Velocity Web Services Client 1.0 Installation Guide and Release Notes
Full text
Related documents
Modify DomainStr option to the same IP address (and TCP Port address if different than 80 that you used when creating the web site. If you have a domain name registered for this
Before you configure and install the Lync 2010 Enterprise Edition Server, you need to install and configure the server role and Web Services for Internet Information Services
Please locate Internet Information Services (IIS) Manager and Web Sites then right-click on Default Web Site and click on Properties... Please go to the Home
You can use the default settings or configure this feature in the Network Settings section of these pages: Line 1 Settings (PHONE Port) , PSTN (LINE Port) , and DECT Line 1 -
HTTP (port 80) from I-Server Web server to the Internet HTTP (port 80) from Delphi client to I-Server Web server SQL (port 1433) from I-Server Web server to I-Server Web server
3 Configure the network load balancer to check the availability of both the Apache web server (default port 80) and the Tomcat server (default ports 8132 and 8009) of each server
RLA Web Edition | Installation and Use Guide 4 If you use Control Panel to install IIS, you get the default installation, which has a minimum set of features.. If you need
Prior to accessing the AP’s management agent through a network connection, you must first configure it with a valid IP address, subnet mask, and default gateway using the