• No results found

Terminal sliding mode control for continuous stirred tank reactor

N/A
N/A
Protected

Academic year: 2020

Share "Terminal sliding mode control for continuous stirred tank reactor"

Copied!
21
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1 CSTR diagrammatic sketch
Table 1 Dimensionless parameters for the CSTR model
Table 2 The controllers’ parameters
Figure 2 The performance of SITSMC and FITSMC (Non-smooth)
+4

References

Related documents

Chronic Ulcers pose significant and challenging health as well as economic problems, as it needs long term surgical and nursing care whether it is á Burn

Abstract — As web is expanding day by day and people generally rely on web for communication so e-mails are the fastest way to send information from one place to

The plasma necessarily has a strong pressure gradient (the pressure must be high in the centre to generate enough fusion reactions, and low at the edge due to the low temperature)

These organisational security culture factors such as top management involvement, policy enforcement, policy maintenance, security training, and other external factors such

IMPORTANT: for security reasons, if turning the ignition ON is not followed by pressing the push-button of the radio- transmitter (or, in case of loss or failure of the transmitter,

The LocktransP, in other words, makes it possible to switch the protection facilities in the cargo bay on and off from a central

There are two possibilities for designing an active corrosion protection system of earthburried pipe- lines: Cathodic protection with impressed current or galvanic anodes.

There are many methods for seeking approximate solutions such as collocation method, the fractional differential transform method, Legendre wavelet method, Taylor expansion