• No results found

Drying Shrinkage Strain Development of Agro-Waste Oil Palm Shell Lightweight Aggregate Concrete by Using the Experimental Result, ACI and Eurocode Prediction Models

N/A
N/A
Protected

Academic year: 2020

Share "Drying Shrinkage Strain Development of Agro-Waste Oil Palm Shell Lightweight Aggregate Concrete by Using the Experimental Result, ACI and Eurocode Prediction Models"

Copied!
9
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 1. Physical properties of the aggregates
Fig. 3. Pre-drilled stainless steel discs (DEMEC pints)
Table 4 - Factors for prediction of drying shrinkage
Fig. 5 - Development and comparison of the drying shrinkage for C1 and C2 mixes with ACI-209R model [21]
+2

References

Related documents

In addition to presenting a brief note about proportion in Islamic architecture, the attempt is also made to shed some light on the roots of the application of golden section

Additionally, MTT assay was conducted to detect the targeting and pH-responsiveness of SPCs- and TSPCs- based self-assemblies in vitro, the results indicated that

Further studies are required to investigate the performance of snow depth change mapping using similar UAV data in terms of sensitivity to changes in key point sampling den- sity due

If every strong identity in a strong variety of partial algebras is satisfied as a strong hyperidentity, the strong variety is called solid.. In this paper, we consider the

There is necessary at derivation of milk FPD discrimination limit to take various factors into account as (in groups): 1) season variations; estimated state of dairy cow nutrition

The research question for the present study was: ‘Is the recording of patient data and the achievement of quality indicator targets satisfactory in rural Italy,

Learning Objectives:  Students will have studied the effects of sewage inlets on the water management as well as gained understanding of procedures for wastewater treatment

Program NLIN-CUR·ED (a nonlinear regression program with emphasis on the curvature and experimental design) is designed to facilitate" the choice of design points for experiments