Optimux-134, Optimux-125
Full text
Figure
Related documents
• Modular Integrated Access Device (IAD), providing bundled data, IP and telephony services over E1/T1 access lines.. • E1/T1 uplink over copper or fiber optic media • E1
When both the station clock and an external clock are used, the unit’s transmit clock for transmission over the STS-3/OC-3/STM-1 uplink is locked to the station clock input
• Green: Ethernet link integrity • Yellow: Traffic activity Station Clock Interface (Rear Panel only). OK (green): External valid E1/T1 clock source exists on clock connector
VLAN stacking is used to tag direct user and management traffic to different VLANs, thus preserving the user LAN settings, fully separating user traffic from management data..
Optional patch panel interface adaptors for Optimux-45L to convert Telco connector into channel connectors Legend. % Patch
LRS-102/UNBAL/DCR/CL1R 12-slot modem rack with SNMP management, Unbalanced E1 port, redundant DC power supply, redundant common logic module. SPECIAL CONFIGURATIONS
Optimux features comprehensive test and diagnostic capabilities that include local and remote loopbacks on the uplink interface and on each E1/T1 port. A local loopback is
The smaller 1m/2o Alcatel-Lucent 1655 AMU offers simple and cost- effective Ethernet, E1, STM-1, STM-4, and STM-16 access, supporting applications such as enterprise networking