network Connect an Ethernet cable to the Internet Firewall's LAN port.. Connect the other end to your

If you are doing this in a home environment (without wall ports), connect an Ethernet network cable between a LAN port on your upstream router and the Internet port on your

Connect one end of the Ethernet cable (straight-wired, see above) to the Ethernet port on the back of your computer, and the other end to the connector labeled “Ethernet” on the