• No results found

On the Use of Acoustic Emission to Assess the Wear in a Tribosystem

N/A
N/A
Protected

Academic year: 2020

Share "On the Use of Acoustic Emission to Assess the Wear in a Tribosystem"

Copied!
11
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

TABLE I. PARAMETERS OF TRIBOLOGICAL TESTS. Unit N
Figure 2 shows the course of the friction coefficient and linear wear as a function  of sliding distance for tribological tests marked in Table 2 as Test 1 and Test 2
Figure 2. The friction coefficient and linear wear in tribological tests: a) Test 1, b) Test 2
Figure 3. The friction coefficient and linear wear in tribological tests: a) Test 3, b) Test 4
+4

References

Related documents

For establishments that reported or imputed occupational employment totals but did not report an employment distribution across the wage intervals, a variation of mean imputation

Silver nanoparticles were prepared in aqueous AgNO 3 solution by using contact non- equilibrium low-temperature plasma and trisodium citrate as capping agent..

engineer can concentrate well on requirement gathering process. The collected requirement would help to make the fulfilled software. If any mismatch happened is

The concurrent effects of a fast national growth rate, of a large and dense residential area and a pressing demand for urban environmental protection create

Pithawalla College Of Eng... Institute

Results of the survey are categorized into the following four areas: primary method used to conduct student evaluations, Internet collection of student evaluation data,

innovation in payment systems, in particular the infrastructure used to operate payment systems, in the interests of service-users 3.. to ensure that payment systems

This essay asserts that to effectively degrade and ultimately destroy the Islamic State of Iraq and Syria (ISIS), and to topple the Bashar al-Assad’s regime, the international