PLM CUSTOMER TRAINING CATALOGUE

PLM

CUSTOMER

TRAINING

CATALOGUE

Welcome to the New Holland PLM™ _{Academy Training Catalogue!}

In the following pages, you will find a comprehensive offering of training courses designed to provide you with the knowledge and tools to get the most out of your PLM™ _investment.

You already know that your New Holland PLM precision farming system is an industry -leading solution, engineered for best-in-class performance and developed with input and feedback from customers around the world. And you have the peace of mind that comes from knowing you have the support of a dedicated team of service technicians and customer support representatives, trained to help you resolve any issue, any time. With a growing network of Precision Farming Certified dealers nationwide, New Holland is uniquely positioned to meet your every precision farming need.

While the PLM system has gained a reputation for being intuitive and easy to understand for even the newcomer to precision ag, we understand that you want to maximize the return on your investment, and this includes learning to use your existing equipment to its full potential. The PLM Academy has been created specifically to help you accomplish this goal, whether you just bought your first PLM system, or you’re an experienced user looking to go even deeper! For example:

• Sure, your PLM™ _{IntelliSteer system can drive straight lines, but did you know you can}

record a straight line (for the field interior) and a curve (your headland passes) at the same time?

• Or did you know your IntelliRate™ _{system can not only control application rates on}

planters, seeders, sprayers, and spreaders, but can also handle automatic section control (for up to 48 sections!) at the same time?

• Did you know your PLM combine yield monitor can estimate the crop volume remaining in the field, so you can make sure you have enough trucks on hand to haul it away? So, as you browse through the course offerings in the following pages, ask yourself: what else could I be doing, if only I knew how?

You may choose to enroll in an online course, where you can learn at your own pace in the privacy and comfort of your living room. Or talk to your local New Holland dealer about scheduling an instructor-led training session, where you’ll benefit from the experience of your dealer’s Precision Farming Specialist and/or expert PLM trainers, in a dynamic and hands-on small-group environment! Whatever training method you choose, you’ll be sure to walk away from the training with new information you can put to good use to maximize the efficiency and potential of your own operation.

We know you have many choices when it comes to precision farming equipment, and we appreciate your investment in New Holland PLM. We hope you’ll find the PLM Academy provides the resources you need to take your agribusiness to the next level, and, as always, we welcome your comments and suggestions as we continue to shape the Academy to meet the ever-evolving needs of today’s precision farmer.

GETTING STARTED WITH EZ-PILOT 7

GETTING STARTED WITH EZ-STEER 8

AUTOPILOT AUTOGUIDANCE™ ₈

IMPLEMENT CONTROL: TRUEGUIDE 9

IMPLEMENT CONTROL: TRUETRACKER 9

NEW HOLLAND INTELLISTEER™ _{AUTOMATIC STEERING SYSTEM 11}

NEW HOLLAND INTELLIVIEW™ _{COLOUR DISPLAYS 12}

AFTERMARKET DISPLAYS 12

NEW HOLLAND YIELD MONITORING 13

NEW HOLLAND ROW GUIDANCE SYSTEM 14

NEW HOLLAND PLM™ _{CONNECT TELEMATICS 16}

FIELD-IQ™ _{CROP INPUT CONTROL SYSTEM - PLANTING & MULTIPRODUCT 21}

FIELD-IQ™ _{CROP INPUT CONTROL SYSTEM - SPRAYING, 21}

SPREADING, & STRIPTILL/ANHYDROUS

PLM™ _{WATER CONTROL LEVELING SOLUTION - Level I 23}

PLM™ _{WATER CONTROL - DRAIN DRAINAGE SOLUTION - Level I 23}

WEB COURSE

Book at and launch the web course via the PLM Academy.

TITLE PAGE

INTRODUCTION TO GPS 6

EZ-PILOT INSTALLATION AND CALIBRATION 7

NEW HOLLAND AUTOMATED STEERING SYSTEMS 10

DISPLAYS 13

RG – 100 ROW GUIDANCE 14

PRECISION HARVESTING SYSTEM 15

PLM™ _{CONNECT TELEMATICS 16}

NEW HOLLAND PLM™ _{APPLICATION CONTROL SYSTEMS 17}

PLM™ _{WATER CONTROL 22}

INTRODUCTION TO PLM™ _{DESKTOP SOFTWARE 22}

WEB COURSE

TITLE PAGE

Throughout this catalogue, please look for the icon that is shown with each course.

The tractor icon indicates Instructor-Led Training (face-to-face);

INSTRUCTOR-LED TRAINING (ILT)

GETTING STARTED WITH EZ-PILOT 7

GETTING STARTED WITH EZ-STEER 8

AUTOPILOT AUTOGUIDANCE™ ₈

IMPLEMENT CONTROL: TRUEGUIDE 9

IMPLEMENT CONTROL: TRUETRACKER 9

NEW HOLLAND INTELLISTEER™ _{AUTOMATIC STEERING SYSTEM 11}

NEW HOLLAND INTELLIVIEW™ _{COLOUR DISPLAYS 12}

AFTERMARKET DISPLAYS 12

NEW HOLLAND YIELD MONITORING 13

NEW HOLLAND ROW GUIDANCE SYSTEM 14

NEW HOLLAND PLM™ _{CONNECT TELEMATICS 16}

FIELD-IQ™ _{CROP INPUT CONTROL SYSTEM - PLANTING & MULTIPRODUCT 21}

FIELD-IQ™ _{CROP INPUT CONTROL SYSTEM - SPRAYING, 21}

SPREADING, & STRIPTILL/ANHYDROUS

PLM™ _{WATER CONTROL LEVELING SOLUTION - Level I 23}

PLM™ _{WATER CONTROL - DRAIN DRAINAGE SOLUTION - Level I 23}

INSTRUCTOR-LED TRAINING (ILT)

Instructor-led activities with theoretical and practical application of the course content. ILT offers a practical approach with the opportunity to also ask questions.

TITLE PAGE

TITLE PAGE

1 HOUR

INTRODUCTION TO GPS

OBJECTIVES

This course will enable the student to understand the fundamentals of GNSS (Global Navigational Satellite Systems), including GPS, GLONASS, and the various differential corrections available to agricultural DGPS users.

CONTENTS

• GPS terminology • How GPS works

• GPS limitations and sources of error

• Differential corrections including WAAS, OmniSTAR XP/HP, CenterPoint RTX, RTK, CORS, and VRS

1 HOUR

EZ-PILOT INSTALLATION AND CALIBRATION

OBJECTIVES

This course will introduce the student to the EZ-Pilot assisted steering system.

CONTENTS

• EZ-Pilot components • Installation overview • Calibration

5 HOURS

GETTING STARTED WITH EZ-PILOT

OBJECTIVES

This course will familiarize the student with setup, calibration, and operation of the EZ-Pilot system.

CONTENTS

• EZ-Pilot components • Installation overview • Setup and calibration • Operation (FM-750) • Operation (FM-1000) • Ride-and-drive

5 HOURS

GETTING STARTED WITH EZ-STEER

OBJECTIVES

This course will familiarize the student with setup, calibration, and operation of the EZ-Steer system.

CONTENTS

• EZ-Steer components • Installation

• Setup and calibration

• Operation (EZ-Guide 250) • Operation (FM-750) • Ride-and-drive 5 HOURS

AUTOPILOT AUTOGUIDANCE

This course will familiarize the student with setup, calibration, and operation of the Autopilot automated steering system. CONTENTS

• Autopilot components • Hybrid Autopilot • Installation overview • Setup and calibration

• Operation (FM-750) • Operation (FM-1000) • Ride-and-drive

2 HOURS

IMPLEMENT CONTROL: TRUEGUIDE

OBJECTIVES

This course will enable the student to understand the capabilities of TrueGuide, its installation, calibration and use.

Troubleshooting and handy hints will also be covered. CONTENTS

• TrueGuide components • Prerequisits

• Installation overview • Setup and calibration • Operation (FM-1000) • Ride-and-drive

2 HOURS

IMPLEMENT CONTROL: TRUETRACKER

OBJECTIVES

This course will enable the student to understand the capabilities of TrueTracker, its installation, calibration and use.

Troubleshooting and handy hints will also be covered. CONTENTS

• TrueTracker components • Prerequisits

• Installation overview • Setup and calibration • Operation (FM-1000) • Ride-and-drive

1 HOUR

NEW HOLLAND

AUTOMATED STEERING SYSTEMS

OBJECTIVES

This course will familiarize the student with New Holland product offerings in the manual, assisted, and automated steering categories.

CONTENTS

• Steering category overview • Features & Limitations:

- New Holland Manual Steering offerings - New Holland Assisted Steering offerings - New Holland Automated Steering offerings • Competitive comparison

5 HOURS

NEW HOLLAND INTELLISTEER

AUTOMATIC STEERING SYSTEMS

OBJECTIVES

This course will familiarize the student with setup, calibration, and operation of the New Holland IntelliSteer™ _{Automatic Steering System.}

PREREQUISITES • DGPS for Agriculture

• New Holland Automated Steering Systems • New Holland IntelliView™ _{Colour Displays}

CONTENTS

• PLM™ _{IntelliSteer components}

• IntelliSteer™_{-ready vs. IntelliSteer}™_-complete

• IntelliSteer™ _All-Makes

• Installation overview • Setup and calibration • Operation

5 HOURS

NEW HOLLAND INTELLIVIEW

_{COLOUR DISPLAYS}

OBJECTIVES

This course will enable the student to understand the features and capabilities of the IntelliView™ _{III, IntelliView}™ _{Plus II, and IntelliView}™ _{IV displays.}

Students will become familiar with setup, navigation, operation, and data recording. CONTENTS

• Hardware overview and installation • Software overview

• Menu navigation and functional areas • Basic display setup and operation

• Data recording (datacard requirements, card management, etc.) • Connecting GPS receivers for site-specific operations

• Operator’s manuals and technical support resources

5 HOURS

AFTERMARKET DISPLAYS

OBJECTIVES

This course will enable the student to understand the features and capabilities of the EZ-Guide 250, FM-750, and FM-1000 displays.

Students will become familiar with setup, navigation, operation, and data recording. CONTENTS

• Hardware overview and installation • Software overview

• Menu navigation and functional areas • Basic display setup and operation

• Data recording (datacard requirements, card management, etc.) • Connecting GPS receivers for site-specific operations

• Display Setup • Operator Setup • Profile Setup • Run Layout • Touch Controls • Plus • Connections • Options • Operation 1 HOUR

DISPLAYS

Overview of existing displays.

CONTENTS

5 HOURS

NEW HOLLAND YIELD MONITORING

OBJECTIVES

This course will enable the student to understand the setup, calibration, and operation of New Holland PLM™ _{factory yield monitor systems.}

PREREQUISITES

New Holland IntelliView™ _{Colour Displays.}

CONTENTS

• Basic PLM™ _{yield monitor principles}

• Yield monitor components

• Yield monitor setup, operator’s manuals, and pre-harvest checklist • Yield monitor calibration:

- flow sensor, moisture sensor, maximum working height, and wheel speed • Yield monitor operation, including mapping

1 HOUR

RG – 100 ROW GUIDANCE

OBJECTIVES

This course will familiarize the student with RG – 100 Row Guidance. It used in harvest when a guidance system was not used on the planter (or even when a guidance system was used, especially low accuracy systems, or with trailing planters because the planter will not follow the tractor exactly), hill-sides and down corn.

CONTENTS

• Hardware

• Components & Wiring diagrams

• Requirements (OEM sensor compatibility) • Display setup

• Operation

• Troubleshooting/diagnostics

5 HOURS

NEW HOLLAND

ROW GUIDANCE SYSTEM

OBJECTIVES

This course will familiarize the student with setup and operation of the PLM™ _{RowGuide row guidance system.}

PREREQUISITES

New Holland PLM™ _{IntelliSteer Autosteering.}

CONTENTS • Components • Installation overview • Setup

• Operation, including the use of MultiSwath • Ride-and-drive

1 HOUR

PRECISION HARVESTING SYSTEM

OBJECTIVES

This course will enable the student to understand the operation of precision harvesting systems and to set up, configure, and service these systems.

CONTENTS

• Principles of yield monitor and mapping systems

• Overview of autoguidance systems on harvesting equipment • Automatic Crop Settings setup and operation

5 HOURS

NEW HOLLAND PLM

_{CONNECT TELEMATICS}

OBJECTIVES

This course will familiarize the student with setup and operation of the New Holland Telematics solution.

CONTENTS • Components • Setup

• Vehicle operation • Web portal operation

1 HOUR

PLM

_{CONNECT TELEMATICS}

1 HOUR

NEW HOLLAND

PLM

_{APPLICATION CONTROL SYSTEMS}

OBJECTIVES

This course will familiarize the student with New Holland product offerings in the application control market.

CONTENTS

OEM variable rate product control: • Third-party controller interface • IntelliRate™ _{control system}

5 HOURS

FIELD-IQ

_{CROP INPUT CONTROL}

SYSTEM - SPRAYING, SPREADING,

& STRIPTILL/ANHYDROUS

OBJECTIVES

This course will familiarize the student with the Field-IQ crop input control system. CONTENTS

• Field-IQ™ _{Applications:}

- Spraying - Spreading

- StripTill/Anhydrous • Setup and Calibration • Operation (FM-750, FM-1000)

5 HOURS

FIELD-IQ

_{CROP INPUT CONTROL}

SYSTEM – PLANTING & MULTIPRODUCT

OBJECTIVES

This course will familiarize the student with the Field-IQ crop input control system. CONTENTS

• Field-IQ™ _{Applications:}

- Planting - Multiproduct • Setup and Calibration • Operation (FM-750, FM-1000)

1 HOUR

PLM

_{WATER CONTROL}

OBJECTIVES

This course will familiarize the student with principles of PLM™ _{Water control,}

including both leveling and drainage operations.

CONTENTS

Why PLM™ _{Water control?}

• Types of PLM™ _{Water control}

• Laser vs. GPS • Component overview • Software overview

1 HOUR

INTRODUCTION TO PLM

_{DESKTOP SOFTWARE}

OBJECTIVES

This course will introduce the student to the features and capabilities of the PLM™ _{Desktop Software. Students will become familiar with basic}

software operations including reading data, working with summary data and maps, and exporting setup data for vehicle displays.

CONTENTS

• Software overview

• Software installation, registration, and checking for updates • Installing data drivers

• Processing recorded data from precision farming displays

• Working with processed data (viewing data summaries, creating maps, layering field maps, editing map legends, etc.)

5 HOURS

PLM

_{WATER CONTROL}

LEVELING SOLUTION - Level I

OBJECTIVES

This course will familiarize the student with the PLM™ _{Water control}

system for land leveling. PREREQUISITES PLM™ _{Water control.}

CONTENTS

5 HOURS

PLM

_{WATER CONTROL}

DRAIN DRAINAGE SOLUTION - Level I

OBJECTIVES

This course will familiarize the student with the PLM™ _{Water control Drain system}

for surface and subsurface drains. PREREQUISITES PLM™ _{Water control.} CONTENTS • Features • Components • Installation • Setup • Calibration • Operation • Features • Components • Installation • Setup • Calibration • Operation

PLM Academy is the new web

portal dedicated to Customers.

Starting April 2012, log into

the new PLM Academy site at

www.plmacademy.newholland.com

Take advantage of having all your

Precision Training available at one place

and at the click of a mouse.

REGISTRATION AND FURTHER INFORMATION

Through the new PLM Academy portal you can:

• Explore the training catalogue

• Watch tutorials and videos

• Enroll in Instructor-Led (face to face) courses

• Enroll in and complete web-based courses

• Download informational documents and guides

• And more…

If you have questions about one or more of the training courses,

e-mail [email protected]

For more info

www.plmacademy.newholland.com CUSTOMER TRAINING

INB