CURRICULUM VITAE. Main Interests: Education: Experiences in academia: : 25 September 1951, Izmir, Turkey. : Kirikkale University,

(1)

CURRICULUM VITAE

Name : Ali ERISEN

Affiliation : Prof. Dr.

Birth date : 25 September 1951, Izmir, Turkey Marital status : Married and has two children Address : Kirikkale University,

Department of Mechanical Engineering Muhendislik Fakultesi

71451, Yahsihan, Kirikkale, Turkey GSM: +90 (535) 447 8402

Phone: +90 (318) 357 4242 / 1056 Fax: +90 (318) 357 2459

Email: [email protected], [email protected]

Web: http://www.kku.edu.tr/akademik/goster.php?sicilno=0214 Web: http://www.kku.edu.tr/~alierisen

Main

Interests:

General Areas:

Thermodynamics, Nuclear Engineering, Energy Conversion Systems, Thermo-Fluid, Engineering Mathematics

Special topics:

•

Heating, Refrigeration and Air Conditioning

•

Finite Elements Method

•

Hybrid Blanket Design

Education:

Degree University Department Year

Ph.D. Ege University, _{Izmir, Turkey} Department of _{Mechanical Engineering} 1978 M.Sc. Ege University, _{Izmir, Turkey} Department of _{Mechanical Engineering} 1974 B.Sc. Ege University, _{Izmir, Turkey} Department of _{Mechanical Engineering} 1972

(2)

Position University Year Professor Kirikkale University Department of Mechanical Engineering

Kirikkale, Turkey 1994 – current

Associate Professor Kirikkale University Department of Mechanical Engineering

Kirikkale, Turkey 1993 – 1994

Associate Professor Erciyes University Department of Mechanical Engineering

Kayseri, Turkey 1988 – 1993

Assistant Professor

Erciyes University

Department of Mechanical Engineering

Kayseri, Turkey 1986 – 1988

Assistant Professor Dokuz Eylul University Department of Mechanical Engineering

Izmir, Turkey 1982 – 1986

Research / Teaching Assistant

Ege University

Izmir, Turkey 1976 – 1982

Visiting Scientist MIT Plasma Fusion Center

Boston, USA 1980 – 1981

Research / Teaching Assistant

State Academiy for Engineering and Architecture

Eskisehir, Turkey 1974 – 1976

Experiences

in

administrative

duties:

Position University Year

Head of Department of Mechanical Engineering

Kirikkale University

Kirikkale, Turkey 2008 – 2011 Associate Dean of Engineering Faculty Kirikkale University Engineering Faculty Kirikkale, Turkey 2008 – 2011 Executive Member of Faculty Board Kirikkale University Engineering Faculty Kirikkale, Turkey 2008 – 2012 Executive Member of Faculty Board Kirikkale University Engineering Faculty Kirikkale, Turkey 1993 – 2004

(3)

Executive Member of University Board

Kirikkale University

Kirikkale, Turkey 1995 – 2003

Head of Graduate Program Kirikkale University Institute of Physical Sciences

Kirikkale, Turkey 1993 – 1997 Associate Dean of Engineering Faculty Kirikkale University Engineering Faculty Kirikkale, Turkey 1993 – 1997 Head of Energy Division

Erciyes University

Kayseri, Turkey 1990 – 1993

Head of Department of Mechanical Engineering

Erciyes University

Kayseri, Turkey 1990 – 1991

Associate Head of Graduate Program

Erciyes University

Institute of Physical Sciences

Kayseri, Turkey 1987 – 1990 Executive Member of Faculty Board Erciyes University Engineering Faculty Kayseri, Turkey 1986 – 1988 Associate Dean of Engineering Faculty Erciyes University Engineering Faculty Kayseri, Turkey 1986 – 1987 Executive Member of Institute Board Ege University

Institute of Nuclear Sciences

Izmir, Turkey 1985 – 1986

Executive Member of Faculty Board

Dokuz Eylul University Buca Faculty of Education

Izmir, Turkey 1983 – 1984

Laboratory Coordinator Ege University Faculty of Engineering Sciences Izmir, Turkey

1972 – 1974

Other

professional

experiences:

1.

Member of Editorial Board: 1996 – 2001

Mathematical & Computational Applications, Published by Association for Scientific Research, Turkey

2.

Member of Editorial Board: 2008 - current

Journal of the Institute of Physical Sciences, Erzincan University, Turkey

3.

Member of Project Review Board: 2008 - current

TUBITAK, The Scientific and Technological Research Council of Turkey

4.

Board Member for Academic Entitlement and Assignment to Assistant 1994 – current

Professorship, Associate Professorship, and Professorship:

YOK, The Council of Higher Education of Turkey

(4)

2013

National Boron Research Instute, Turkey

Engineering

software

packages

used:

Ansys, Fluent (Introductory level)

Reviewer:



Journal of Engineering Sciences, Pamukkale University, Turkey, 2004



Journal of the Institute of Science and Technology, Erciyes University, Turkey, 2003

Memberships:

•

TMMOB-MMO, Chamber of Mechanical Engineers, Turkey

Awards

/ Supports:



Financial support for participating in the researches as visiting scientist at MIT, Plasma Fusion Center, Boston, USA 1980 – 1981

Courses

taught:

Undergraduate courses: 1. Calculus

2.

Differential Equations

3.

Advanced Mathematics

4.

Finite Elements Method 5. Thermodynamics

6.

Gas Dynamics

7.

Heating. Refrigeration and Air Conditioning

8.

Mechanical Laboratory I (Heating, Refrigeration and Air Conditioning)

9.

Mechanical Laboratory II (Thermodynamics)

10.

Semester Project in Mechanical Engineering

11.

Graduation Project

Graduate courses:

1.

Advanced Engineering Mathematics

2.

Advanced Thermodynamics

3.

Fundamentals of Nuclear Engineering

4.

Energy Conversion Systems

(5)

Some

of

the

supervised

undergraduate

projects:

1.

Design of air conditioning system

2.

Design of domestic heating system

3.

Design of refrigeration unit

4.

Design of solar energy systems

5.

Design of wind energy systems

Supervised

Ph.D.

Thesis:

1.

Arslan, M., “Development of an Image Processing Tool for Non-Destructive Material Testing by Infrared Thermography”, Kirikkale University, Department of Mechanical Engineering, Kirikkale, Turkey, expected 2010.

2.

Cekel, N., “Thermal Analysis of Fin with Temperature Dependent Heat Conduction Coefficient”, Kirikkale University, Department of Mechanical Engineering, Kirikkale, Turkey, expected 2009.

3.

Ayata, T., “Neutronic Performance and Thermo-Hydraulic Analysis of Hybrid Reactors with Light

Water (H2O) and Heavy Water (D2O) Coolant”, Kirikkale University, Department of Mechanical Engineering, Kirikkale, Turkey, 2003.

4.

Arcaklioglu, E., “Thermodynamic Analysis of R12, R22, R502 Refrigerant Fluids and Their Alternative Mixtures in Refrigeration Systems”, Kirikkale University, Department of Mechanical Engineering, Kirikkale, Turkey, 2002.

5.

Gul, H., “Experimental Investigation with the Second Law of Thermodynamics of Heat Transfer in Pipes Having an Injected Spinning Water Flow at the Entrance”, Erciyes University, Department of Mechanical Engineering, Kayseri, Turkey, 1995.

6.

Ipek, O., “Neutronic Analysis of Geometrical and Material Parameters for D-T Driven Hybrid Blankets”, Erciyes University, Department of Mechanical Engineering, Kayseri, Turkey, 1992.

7.

Kocak, S., “Neutron-Physics Analysis of Hybrid Blankets Having Flattened Power Production and Fueled with ThO2+CmO2 Mixture”, Erciyes University, Department of Mechanical Engineering, Kayseri, Turkey, 1991.

Supervised

M.Sc.

Thesis:

1.

Arslan, E., “Vacuumed medium investigation for drying clothes“, Kirikkale University, Department of Mechanical Engineering, Kirikkale, Turkey, 2013.

2.

Terzi, S. O., ”Recovering of wasted steam in the production of gas concrete (autoclaved aerated concrete) by thermocomressor”, Kirikkale University, Department of Mechanical Engineering, Kirikkale, Turkey, 2011.

3.

Senol, S., ”Design and Manufacturing of Testing Device to Determine Pipe Roughness”, Kirikkale University, Department of Mechanical Engineering, Kirikkale, Turkey, 2005.

4.

Arslan, M., “Internet-Based Remote Temperature Control System”, Kirikkale University, Department of Mechanical Engineering, Kirikkale, Turkey, 2005.

(6)

5.

Terlemezoglu, N., ”Investigation of Laminar Natural Convection over a Vertical Plate Using Finite Difference Method”, Kirikkale University, Department of Mechanical Engineering, Kirikkale, Turkey, 2003.

6.

Celen, F., “Exergy Analysis in a Dry Rotary Burner with Pre-Calcinations in Cement Production Process in Bastas Company”, Kirikkale University, Department of Mechanical Engineering, Kirikkale, Turkey, 1998.

7.

Yilmaz, R., “Experimental Investigation of Performance Characteristics of Vapor Compression Refrigeration Units Using Refrigerant Mixture of R12-R22”, Kirikkale University, Department of Mechanical Engineering, Kirikkale, Turkey, 1997.

8.

Arcaklioglu, E., “Exergy Analysis of Performance of Refrigeration Unit Working with a Mixture of Propane-Isobutene by Utilizing Equation of State”, Kirikkale University, Department of Mechanical Engineering, Kirikkale, Turkey, 1997.

9.

Ayata, T., ”Computer-Aided Thermal Design of Buildings by Utilizing Graphical Input”, Kirikkale University, Department of Mechanical Engineering, Kirikkale, Turkey, 1997.

10.

Kelek, N., “Design of Optimum Solar Air Collector”, Erciyes University, Department of Mechanical Engineering, Kayseri, Turkey, 1995.

11.

Kaya, M., “Investigation of Refrigeration Plant Performance Criteria with Respect to Temperature Variation of Evaporator, Condenser and Environment”, Erciyes University, Department of Mechanical Engineering, Kayseri, Turkey, 1995.

12.

Dogan, A., “Investigation and Optimal Design of Heat Exchangers by Utilizing the Second Law of Thermodynamics”, Erciyes University, Department of Mechanical Engineering, Kayseri, Turkey, 1994.

13.

Akansu, S., “Design of Supersonic Wind Tunnel Facility for Normal Shock Waves”, Erciyes University, Department of Mechanical Engineering, Kayseri, Turkey, 1993.

14.

Onal, S., “Exergy Analysis of Combustion Efficiency for Steam Boilers”, Erciyes University, Department of Mechanical Engineering, Kayseri, Turkey, 1993.

15.

Saygi, H.,”Design of Supersonic Flow Nozzle”, Erciyes University, Department of Mechanical Engineering, Kayseri, Turkey, 1993.

16.

Ozcekic, M., “Availability Analysis Aided Redesign of Steam Distribution System of Paper Drying Cylinders in Package-Paper Production Plant”, Erciyes University, Department of Mechanical Engineering, Kayseri, Turkey, 1992.

17.

Ocal, C., “Numerical Computation of Nuclear Explosive Critical Masses for Various Reflector and Fuel Combinations and Computation of Neutron Physics Parameters in these Combinations”, Erciyes University, Department of Mechanical Engineering, Kayseri, Turkey, 1990.

18.

Unalan, S., “Computer-Aided Analysis of Optimum Storage Criteria in Thermal Heat Storage Unit Having Increased Inlet Temperature with Heat Pump”, Erciyes University, Department of Mechanical Engineering, Kayseri, Turkey, 1989.

PUBLICATIONS

Thesis:

1.

Erisen, A., 1978, “Controlling the Thermionic Space Reactors with U-233 as Nuclear Fuel and ZrH1.7 as Moderator by the Boron Reflector Drums”, Ph.D. Thesis, Department of Mechanical Engineering, Ege University, Izmir, Turkey

(7)

Thesis, Department of Mechanical Engineering, Ege University, Izmir, Turkey

Journal

papers:

1.

Arcaklioglu, E., Cavusoglu, A., and Erisen, A., 2006, “Thermodynamic Analysis of Refrigerant Mixtures for Possible Replacements for CFCs by an Algorithm Compiling Property Data”, Applied Thermal Engineering, Vol. 26, No: 4, pp. 430-439 (Times cited: 2)

2.

Arcaklioglu, E., Cavusoglu, A., and Erisen, A., 2005, “An Algorithmic Approach towards Finding Better Refrigerant Substitutes of CFCs in Terms of the Second Law of Thermodynamics”, Energy Conversion and Management, Vol. 46, No: 9-10, pp. 1595-1611 (Times cited: 2)

3.

Sozen, A., Arcaklioglu, E., Erisen, A., and Akcayol, M. A., 2004, “Performance Prediction of a Vapour-Compression Heat-Pump”, Applied Energy, Vol. 79, No: 3, pp. 327-344 (Times cited: 2)

4.

Arcaklioglu, E., Erisen, A., and Yilmaz, R., 2004, “Artificial Neural Network Analysis of Heat Pumps

Using Refrigerant Mixtures”, Energy Conversion and Management, Vol. 45, No: 11-12, pp. 1917-1929 (Times cited: 11)

5.

Arcaklioglu, E., Cavusoglu, A., and Erisen, A., 2004, “Thermodynamic Analysis of Refrigerant Mixtures Using Artificial Neural Networks”, Applied Energy, Vol. 78, No: 2, pp. 219–230 (Times cited: 8)

6.

Camdali, U., Erisen, A., and Celen, M., 2004, “Energy and Exergy Analyses in a Rotary Burner with

Pre-Calcinations in Cement Production”, Energy Conversion and Management, Vol. 45, No: 18-19, pp. 3017-3031 (Times cited: 4)

7.

Unalan, S., Ayata, T., Akansu, S. O., Erisen, A., and Bolukbasi, A., 2003, “Light and Heavy Water Cooled Hybrid Reactors for Rejuvenation of LWR Spent Fuels”, Energy Conversion and Management, Vol. 44, No: 16, pp. 2567-2587 (Times cited: 5)

8.

Yapici, H., Ipek, O., Ozceylan, V., and Erisen, A., 2000, “Analysis of the Rejuvenation Performance of Hybrid Blankets by Using Uranium Fuels (UN, UC, UO2, U3Si2) and Different Coolants for Various Volume Fraction”, Annals of Nuclear Energy, Vol. 27, No: 4, pp. 279-294 (Times cited: 17)

9.

Sahin, S., Erisen, A., and Cebi, Y., 1989, “Realization of a Flat Fission Power-Density in a Hybrid Blanket over Long Operation Periods”, Fusion Technology, Vol. 15, No. 1, pp. 37-48 (Times cited: 20)

10.

Sahin, S., Erisen, A., Selvi, S., and Yalcin, S., 1980, “Investigation of the Protection Possibilities

Against Enhanced Radiation Warhead”, Atomkernenergie-Kerntechnik, Vol. 35, No. 3, pp. 175-178 (Times cited: 11)

11.

Sahin, S., and Erisen, A., 1978, “Investigation of the Suitability of the Reflector Drums as Control Mechanism for Thermionic Reactors in Space Crafts with U-233 as Fuel and ZrH1.7 as Moderator”, Annals of Nuclear Energy, Vol. 5, No: 3-4, pp. 107-116

12.

Sahin, S., Erisen, A., Selvi, S., and Yalcin, S., 1979, “Reflector Drums as Control Mechanism for Compact Thermionic SpaceCraft Reactors with U-233 as Fuel”, Nuclear Energy-Journal of The British Nuclear Energy Society, Vol. 18, No: 6, pp. 401-408 (Times cited: 4)

International

conference

papers:

1.

Arslan, M., and Erisen, A., 2010, “Temperature distribution and non-destructive testing of a damaged material via infrared thermography and image processing technics”, 6th International Science and Technology Conference-2010 Proceedings Book, pp.344-350, Turkish Republic of Northern Cyprus

2.

Arslan, M., and Erisen, A., 2006, “Basic Problems and Solution Proposals in Web-Based Laboratories

(8)

pp. 136-142, April 2006, Famagusta/North Cyprus

3.

Ayata, T., Erisen, A., and Cavusoglu, A., 2006, “Obtaining Irregular Flat Temperature Distribution at One Face of Thin Cylindrical Plates in the Case of Irregularly Heated Opposite Face Using Finite Element Analysis”, 9th_{International Combustion Symposium, Kirikkale, Turkey, pp. 537-545, November 16-17,} 2006

4.

Arslan M., and Erisen A., 2005, “Internet-Based Temperature Control System”, International Congress on Information Technology in Agriculture, Food and Environment (ITAFE05), pp. 41-47, 12-14 October 2005, Adana, Turkey

5.

Arslan, M., and Erisen, A., 2005, “Virtual Laboratories in Distance Engineering Education and Remote Access Virtual Laboratory Samples Designed by Developed Model with Application: E-Control Laboratory and Remote Access Thermodynamics Laboratory", Fifth International Educational Technology Conference (IETC 2005), 21-23 September 2005, Sakarya, Turkey

6.

Uzun, I., and Erisen, A., 1997, ”Laminar Forced Convection Heat Transfer of a Non-Newtonian Fluid in Arbitrary Cross-Sectional Ducts”, ICHMT, International Symposium on Advances in Computational Heat Transfer, Cesme, Turkey, 26-30 May 1997

7.

Ipek, O., and Erisen, A., 1996, ”Importance of the Hybrid Reactor System in Terms of Safety, Environment, Waste Recycling and Energy Production”, Proceeding of The First Trabzon International Energy and Environment Symposium, Karadeniz Technical University, Trabzon Turkey, pp.261-267, July 29-31 1996

8.

Ipek, O., and Erisen, A., 1995, ”Hybrid-Blanket System”, The Second International Conference on New Energy Systems and Conversion, pp. 463-474, 31 July – 3 August 1995

9.

Ipek, O., and Erisen, A., 1995, ”The Effect of Fission and Nuclear Energy Production Systems on the Energy Usage and Environmental Aspects”, 10th_{International Thermal Science and Technology Congress,} Ankara, 6-8 September 1995

10.

Sahin, S., Erisen, A., and Cebi, Y., 1987, “A 244CmO2/nat.-UO2 Hybrid Blanket with Flat Fission Power Production”, Transactions, American Nuclear Society, Vol. 57, pp. 303

11.

Erisen, A., 1987, ”Design Calculations of A Cylindrical D-T Driven UO2 Hybrid Blanket”, 8th Miami International Conference on Alternative Energy Sources, 14-16 December 1987, Miami Beach, Florida, Vol. 2, pp. 55-64

12.

Sahin, S., Erisen, A., and Cebi, Y., 1987, “A Fast Hybrid Blanket with Flat Fission Power Over a Long Operational Period”, Transactions, American Nuclear Society, Vol. 54, pp. 134

13.

Sahin, S., Erisen, A., Selvi, S., and Yalcin, S., 1980, “Limited Protection Against Enhanced Radiation Warhead”, Abstract in Helvetica, Physica Acta, Vol. 52, No. 3, pp. 394, (Reunion de Printemps de la Societe Suisse de Physique, Basel, 5-6 April 1979)

National

journal

papers:

1.

Arslan, M., Atabas, I, Erisen, A., and Uzun, I., 2008, “Impact of Internet on System Performance in Web-Based Control Applications”, Automation Journal, Volume: 150, pp. 24-26, March 2008, Alternative Publishing, ISSN: 1304-631456, Turkey.

2.

Arslan, M., Atabas, I, and Erisen, A., 2007, “Internet-Originated Basic Problems and Their Solution Suggestions for Web-Based Control Applications”, Automation Journal, Volume: 129, pp. 74-78, October 2007, Alternative Publishing, ISSN: 1304-631456, Turkey.

3.

Arcaklioglu, E., and Erisen, A., 2003, “Thermodynamics Analysis of Vapor Compression Refrigeration System Using Refrigerant Mixtures", Journal of Engineering Science, Volume 9, No:2

(9)

4.

Arcaklioglu, E., and Erisen, A., 2002, “Exergy Analysis of Vapor Compression Refrigeration System Using a Refrigerants R12, R22, R502 and Alternative Mixture of Them", Technology, Issue 3-4, pp. 55-64

5.

Kocak, S., and Erisen, A., 2002, “Neutron Analysis of Hybrid Blankets with Flattened Power Production and ThO2+CmO2 Nuclear Fuel Mixture”, Dokuz Eylul University, Engineering Faculty, Journal of Science and Engineering, Volume 4, No: 3, pp. 137-158

6.

Camdalı, U., Celen, F., and Erisen, A., 2000, “Thermodynamics Analyses of a Dry System Rotary Burner with Pre-Calcinations in Cement Production”, Journal of Thermodynamics, Vol. 157, pp. 71-80

7.

Ipek, O., and Erisen, A., 1995, “Effects of Using Be and Pb as Neutron Multiplier on Neutronic Performance of Hybrid Blankets with UO2 Nuclear Fuel and C Reflector", Journal of Mechanical Engineering, Suleyman Demirel University, Faculty of Engineering and Architecture, Isparta, pp. 109-122

8.

Erisen, A., Ipek, O., Ocal, C., and Kocak, S., 1993, “Neutron-Physics Analysis of a Plutonium Based

Nuclear Fuel Medium in Terms of Critical Mass and Reflector Effectiveness", Isparta Engineering Faculty, Mechanical Engineering Journal, Vol. 7

National

conference

papers:

1. Çetin, M., Erisen, A., Tanndıroğlu, A., “Artificial drying of fresh hazelnuts in the rotating horizontal cylindirical dryers”, 17th_{National Thermal Science and Technology Congress, 224-27 June, 2009, Sivas.} 2. Arslan, M., Atabas, I, and Erisen, A., 2007, “Impact Investigation of Internet on System Performance in

Web-Based Control Applications”, Academic Informatics Conference (AB'07), pp. 63, 31 January-2 February 2007, Kutahya, Turkey

3. Arslan, M., Atabas, I., and Erisen, A., 2006, “Internet-Originated Basic Problems and Their Solution Suggestions for Web-Based Control Applications”, IV. Congress of Information Technology-Academic Informatics Conference (AB'06), pp. 349-352, 9-11 February 2006, Denizli

4. Aslan, M., Atabas, I., Erişen, A., and Uzun, I., 2005, “Remote Access Control Laboratory Applications", 2nd National Symposium on Education in Electrical-Electronic and Computer Engineering, pp. 114-119, 25-27 May, 2005, Samsun

5. Erisen, A., and Ayata, T., 2000, “Investigation of Flow and Temperature Distributions Depending on Exit Flow Position in a Naturally Ventilated Environment”, Figes 5th Users Meeting Proceedings, 19-22 October 2000

6. Erisen, A., Ayata, T., and Uzun, I., 2000, “Investigation of Temperature Distribution over Non- Heated Surface of a Cylindrical Slab Exposed to a Non-Uniform Temperature Distribution at the Other Surface", SIMER 2000, 6th National Refrigeration and Air Conditioning Technology Congress, pp. 131-137, April 2000

7. Uzun, I., Erisen, A., and Ayata, T., 2000, “Effects of Fin Shape on Performance of Concentrically Finned Heat Exchangers”, SIMER 2000, 6th National Refrigeration and Air Conditioning Technology Congress, pp. 124-130, April 2000

8. Erisen, A., Arcaklioglu, E., and Yılmaz, R., 2000, “Experimental Investigation of Performance Characteristics of Vapor Compression Refrigeration Units Using Mixtures of R12-R22 Refrigerant Fluid ", 6th National Congress of Refrigeration and Air Conditioning Technology, pp. 173, Cukurova University, Adana, 2000

9. Erisen, A., Arcaklioglu, E., and Yilmaz, R., 1998, ”Obtaining Liquid-Vapor Equilibrium of Propane-Isobutene and R12-R22 Refrigeration Fluid Mixtures by Using State Equation of Redlich-Kwong-Soave", 5th_National Refrigeration and Air Conditioning Technical Congress, pp. 148, Adana, 2-3 April 1998

10. Erisen, A., and Arcaklioglu, E., 1997, ”2nd_{Law Analysis of System Performance of Refrigeration Cycles} Using Propane-Isobutene Mixtures at Various Mass Ratios", 11th_{National Thermal Science and} Technology Congress, Edirne, 17-19 September 1997.

(10)

IXth Engineering Symposium, Süleyman Demirel University Engineering and Architecture Faculty, Isparta, pp. 125-131, 29-31 May, 1996.

12. Erisen, A., and Kaya, M., 1995, ”Investigation of Performance Criteria Variation of Refrigeration Plant Defined by First and Second Law Analyses with Respect to Temperature Variation of Evaporator, Condenser and Environment”, 10th_{National Thermal Science and Technology Congress, Ankara, 6-8} September, 1995.

13. Erisen, A., Ozcekic, M., and Onal, S., 1993, ”Redesign of Steam Distribution System of Drying Cylinders in a Paper Production Factory by using Availability Analysis”, Thermal Science and Technology, 9th_National Congress, Proceedings Book, Vol. 1, pp. 283-295, 20-22 September 1993.

14. Erisen, A., and Onal, S., 1993, ” Combustion Efficiency of a Boiler Depending on Fuel Flow Rate by using Exergy Analysis", Thermal Science and Technology, 9th_{National Congress, Proceedings Book, Vol. 1, pp.} 89-97, 20-22 September 1993.

15. Erisen, A., Ocal, C., Ipek, O., and Kocak, S., 1992, “Neutron-Physics Analysis of Plutonium Based Nuclear Fuel Medium in terms of Mass and Reflector Effectiveness", Akdeniz University, Isparta Engineering Faculty, 7th Engineering Week, May 25-29 1992.

16.Erisen, A., Ocal, C., Ipek, O., and Kocak, S., 1991, “Neutron-Physics Analysis of Plutonium Based Nuclear Fuel Medium with Uranium Reflector”, Energy Management Economy Congress Proceedings Book, pp. 355, 29-31 May 1991.

17. Erisen, A., Yapici, H, and Koc, A., 1987, ”Computer-Aided Computation of Steady State Temperature Distribution in a Sphere", 6th_{National Thermal Science and Technology Congress, 21-23 September, 1987} 18. Erisen, A., Yapici, H., and Kocak, S., 1987, ”Calculation of Stress Distribution at an Elastic Layer

Connected to a Rigid Base and Subjected to Two District Pressure Load by using Fourier Transform", XI. National Operational Research Conference, 23-25 September, 1987.

19. Erisen, A., Yapici, H., and Kocak, S., 1987, ” Investigation of a Flux Distribution in a D-T Driven Hybrid Blanket with Flattened Power Generation", 6th_{National Thermal Science and Technology Congress, 23-25} September 1987.

20. Erisen, A., 1985, “The Use of a Multi-Layered Shield Made of Different Materials in the Radiation Protection Against Strong Neutron Flux”, 1st_{National University-Industry Collaboration Symposium,} Kayseri.