User Manual
Transparency TFT LCD Advertising Demo Box
Model TDS-2403A
TDS-3203A
TDS-4203A
LEADWELL Optical Co. Ltd. No.18,YongKe S Rd., YongKong Dist.,
Index
IMPORTANT PRODUCT SAFETY INSTRUCTIONS ... 3
Cleaning the LCD Display ... 4
Safety Guidelines ... 5
Installation ... 6
Accessories ... 6
Install Remote Controller Batteries ... 7
Connections ... 8
Insert USB Stick ... 8
Connect Signal Cables ... 8
Connect Power Cable ... 9
Turn Power On ... 9
Controls Introduction ... 10
IR Remote Control ... 10OSD Functions ... 12
PREFERENCE ... 12 TIME SET ... 14 FUNCTION SET ... 16 SCREEN SET ... 17How to build Marquee ... 18
Insert Adv ... 18
Other ... 19
Supported Video and Photo ... 19
IMPORTANT PRODUCT SAFETY INSTRUCTIONS
Read carefully and follow all warnings and instructions in this document and those marked on the product before you operate your display. Failure to follow warnings can result in personal injury or damage to product. Keep this document in a convenient location for future reference.
Proper Positioning of Display
Always handle your LCD display with care. Avoid touching the LCD screen. Skin oils are difficult to remove.
Always position your LCD display on a stable and level surface or mount it on a wall. Unstable surfaces can cause your LCD to topple and fall, resulting in possible damage or injury.
Avoid exposing the LCD display to direct sunlight or high temperatures, which can damage or shorten its useful life.
Do not place near heat sources such as radiators, heat registers, or other appliances that generate heat. Avoid exposing the LCD display to rain, water, moisture or high humidity.
Do not place your LCD near basins or sinks where it may come in contact with water. Orient your LCD display away from direct sunlight to reduce glare.
Never place heavy or sharp objects on the LCD display, video cable, or power cord.
Overloading Outlets
Do not overload electrical power sources when installing the display. Overloading wall outlets, circuits, or extension cords can result in overheating, fire, or electric shock. Use only grounded or polarized outlets.
Power Cord Protection
Minimize wear on power supply cords. Power supply cords should be routed away from foot traffic and contact with other objects. Do not route power cord under rugs or carpeting. The cord should never be severely bent, pinched, or twisted. Periodically inspect power cords for wear or damage, particularly near plug and the point where it exits from the product. Unplug cord and discontinue use if damage is
discovered.
Ventilation
ventilation. Increased temperatures may cause fire or device failure.
To assure proper ventilation, do not block the openings by placing the LCD Display on a bed, sofa, rug or other similar surface. Do not place it in a built-in installation, such as a bookcase or an enclosed rack, unless proper ventilation is provided.
Other Notices and Precautions
Caution: Never remove the rear cover. There are no user serviceable parts inside. Your LCD Display contains high-voltage parts. You may be seriously injured if you touch them.
Do not attempt repairs yourself. Your warranty does not cover repairs or attempted repairs by anyone not authorized by LEADWELL Optical. Refer all servicing and repairs to qualified service personnel.
If smoke, abnormal noise, or strange odor is present, immediately unplug the power cord. Contact a qualified service technician.
If your LCD Display will not be used for extended periods of time, unplug the power cord and remove the batteries from the remote control.
Cleaning the LCD Display
MAKE SURE THE LCD Display IS TURNED OFF
NEVER SPRAY OR POUR LIQUID DIRECTLY ONTO THE SCREEN OR CASE
To clean the screen:
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
To clean the case:
1. Use a soft, dry cloth.
2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.
Disclaimer
LWO does not recommend the use of any ammonia or alcohol-based cleaners on the LCD Display screen or case. Some chemical cleaners have been reported to damage the screen and/or LCD display case.
LWADWELL Optical will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
Safety Guidelines
Warning: This device must be operated with the original power supply.
CAUTION: The socket-outlet should be installed near the equipment and should be easily accessible.
CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that is certified for the individual country. Some examples are listed below:
USA...…UL Switzerland……SEV Canada...CSA Britain ...…BASE/BS
Germany……….VDE Japan ...Electric Appliance Control Act
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION
The power cord set for this unit has been enclosed and has been selected according to the country of destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to replace the original cord set, or if the cord set is not enclosed.
The female receptacle of the cord set must meet IEC-60320 requirements and may look like this :
Installation
Accessories
The accessories are
IR Remote Controller
Adapter
Power Core
Install Remote Controller Batteries
Remove the battery support Insert a battery on it.
Re-attach the battery support. CAUTION
* Dispose of the battery in accordance with local laws and regulations.
* Keep the battery away from children and pets.
Connections
Insert USB Stick
You can select a USB stick and let the demo box display the media files in the USB stick. Connect Signal Cables
There are two signal input ports :
The connection between signal source and display are :
Signal Source Signal Port on Monitor Connection Cable
PC/Media Player D-Sub
PC/Media Player HDMI on signal source device
Connect Power Cable
Connect the power cord to the back of the LCD Display and then into a properly grounded AC outlet.
Turn Power On
Controls Introduction
IR Remote Control
Switch power on or power off MUTE on or off
Fast Forward Fast Backward Play and Pause
Up (Note : It will pop up the control bar when playing） Left
Right
Down (Note : It will pop up the control bar when playing）
Volume down Next
Previous
Exit menu or exit Playing
OSD Functions
PREFERENCE
Item Selection Description
OSD Language 中文
English
To select the font language on the OSD, there are “Simple Chinese, English ,” items to select.
Repeat Mode Repeat All Repeat None Repeat One
To select the repeat mode of playing media files. The selection items are:
Repeat All : To repeat all the media files. Repeat None: To play all the media files once. Repeat One: To repeat single file.
Play Log On/Off When turning on, the system will record the playing file , start up time, turn off time.
Note: It will not support to record the Chinese file name. Power Resume On/Off When turning on, the system will continuously play the file
which was terminated due to power off. Photo Slide mode Normal
… etc.
To set transmit effect when playing the slideshow.
Photo Slide time 5,7,10,15,30,6 0,90,120,150
Marquee On/Off To turn on the scrolling message. Marquee Color While
Red Green Blue Purple Yellow
To select the font color of the scrolling message. Marquee Back
Color
To select the background color of the scrolling message.
Play Type All
Photo Music Photo+MP3 Movie Playlist
To select the desired file want to play.
No Device Off On/Off When turning on, the system will turn off automatically when there are no memory devices.
Change password ****** Input Source VGA
HDMI USB AV
To select the input signal source. Note:
If we want to play the content in the memory card, please select “USB”.
AV item is useless.
TIME SET
Press enter to setup.
Item Description
Year To setup year.
Month To setup month.
Date To setup date.
Hour To setup hour.
Minute To setup minute
Show Time To display clock on the right corner or not. There are 4 sub-items to select:
All : To display year/month/date/hour/minute Off: To not display clock.
Date: To display year/month/date/hour Time: To display hour/minute
TIME1 SET
To set up power on/off time.
Item Selection Description
Timer Mode Every Day Mon~Fri Sat~Sun Off
To auto power on/off every day.
To auto power on/off on Monday to Friday. To auto power on/off on Saturday and Sunday
On Time To select the power on time
Off Time To select the power off time
Volume To select the volume when power on.
FUNCTION SET
Item Selection Description
Insert Adv(min) 1~60 To select the timing interval to insert some advertisement. Insert Adv Num 1~9 To select how many advertisements want to insert.. Picture Rotate To rotate the picture.
Show Taibiao On/Off To display the serial number of the system. Marquee Speed Fast
Middle Slow
To scrolling message speed.
SCREEN SET
Item Selection Description
Brightness Brightness adjustment, you can select the value from 0~100. Contrast Contrast adjustment, you can select the value from 0~100. Color Saturation adjustment, you can select the value from 0~100. Sharpness Video Sharpness adjustment ,you can select the value from
0~100. Noise Reduction Off
Low Middle High Default
To reduce the noise when playing video.
Video Mode Original size Scaling Up Full Screen
To select the aspect ratio of the video display.
Color Temperature Color temperature adjustment, you can select cool
How to build Marquee
To create a SCROLL.TXT file，and key in the message into the file.
Note: Please select Unicode coding.
Insert Adv
When playing video in the root dictionary, the advertisement, located in the folder “\advertising”, could be inserted routinely.
Other
Supported Video and Photo
Filename Extension
Video
Format Codec Resolution Bit Rate
dat,mpg,mepg MPG MPEG Mpeg1,2 1920x1080@30P 20Mbit/sec ts,trp,tp,m2ts MPEG2-TS H264-TS MPEG2,H.264 1920x1080@30P 20Mbit/sec
Vob MPEG2-PS MPEG2 1920x1080@30P 20Mbit/sec
Motion JPEG AVI MOV JPEG 1920x1080@30P 20Mbit/sec asf,wmv ASF(Revsion 01.20.03) VCI 1920x1080@30P 20Mbit/sec Ts ts AVS 1920x1080@30P 20Mbit/sec
Supported Timing Mode
The supported timing modes for VGA signal / HDMI signal are
Timing Mode Resolution