QUICKPEEK
START GUIDE
Contents
Product Diagram 2-3
Download & Register 4-5
Install 6-9
Connect: QR Code Mode 10-13
Settings 14-15 Live View & Playback 16-17 FAQs 18-19 Troubleshooting & Specs 20
Notices & Support 21
What’s in the Box
Get Ready
Smart Wi-Fi Doorbell Mounting Bracket Wireless Chime Rechargeable Battery 2 Wall Anchors 2 Mounting Screws Security Release Tool Security Screw User Manual 3M Adhesive Backing
• Know your Wi-Fi network and password • Locate a suitable mounting location, but do NOT mount until setup is complete
• Geeni app requires a mobile device running iOS 9 or higher or Android 5.0 or higher
• Operates on a 2.4GHz Wi-Fi network • A microSD card is required to record footage Thank you for purchasing
your Geeni smart home product. Get started using your new devices by downloading Geeni, one convenient app that manages everything straight from your phone or tablet. Easily connect to your home Wi-Fi and control multiple devices from the touch of your fingertips.
Support:
If you encounter any issues, please call (888) 232-3143 (Toll Free) or go to support.mygeeni.com for help.
Support is available seven days a week.
A F A B H I J G C D D C B E E F QUICKPEEK START GUIDE I H G J
Camera
FRONT
LEFT
RIGHT
Microphone Call Button LED Indicator light Speaker Motion Sensor microSD Card Slot Micro USB Charging Port Reset Button RESET USB
Product Diagram
Product Diagram
5
Register a Geeni account:
enter your mobile phone number or email address.
Download the Geeni app. Enter the verification code and create a password.
Download & Register
1
STEP 2
STEP 3
STEP 4 STEP 1
Please be sure to charge the battery to 100% using the micro USB charging port. Before use you will
need to remove the battery tab.
2 METHODS TO INSTALL
Align the Mounting Bracket to where you would like to mount it, and mark the location of the screw holes.
Drill 2 holes on the marked locations. If you are mounting to stucco, brick, or concrete, use the wall anchors to make sure your Bracket will be securely mounted. Then, screw in the Mounting Bracket.
Use the included 3M adhesive backing to simply stick the Mounting Bracket to the desired location.
Install
2
STEP 1 Open the cover of the QUICKPEEK STEP 2
3M
ADHESIVE
1
2
REMOVBEFOE REUSE RESET USB
METHOD2
9
Setting up the Wireless Chime:
Plug it in and choose between 18 different chimes and 4 volume levels + mute.
Its that easy!
Please Note: Refer to Step 7 on pg. 13 if your QUICKPEEK and chime don’t autimatically pair.
Install (cont’d)
2
STEP 3STEP 4
STEP 5
With the cover still off press and hold the reset button until you hear the “sytem reset” prompt from the doorbell speaker.
RESET
Insert microSD card into the microSD port
QUICKPEEK
MOUNTING BRACKET
VOLUME
BUTTON CHIMEBUTTON
OPTIONAL:
Insert your MicroSD card into the microSD port. This is not necessary for live view, but is required to record and play back footage.
Close the cover and use the security screw to lock down the cover and attach QUICKPEEK to the mounting bracket.
Your QUICKPEEK is now ready to
connect via the Geeni App.
Connect to Geeni App:
QR Code Mode
3
STEP 1 Make sure the indicator light is blinking. If it’s not, use the reset button following the instructions on page 8.
STEP 3 STEP 2
Choose “QR Code”.
In the Geeni app, on the top corner of the Devices screen, click (+). Choose “Video Doorbell”.
13
Connect to Geeni App:
QR Code Mode (cont’d)
3
STEP 4
Enter your Wi-Fi network and password.
NOTE: Geeni only works with 2.4GHz networks. STEP 5
Use the QUICKPEEK’s camera to scan the QR code on your smartphone.
STEP 6
The light will turn blue once the QUICKPEEK connects to the Geeni app.
4”- 8”
STEP 7 When the chime is plugged into the wall, it will ring when the doorbell is pressed.
If the chime doesn’t ring when the doorbell is pressed, press and hold the volume button for 3 seconds. This will reset and pair the chime with the doorbell.
VOLUME
Settings
Access Camera Settings:
From your main device list, click on your QUICKPEEK. Next, press the “•••“ button on the top right for advanced settings.Device Name:
Press to rename your device to something like “Front Porch” or “Backyard”.Device Sharing:
Let friends, spouse, roommates, or family keep an eye on what your QUICKPEEK sees. Whether it’s a garden or an anticipated piece of mail, you can decide who gets to check in, access the camera, interact with guests, and get notifications.Remove Device:
Delete the QUICKPEEK from your account. It will remain linked to your account unless it is deleted.Time Watermark:
Turn the Time Watermark on to always see a timestamp of when video is taking place.Motion Detection:
When turned on, you’ll receive notifications to your phone whenever the DOORSCREEN senses motion. Press to turn Motion Detection off or adjust sensitivity.Format SD Card:
Press to erase your microSD Card.Night Vision:
The QUICKPEEK will automatically activate Night Vision in the dark. Toggle here to manually turn night vision on or off.Front Doorbell Back
Standard
17
Front Doorbell Back
Standard
Motion Alerts Press to Speak Record
Playback Signal : 99 % Screenshot
Live View
Hear what’s happening around the doorbell camera Full screen Activate push notifications to be notified of any movement Press to activate the microphone and speak through the doorbell camera.Save the live camera footage onto your phone memory
Save a screenshot of live video onto your phone memory
Play back recorded footage (microSD card required) 1 1 5 5 2 2 6 3 3 7 7 4 4 6 Front Doorbell Back 10:00 11:00 12:00 13:00 21:27:17 Front Doo r... 2018–06– 08 21:25:38 Front Doo r... More
Record Screenshot Calendar
Playback
Hear what’s happening around the doorbell camera
Save a screenshot of playback footage onto your phone memory Full screen
Save the playback footage onto your phone memory
Change date of video playback 1 1 5 5 2 2 3 3 4 4
Frequently Asked Questions
1. Can I share with family and friends?
Yes! You can share access to all Geeni devices— cameras, plugs, bulbs, doorbells, etc.— with family and friends. In the Geeni app, press the “Profile” button and click on “Device Sharing” to give or revoke sharing permissions. In order to share, the other user should have already downloaded the Geeni app and registered an account.2. How much footage can the QUICKPEEK
camera record?
An optional microSD card is required to record footage. Depending on video quality, your QUICKPEEK will use around 1GB of storage a day, so a 32GB card can provide weeks of continuous video. As the card fills up, the oldest footage will automatically be replaced by new video, so you don’t have to ever worry about running out of storage space.
3. My QUICKPEEK has a funny name. How do
I rename it?
From your main device list, click on the doorbell that you want to rename, press the “•••” button on the top right for advanced settings, and click “Modify Device Name”. You’ll then be able to choose a more familiar name.
4. What’s the wireless range?
The range of your home Wi-Fi is heavily dependent on your home router and the conditions of the room. Check with your router specifications for exact range data.
5. If my Wi-Fi/Internet goes down, will my
smart doorbell still work?
Geeni products need to be connected to Wi-Fi in order to use them remotely.
Front Doorbell Back
Standard
21
• Mobile device running iOS® 9 or higher or Android™
5.0 or higher.
• Existing Wi-Fi Network, Wi-Fi: IEEE 802.11 B/G/N, 2.4GHz
(not compatible with 5GHz Wi-Fi networks)
Troubleshooting
The QUICKPEEK does not power on. • Verify that the battery is securely seated in your
QUICKPEEK.
The QUICKPEEK powers on but the chime does not work when the button is pressed. • Ensure that the Wireless Chime is plugged in. • If the chime doesn’t ring when the doorbell is pressed,
press and hold the volume button for 3 seconds. This will reset and pair the chime with the doorbell. The QUICKPEEK will not connect to the Geeni app. or can’t connect to your Wi-Fi network. • Make sure you entered the correct Wi-Fi password
during the Wi-Fi setup.
• Check whether there are any internet connection problems. • Reset your Wi-Fi router and try again.
FCC Notice:
This device complies with Part 15 of the FCC Rules. Operation is subject to the two following conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interfer-ence that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Support:
If you encounter any issues, please call (888) 232-3143 (Toll Free) or go to support.mygeeni.com for help.
Support is available seven days a week.
To explore our full selection of products, visit us at: www.mygeeni.com © 2019 Geeni Innovations • 45 Broadway 3rd FL, New York NY 10006. The illustrated product and specifications may differ slightly from those supplied. Geeni is a trademark of Geeni Innovations LLC. iPhone, Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Galaxy S is a registered trademark of Samsung Electronics Co., Ltd. Google, Google Play, and related marks and logos are trademarks of Google LLC. iOS is a registered trademark of Cisco in the U.S. and other countries and is used under license. Amazon, Alexa and all related logos are trademarks of Amazon. com, Inc. or its affiliates. All other trademarks and trade names are those of their respective owners.
Made in China
System Requirements
Technical Specifications
• Camera: up to 1080p HD VIDEO • Field of View: 130º Wide Angle • 2-Way Audio, Ring and Motion Alerts • Storage - Up to 64GB Micro SD Card • Power - 1 rechargeable battery (included) • Motion Sensor - activates within 12ft
