• No results found

The creation of the UTS Social Impact Framework: A collaborative approach for transformational change

N/A
N/A
Protected

Academic year: 2020

Share "The creation of the UTS Social Impact Framework: A collaborative approach for transformational change"

Copied!
22
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1 Across three separate meetings, Advisory Group members interviewed each other to uncover stories of social impact at its best at UTS and their enabling factors.
Figure 2 Making sense of the data gathered through the initial Advisory Group meetings.
Table 1 Five categories as descriptive representations, alongside supporting quotes
Table 1 continued
+4

References

Related documents

The instrument contained 13 attitudinal statements related to the newsletter received, measured on a seven-point Likert scale: reactions to the site (newsletter frequency, drop

For the poorest farmers in eastern India, then, the benefits of groundwater irrigation have come through three routes: in large part, through purchased pump irrigation and, in a

The simulation corresponding to the second scenario, which enhances vertical heat transport via high-permeability conduits, shows three upflow zones sustained by the basal heat

These authors show for the case of location parameters in general non-regular models that a maximum bound on the convergence rate of parametric estimators can be deduced from

Frederick Banting and Charles Best extracted insulin from bovine pancreas in 1922, who received the Nobel Prize for their contribution in Medical field with John

Because of the importance and sensitivity of CA1 area of hippocampus and the pathophysiological mechanisms of cerebral ischemia, this study provided the novel thera- peutic window

Abstract Objective: To assess the effects of radial shockwave therapy (RSWT) on shoulder function, pain, range of motion (ROM), and strength in patients with chronic rotator

According to the Clinical Laboratories Improvement Amendment (CLIA) guidelines, the acceptable difference range of two measurements is up to 4 mol/L for sodium and