• No results found

Static analysis of lattice columns

N/A
N/A
Protected

Academic year: 2020

Share "Static analysis of lattice columns"

Copied!
13
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1  Analysed lattice column with N-truss
Table 1  Static values used in the analysis of columns. Standards EN 338 [2], EN 12369-2 [3], EN 12369-1 [4]
Table 3  Analysis of load-bearing capacity of columns N-truss λef = 50
Table 6  Analysis of load-bearing capacity of columns V-truss λef = 30
+3

References

Related documents

Of the four conditions in the task, two required only a single comparison between either numerators or denomi- nators. We took high accuracy on both of these conditions as an

Such a collegiate cul- ture, like honors cultures everywhere, is best achieved by open and trusting relationships of the students with each other and the instructor, discussions

/ L, and a different adsorbent mass, is shown in Figure 5. The results obtained show that the removal rate increases quickly at first, until a time of 60 min, and

more ‘traditional’ contexts – distinctive patterns of alliance have become quite apparent around the issue of conflict diamonds in West Africa (and Angola): African states like

As noted in the Literature Review, above, scholarship on the determinants of foreign direct investment (FDI) variously argue the influence of GDP growth, the openness of a

The purpose of this research is to know the effect of giving Strychnine bush extract to the dosage to get the dose of songga extract of wood which is effective to give the

Socket address structure for the client ’s control ’ s control