• No results found

Analysis of Detector-Source Distance and Detector Bias Voltage for Time Resolution of Plastic Scintillation Detectors

N/A
N/A
Protected

Academic year: 2020

Share "Analysis of Detector-Source Distance and Detector Bias Voltage for Time Resolution of Plastic Scintillation Detectors"

Copied!
5
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1.  Block diagram of the used spectrometer
Figure 3.  Time calibration graph (fitted time calibration=195.3125 ± 0.0051 ps/ch)

References

Related documents

In this paper, we examine the impact of wireless communication cum GSM on the economic lives of the Nigerian rural users, specifically, on the area of employment creation

As will be detailed in later sections, the main design challenges will be to handle the enormous on- and off-chip data rates, to provide efficient and low-mass module cooling to

Colored composites were characterized by XRF for the chemical composition of inorganic pigments, SEM observations, Mercury Intrusion Porosimetry (MPI) and

The person using the bridge looks at the signal present at the detector (the detector could be a lock-in amplifier, a tuned voltage detector, a current detector, or an ordinary

The axle or differential ratio refers to the number of times the speed of the driveshaft is reduced by the ring gear and pinion?. It compares the speed of the driveshaft to the

This conclusion is further supported by the following observations: (i) constitutive expression of stdE and stdF in a Dam + background represses SPI-1 expression (Figure 5); (ii)

That the Newark Housing Authority Board of Commissioners authorizes the Executive Director to execute a contract, and make any necessary corrections, with National Union Insurance

Several light sources will be placed in the JEM-EUSO instrument to monitor the efficiency and the detector gain.. That measurement will be performed in the daylight segments of the