Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com
FEATURES
Pressure regulator for inlet pressure up to 25 bar (362 psi)
Clamp connections DIN 32676 welded to the body:
1/2"; 3/4"; 1”; 1”1/2.
Outlet pressure is controlled by a piston. Electropolished body.
Ra 0,4 µm (16 µin) roughness on inside wetted surfaces.
Available the ATEX version. Brand II2GDcIICX.
For use in potentially explosive atmospheres zones: 1, 21, 2, 22 (not applicable in mines and zone 0).
The product complies with the directive 97/23/CE PED.
TRI CLAMP
PRESSURE REGULATORS
Stainless steel AISI 316L pressure regulators with clamp connections,
suitable for compressed air, gas and liquid
SPECIFICATIONS
1/2" and 3/4" pressure regulator weight ~1,56 Kg (~3,4 lb) 1" and 1”1/2 pressure regulator weight ~10,2 Kg (~22,5 lb)
Operating temperature: -40°C ÷ +175°C (-40 °F ÷ +347 °F) – Suitable for steam service Main valve leakage classification: VI (bubble tight)
Flow coefficient: Kv= 1,2 Nm³/h Cv = 1,4 US gal/min for 1/2” and 3/4" version Flow coefficient: Kv= 11 Nm³/h Cv = 12,8 US gal/min for 1” and 1”1/2 version Degree of protection: IP25
All metallic parts are machined from the solid bar. No threaded connections exposed to the fluid
MATERIALS
Body and bonnet: stainless steel AISI 316L Internal parts: stainless steel AISI 316L
Main valve spring: stainless steel AISI 302 (not in contact with the fluid) Adjusting spring: C85 nickel-plated NiP/Fe 15 μm (not in contact with the fluid)
Piston: stainless steel AISI 316L
Gaskets: EPDM or EPDM in accordance to FDA (other compounds available on request)
SPARE PARTS
2 3 4 5 6 7 8 9 O u tl e t p re ss u re [ b ar ]
1/2" TRI CLAMP REGULATOR
Pout 0,8÷8 bar Pin=10 bar Aria/air
flow charts
0 1 2 3 4 5 6 7 0 200 400 600 800 1000 1200 1400 1600 O u tl e t p re ss u re [ b ar ] Flow rate [Nm^3/h]1" TRI CLAMP REGULATOR
Pout 0,8÷8 bar - Pin=10 bar - Aria/Air
available model types
Regolatori di pressione con attacchi TRI-CLAMP
TRI-CLAMP Pressure regulators
Regolatori di pressione con attacchi tri-clamp in acciaio inox, idonei per aria compressa e gas tecnici non corrosivi e liquidi
Pressure regulators with tri-clamp connections, made of stainless steel, for compressed air and technical, non corrosive gases and liquids
Parti metalliche da lavorazione di barra-NO manometro / Metallic parts machined from solid bar-No gauge
TYPE PS bar P.Out bar INLET CLAMP OUTLET CLAMP GAUGE
CONNECTION CODE MEDIUM
TRI-CLAMP PRESSURE REGULATOR 1/2" 1/2" 3/4" 3/4" 1" 1" 1"1/2 1"1/2 1/2" 1/2" 3/4" 3/4" 1" 1" 1"1/2 1"1/2 1/2" 1/2" 3/4" 3/4" 1" 1" 1"1/2 1"1/2 On request No gauge connection On request No gauge connection On request
O-ring secondo FDA / O-ring according to FDA
25 0,3÷3
Pressione uscita pretarata / Pre-set outlet pressure
Pressione uscita tarata fissa, vite con dado cieco / Fixed outlet pressure, screw with cap nut
Sgrassato uso O2 / Degreased for O2
Convogliamento su campana / Connection for bonnet piping Stampigliatura su specifica del cliente / Not standard branding
Versione ATEX / ATEX version
Temperature diverse da standard / Special temperature range Versione Relieving / Relieving version
*
*
*
* Aria - N2 - He - Ar - H2 - CO2 - N2O - Liquidi
ESECUZIONI DIVERSE DA STANDARD / SPECIAL VERSIONS
3TCR2# TRI-CLAMP PRESSURE REGULATOR 25 0,8÷8 3TCR2# 0,2÷1,5 25 TRI-CLAMP PRESSURE REGULATOR 3TCR2# TRI-CLAMP PRESSURE REGULATOR No gauge connection
generating the product code
CODE COMPOSITION EXAMPLE
3TCR2#9E C1 D0 98 I0 00
3TCR2#: Pressure regulator clamp connection 9E: DIN 32676-1” connections
C1: maximum inlet pressure 25 bar D0: outlet pressure range 0,8-8 bar 98: EPDM gaskets
I0
00: No accessories
AA Attacchi / Connections 9E DIN32676-1" 9F DIN32676-1 1/2" BB Pressione ingresso / Inlet pressure C1 25 bar
CC Intervallo uscita - Outlet range A0 Pout 0,2÷1,5bar B0 Pout 0,3÷3bar D0 Pout 0,8÷8bar
DD Guarnizioni / Gaskets 98 EPDM
99 FPM
EE Marchiato / Marked I0 ID
FF Accessori / Accessories 00 Nessun accessorio
02 OR FPM,(-20+200)°C 16 O-Ring FDA
TRI CLAMP PRESSURE REGULATOR AISI 316 L AA BB CC DD EE FF
technical drawings (all dimensions in mm)
PRESSURE REGULATOR CLAMP CONNECTIONS 1" – 1”1/2"
L
~
3
2
6
I
N
O
U
T
~
7
5
129
IN/OUT
L
D
1"
~180 ±3
ø50.5
1"1/2
~182 ±3
ø50.5
~65
D
*For pipe connection when required, random orientation
technical drawings (all dimensions in mm)
PRESSURE REGULATOR CLAMP CONNECTIONS 1/2" – 3/4"
L
~
18
2
I
N
O
U
T
D
IN/OUT
L
D
1/2"
142±3
ø25
3/4"
139,4±3
ø25
83
~
5
7
~42
M
5
*
ID Insert Deal Srl
Strada dei Boschi, 40 20852 Villasanta (MB) Italia
tel. +39 039 302035
info@idinsertdeal.com www.idinsertdeal.com
ID Insert Deal si riserva il diritto di cambiare le specifiche del prodotto senza preavviso.
ID Insert Deal reserves the right to change and/or modify product specifications without prior notice.
Insert Deal non si assume alcuna responsabilità per la scelta, uso e manutenzione di qualsiasi prodotto. La responsabilità per l’idonea scelta, uso e manutenzione di qualsiasi prodotto ID rimane interamente a carico dell’acquirente.
Insert Deal does not assume responsibility for selection, use and maintenance of any products. Responsibility for proper selection, use and maintenance of any ID products remains entirely to the purchaser.
Riproduzione vietata. Tutti i diritti riservati; nessuna parte del presente documento può essere riprodotta senza autorizzazione di ID Insert Deal Srl. Reproduction forbidden. All rights reserved; the hereby document can’t be reproduced, also partially, without the authorization of ID Insert Deal Srl.
2^S-3TCR2 - REGOLATORI TRICLAMP_EN_01
Azienda con sistema di gestione qualità certificato.