David Stanley Auctions

(1)

David Stanley Auctions

Auction of Antique and Modern Woodworking Tools

Live internet bidding & absentee bidding only Section 1. Lots

1-700 General Tools. Section 2. Lots 701-999 Superior Quality

Antique Woodworking Tools

Started 24 Sep 2020 09:30 BST

Stordon Grange Ashby Road Osgathorpe Leicestershire LE12 9SR United Kingdom

Lot

Description

1 Four unused STANLEY bevel edge chisels with composite handles 1/4" to 1" F

2 A USA STANLEY Bedrock No 605 1/2C with flat sides and corrugated sole, some light pitting G

3 An English STANLEY No 4C with corrugated sole G+

4 A mortice lock chisel, 3 mortice chisels and another all with boxwood handles G++

5 A d/t steel SPIERS No 7 coffin smoother with slight crack to handle G+

6 A steel soled brass shoulder plane by JOHN MOSELEY with mahogany infill and wedge G

7 A beech plough by VARVILL and a moving fillester by MATHIESON G++

8 A NORRIS A71 beech razee style plane 12 3/4" x 3" with replaced handle and iron G

9 Quantity of old screwdrivers etc G

10 A box of tools G+

11 Four sets of rusty plough irons for restoration

G-12 Five combination planes for spares and repairs

G-13 Eight books

G-14 RECORD Nos 05, 06 and 07 jointer some light pitting G

15 RECORD Nos 04 1/2 x 2, 04 and 05 1/2 some light rust G

16 40 old chisels and gouges G

(2)

18 A bowl adze with 6" edge and makers mark G++

19 Quantity of kitchen and household tools G

20 Quantity of taps, dies reamers etc G

21 A small claw hammer by TIMMINS and two others G+

22 Eight squares, bevels etc G

23 Seven axes, billhooks etc G+

24 13 beech and boxwood spokeshaves G

25 Six brass topped rosewood levels 6" to 10" G

26 Eight ebony and brass bevels G

27 Ten ebony and brass squares G

28 Eight rosewood and brass squares some light rust G

29 48 moulding planes G+

30 Six moulders with unusual boxing, one replaced wedge G

31 Five dado planes with brass depth stops, one replaced wedge G

32 A rare MATHIESON No 17 combination sash and side fillester with double d/t sole and depth stops G

33 Two unused screwboxes 1" and 1 1/2" in orig boxes, made in Taiwan N

34 19 turning tools G+

35 A well used 15 1/2" d/t steel panel plane by PRESTON for refurb. G

36 A rosewood toolpad with tools in handle and a hand vice G

37 A RECORD No 148 dowelling jig with various collets and a WODEN No X190 dowelling jig G+

38 A WODEN dowelling jig in orig box and a STANLEY No 59 G+

(3)

40 English STANLEY Nos 4 and 4 1/2 G+

41 English STANLEY Nos 50 and 78 both in orig boxes G+

42 Two STANLEY No 80 scrapers and four steel shaves, well used G

43 Four pairs of trammels and a 15" level G

44 A d/t steel rebate plane 9" x 1 1/4" with rosewood infill and wedge, wide mouth G

45 A SIEGLEY combination plane marked No 2 on fence with cutters, one screw missing G

46 Two corner braces and two others G

47 Five part combination planes by STANLEY and RECORD

G-48 Three planes for restoration

G-49 Quantity of large screws inc 3" x 24 and 5" x 28 G

50 Quantity of locks and keys G

51 A large quantity of router bits and cutters G

52 Quantity of old square nails G

53 Three rosewood and ebony squares and 3 bevels G+

54 A 3" steel tipped brass plumb bob by PRESTON and another G+

55 18 chisels and carving tools G+

56 Six tools G+

57 26 turning tools G+

58 A gentleman's 11" double edge billhook by BRADES with ebony handle G

59 Sailmaker's tools ie. 17" lignum fid and another in boxwood, needle case with needles, palm, pricker and a blackwood seam rubber G+

60 A nicely turned lignum carver's mallet G+

(4)

62 A rare brass four piece gang mould for pressing 6 horn mouth pieces for musical instruments G+

63 A box of 20 interesting small tools G

64 Three felling axes G

65 A STANLEY No 45 with one box of cutters G+

66

A large and comprehensive collection of STANLEY BRIDGES electric drill attachments all in orig boxes many of them unopened inc. 3/8" variable speed colourmatic drill, saw, sanding, jointing tables and lathe, jigsaw, sanding, morticing, hedge cutter, spraygun etc attachments G++

67 Nine H & R's by MOSELEY Goswell St and 18 other moulders in pine chest G

68 Quantity of cobbler's tools G

69 A copper pipe bending machine with two bending springs G+

70 An unused NORTON multi oilstone with 3 stones on rotating spindle G+

71 Nine metal planes by various makers G+

72 Nine metal planes by various makers G+

73 Seven STANLEY No 4 smoothers and one by RECORD G+

74 Nine old metal block planes G

75 Five No 4 and 4 1/2's with cracked handles G

76 RECORD Nos 0151 shave, 044 plough, 2506 L&R rebate (holding down clamp snapped) and 077A bullnose G+

77 STANLEY Nos 78 rebate and 80 scraper G

78 A box of tools G

79 A pair of RECORD No 3 floor board cramps and two holdfasts G++

80 An ORTEGUIL No OR-C-55 mitre trimmer G++

81 An iron smoother with replaced wedge behind steel lugs pitting spot to side G

82 Nine boxed oilstones and a quantity of slipstones G+

(5)

84 A RECORD No 077A adjustable bullnose plane G+

85 A PRESTON adjustable bullnose plane with worn iron G+

86 Quantity vintage and modern brass fixtures and fittings 17Kg G

87 A box of tools G

88 A carpenter's adze by GILPIN and another G+

89 A large quantity of oilstones G

90 A boxed Charnley Forest oilstone and two others G+

91 Six axes, three axe heads etc G

92 A small single sided billhook by PARKES and another larger G++

93 14 moulding planes etc G

94 19 moulding planes, one 10" long G+

95 14 oilstones, 7 boxed G

96 42 chisels and gouges with composite handles, some light rust G

97 50 chisels and gouges, some light rust G

98 Two sets of hollow mortice drills, two sets of Forstner bits etc F

99 A conjectural copy of the ash brace with oak head found on the Mary Rose F

100 A recent copy of a pair of 18c oak squares with 9" and 16" arms F

101 C.Tomlinson; 1853 Cyclopaedia of Useful Arts 1052pp quarter leather bound G+

102 Proudfoot & Walker; Woodworking Tools and Michael Dunbar; Antique Woodworking Tools G++

103 Nine books and various early issues of Woodworker G

104 Two little used No 4 smoothers by RAPIER & SALMEN G++

(6)

106 Four b/b saws and one s/b G

107 Three b/b saws and two s/b's G+

108 A DISSTON saw and 3 others G

109 A 14" b/b tenon saw by SYMES & Co Sheffield and two other saws G

110 12 b/b tenon saws mainly by SPEAR & JACKSON G

111 12 b/b tenon saws mainly by SPEAR & JACKSON G

112 Five b/b saws and 5 s/b saws G

113 11 DISSTON hand saws G

114 A b/b by DISSTON, two s/b saws by LUNT and G.H.BUCK and two others G+

115 Two DISSTON rip saws with finger hole handles G

116 Four DISSTON saws and another, a little light rust G

117 Two b/b saws and two s/b saws G+

118 A hand saw and a b/b saw both by DISSTON G+

119 A b/b d/t saw by G.H.BUCK with 8" blade G+

120 A quirk router and a spoke shave both by PRESTON with orig irons G

121 A patternmakers bronze interchangable sole plane with six soles and two irons G

122 A kit of 40 carving tools etc. G+

123 A watchmakers lathe with various collets and attachments in orig fitted wood box with small plaque 'Triumph Lathe' G+

124 Two steel planes for restoration, one lacks wedge the other lacks wedge and infill

G-125 Two ploughs and a sash fillester, lacking one wedge G+

126 A 1 1/2" steel shoulder plane by SLATER tiny chip to mouth G+

(7)

128 Two chamfer shaves, one with Marples iron G

129 160 unused PRESTO drill bits with SDS plus shank 5mm to 16mm F

130 Six G cramps and a CARVER cramp G+

131 Quantity of air tools and accessories etc incl. 3 air drills (not tested)

132 A 100mm two way cross slide vice G++

133 Quantity of engineering tools G++

134 A little used TANGI FLOW 3/3A lathe roller box G+

135 Eight new 50m surveyors tapes N

136 A little used milling machine vice by JONES-SHIPMAN F

137 A beech plough by BUCK and a moving fillester by MATHIESON with 8 irons G+

138 A little used English STANLEY No 50 complete in orig box G++

139 16 MARPLES chisels with composite handles G

140 24 chisels with composite handles G

141 Five metal planes by STANLEY, RECORD & SKELTON G

142 23 bevel edge chisels G

143 26 chisels & gouges G

144 Nine moulding planes and a small smoother G

145 A box of tools G

146 A STANLEY No 45 with cutters in orig fitted wood box G+

147 An unused English STANLEY No 4 in orig box F

148 An OWT router and four other beech planes G+

(8)

151 Three micrometers and three other engineer's tools G+

152 17 slotted irons by RECORD and STANLEY G+

153 21 moulding planes by DOWDEN, MUTTER, MADOX etc G

154 A set of four cranked gouges by MARPLES 1/4" to 1 1/8" with trade labels on boxwood handles G++

155 Ten carving tools G++

156 An iron smoother with brass lever and rosewood infill G

157 RECORD Nos 075 and 076 bullnose planes and 772 router all in orig boxes G+

158 13 bevel edge chisels G+

159 Four dowelling jigs lacking collets G

160 A recent, little used RECORD No 020C circular plane in orig box F

161 Eight mainly steel tapes by RABONE CHESTERMAN G+

162 A 14" iron panel plane for restoration

G-163 A RECORD No T5 fore plane lacks side handle G++

164 RECORD Nos 04 and 05 1/2 handle spur chipped G+

165 Ten engineers squares and two levels G+

166 Eight adjustable spokeshaves by RECORD and STANLEY G+

167 Various tool auction catalogues G

168 Nine wood tech books G+

169 Little used RECORD Nos 043 and 044 both in orig boxes G++

170 A RECORD No 073 shoulder plane, a few rust spots G+

(9)

172 Ten beech spokeshaves, a glue pot and other tools

G-173 STANLEY Nos 75, 82, 90, 92 and 98 for restoration

G-174 A STANLEY No 98 and 7 other block planes etc

G-175 A PRESTON adjustable bullnose plane G+

176 Three mitre cutters and a mitre clamp all boxed G+

178 A 48" straight edge by CHESTERMAN No 90 and 3 other steel rules G

179 A dowel or peg maker in leather case and a burnisher both by LIE NIELSEN and a honing guide by VERITAS G++

180 A RECORD No 041 adjustable shoulder plane G

181 An adjustable bullnose plane by PRESTON with orig iron G

182 A USA STANLEY No R100B roofing square with brass markers G+

183 19 chisels and gouges G+

184 Little used RECORD Nos 078 rebate and 09 1/2 block plane G++

185 RECORD Nos 04 1/2 and 05 G

186 STANLEY Nos 4 and 5 G

187 Two STANLEY No 4's, ACORN and GTL G

188 A rare Great Western Railway rail bender known as a "Jim Crow" marked GWR on the enormous nut, c/w a 4'6" spanner. Not for posting!! G

189 A sailmaker's 10" lignum fid, another 12" in boxwood, a rosewood seam rubber and a snail pricker G

190 Three coach maker's moulding routers and a scraper G

192 20 moulding planes G

(10)

194 Two boxes of camera items, many by AGILUX, Purley Way, Croyden. (these were being produced in the T Norris factory) G

195 A RAWLPLUG counter display of drills, fixings etc G+

196 A little used STANLEY No 45 with cutters G++

197 A SWIFT tool box 22" x 7" x 4" with trade label G+

198 A little used English STANLEY No 6 in orig box F

199 Three unused ECLIPSE saws and a bit gauge in orig boxes F

200 Six USA STANLEY planes, DISSTON saws etc G

201 Seven unused tools in orig boxes by FOOTPRINT, SURFORM etc F

203 A pair of side rebate planes by HIELDS G++

204 Two moulding planes by I SYM (marks G+ 1753-84) G+

205 A HOBBIES treadle fretsaw, bed requires attention G

206 Two carpet stretchers G

207 Quantity of bookbinder's stamps etc G

208 A large quantity of old wood drawer knobs G

209 A large quantity of old wood drawer knobs

G-210 An engineer's 20" height gauge by CHESTERMAN and a set of HOFFMAN rollers, both in orig boxes G

211 Ten French engineering books 1887 to 1906 G+

212 Quantity of part drawing sets and an ebony desk tidy

G-213 A box of tools

G-214 A trench bottoming tool with 7' handle and a peat spade G

(11)

216 30 chisels and gouges G

217 Nine claw hammers G

218 28 hammers G

219 Four little used STANLEY Handyman No 4 smoothers G+

220 A glazier's 24" boxwood T square a 48" boxwood rule both by RABONE G+

221 An unused pair of 4' wood cramps G+

222 A DREMEL tool and 3 other items G

223 Two steel tipped brass plumb bobs G+

224 Six metal planes by RECORD, STANLEY and RAPIER G

225 Bernard E. Jones; The Practical Woodworker 4 vols and 10 other books G+

226 14 books etc G+

227 Miller's Guide and 10 other books G+

228 A TREND biscuit jointer in orig case and quantity of biscuits, Pat tested G+

229 An ebony and brass mortice gauge, small crack and five other gauges G

230 An Ultimatum brass framed ebony brace by MARPLES with replaced ring in ebony head G+

231 An unused English STANLEY No 50 in orig plain box G++

232 Nine beech try or jack planes G

233 Seven four fold boxwood rules and a two fold G

234 Five brass topped rosewood levels 6" to 9" G

235 A little used RECORD BS 250 band saw on stand 240v Pat tested G+

236 A METABO chop saw 240v Pat tested G+

(12)

238 A large quantity of modern screwdrivers

G-239 Quantity of builder's trowels etc G+

240 30 books G

241

An unused, unassembled, SIP01940 14" X 43" professional wood lathe of cast iron construction with variable 500rpm to 2500rpm and digital readout, rotating headstock with all accessories, instructions etc. in 5' 4" packing case, some items removed for ease of transport, still under guarantee c/w a se ...[more]

242 A 110v extension lead and a four way splitter G

243 A REXON DP200AS pillar drill and a 5" CLARKE bench grinder Pat tested G

244 A large INCA 3 wheel band saw 240v Pat tested G+

245 An unused REXON wet grinder No 180A 240v in orig unopened box N

246 A CLARKE morticing machine No CBM2B 240v Pat tested G+

247 A CLARKE belt and disk sander No CS 4-6D 240v Pat tested G+

248 A WOODWISE scroll saw No PW18 240v Pat tested G

249 A little used TITAN Magnesium SDS hammer drill in orig case with attachments, Pat tested G++

250 A CHARNWOOD W370 pillar drill 240v Pat tested G+

251 A little used EINHELL jack hammer in orig box 240v Pat tested G++

252 A TORMEC 2000 wet grinder 240v Pat tested G+

253 A CLARKE 6" bench grinder 240v Pat tested G++

254 A PERFORMANCE POWER 5 speed bench drill 240v Pat tested G+

255 A little used AXMINSTER 350mm band saw 240v with accessories and instructions, Pat tested G++

256 A JET bench top oscillating spindle sander 240v Pat tested G+

257 Two RECORD No 05 1/2 fore planes G+

258 A RECORD No 2506 L & R side rebate plane G

(13)

260 Quantity of books G

261 Quantity of brass castors and other cabinet fittings G

262 Quantity of old keys G

263 A coffin smoother by BUCK with cupids bow bar and rosewood wedge, slight hammer damage at heel G+

264 Quantity of books G

265 English STANLEY Nos 4, 4 1/2, 5 and 5 1/2 some light rust G

266 Five No 4 smoothers by ACORN, RAPIER and OAYKAY, two with cracked handles G

268 Eight metal planes G

269 Eight chisels, 3 turning tools and a WODEN dowelling jig G

270 12 carving, gilding and furniture books G+

271 Four books by HASLUCK and two by ELLIS G

272 Cassells; Cyclopaedia of Mechanics 4 vols and the New Carpenter & Joiner 3 vols

273 Six turning tools, 6 mortice chisels, a 2" chisel by MATHIESON and 10 others G

274 Eight hammers G

275 A R/H side axe with decoration and another G

276 Two unused wood malt shovels with transfer decoration to blade G++

277 Three unused wooden spades G++

278 11 unfinished horn and antler handled knives (just require sharpening)

279 A LEATHERMAN combination knife and 9 others G++

280 A brass stemmed ebony mortice gauge by LOCKWOOD G+

(14)

282 Six dado planes, two lack iron and wedge G

283 A plough by SALMAN with interchangeable skate for circular work G+

284 Approx 60 pairs of new work gloves G++

285 50 taper, slotted and back irons G

286 Six various PRESTON reeders for spares and repairs

G-287 Two PRESTON hand reeders both with two fences G

288 Two PRESTON ovolo sash shaves G

289 Five paring gouges G++

290 Six carving tools with similar handles G+

291 A RECORD No 405 multi-plane in orig box G

292 A little used English STANLEY No 71 router complete in orig box G++

293 Two iron shoulder planes for restoration G

294 Eight metal spokeshaves G

295 English STANLEY Nos 75, 79 and 93 planes G+

296 Seven sixpenny braces G

297 A large quantity of drill bits G

298 Three ratchet braces, 3 wrenches, 3 mallets etc G

299 A 1" steel bullnose plane by PRESTON with rosewood wedge, some light rust G

300 A set of three little used mortice chisels by HILDICK with orig trade labels to beech handles G++

301 24 carving tools G+

302 A set of six small carving tools by MARPLES and two carving knives by FLEXCUT G+

(15)

304 Five bevel edge chisels and three others G

305 A ceramic whet stone and four other sharpening tools, trammels and other tools G+

306 15 carving tools and 20 rifler tools G+

307 Four moulding planes by Bristol makers: pair of sash planes by GREENSLADE, a rare plane by KENDALL and another G+

308 An unused toothing plane by J HILL G++

309 Three pairs of RECORD G cramps 4", 6" and 8" G+

310 A pair of mitre blocks and a bench holdfast by MARPLES and a No 50 vice by RECORD G

311 An engineers vice by RECORD No 3 with a pair of soft jaws G+

312 15 screwboxes 1/4" to 1 1/8" and five taps G

313 A sailmaker's kingwood seam rubber with ivory sole G+

315 250 small keys, need a clean G

316 Three drawknives G

317 Two cooper's round shaves G

318 A cooper's hand adze G

319 A STANLEY No 4 in orig poor box and a 4 1/2 G+

320 A STANLEY No 60 1/2 low angle block plane G

321 Three boxed oilstones and three others G

322 A box of tools G20

323 Seven metal planes, some rust G

(16)

326 Greenhalph; Joinery & Carpentry 6 vols and American Technical Society; Carpentry and Joinery 5 vols G+

327 Waterways Heritage and pattern books of Tools & Household Goods G+

328 An iron headstock and tailstock for a lathe G

329 Two steel rebate planes with rosewood infill G

330 Five block planes and a smoother

G-331 An iron panel plane and a Scottish smoother for restoration G

332 An iron rebate plane and a steel shoulder plane G

333 A recent adjustable 5/8" shoulder plane G+

334 A quantity of plane bodies etc

G-335 A box of tools G

336 An English STANLEY No 7 jointer G+

337 An English STANLEY No 10 rebate plane with composite handle G+

338 English STANLEY Nos 4, 4 1/2 and 5 1/2 G+

339 A smoother casting c/w brass lever G

340 A RECORD No 71 router complete G++

341 A SARGENT No 407 smoother for restoration G

342 Four engineer's squares by MOORE & WRIGHT G++

343 A beech jack plane and a smoother both with hardwood soles G++

344 A STANLEY No 55 with 4 boxes of cutters G+

345 A 10 Kg piece of ebony 20" x 9" x 4" allegedly salvaged from the North sea in 1977 G+

346 Five rolls of mahogany veneer, two white oak and one zebrano veneer G+

(17)

348 15 sheets of rosewood veneer 24" x 3 1/2" G+

349 16 sheets of rosewood veneer 26 x 3 1/2" G+

350 16 sheets of walnut veneer 19" x 6" G+

351 A wide half round and 3 other planes G

352 A brass stemmed ebony mortice gauge G

353 Two ebony and brass mortice gauges G

354 A carpet stretcher G

355 A little used USA STANLEY No 78 rebate plane with fence G++

356 20 baize, leather and cloth tool rolls for carving tools G

357 39 moulding planes G

358 200 assorted rasps and files G

359 Five rosewood levels G

360 Salaman; Dictionary of Woodworking Tools and 9 other books G+

361 A RECORD No 25 engineer's quick release vice G

362 A RECORD 1 ton vice G

363 Two engineer's vices by RECORD Nos 1 and 3 G

364 A RECORD No 53A quick release vice G+

365 A ZYLISS 4 in 1 vice in orig box G++

366 A pair of 0.5m and a pair of 1m cramps G++

367 A heavy duty 5' sash cramp and a 3' sash cramp G

368 A RECORD No 53 quick release vice G++

(18)

370 Four RECORD No 135 3' sash cramps G++

371 A pair of RECORD No 135 4'6" sash cramps G

372 Five sash cramps with one extension G

373 18 G cramps and 4 F cramps G

374 A RECORD No 52 quick release vice G+

374A RECORD Nos 0 and 2 vices G

375 RECORD No 0 and No 1 vices, two small machine vices and others G

376 14 G cramps 3" to 8" G

377 A RECORD No 53 quick release vice G

378 A pair of KENNEDY 28" sash cramps and two 18" extensions G

379 A pair of RECORD 54" sash cramps G

380 A pair of RECORD 54" sash cramps and a pair of 36" extensions G

381 A pair of RECORD 36" sash cramps G

382 Two RECORD T bar 42" sash cramps G

383 A pair of 8 tread WERNER step ladders 1.87m G++

384 A pair of 12 tread heavy duty platform step ladders 2.52m G+

385 26 assorted furniture books G+

386 18 books; antique furniture, chair-making etc G+

387 Ten books; wood finishes, veneering etc and 7 other books G+

388 16 books; routers, bench saws etc G+

389 Ten woodturning books etc G+

(19)

390A The following 18 lots are subject to VAT on the hammer price to EU countries

391 A coachdoor jack plane and 12 other wood planes G Plus VAT

392 A beech stail engine with boxwood screws G++ Plus VAT

393 A beech plough by FITKIN lacking wedge, screwstem plough by VARVILL and a plough body by CHAPIN all for referb. G Plus VAT

394 Quantity of metal planes for spares or repairs G- Plus VAT

395 26 chisels and gouges G Plus VAT

396 A LEWIN combination plane with cutters in orig box G Plus VAT

397 A 22" USA STANLEY No 0 level and plumb and another G+ Plus VAT

398 A box of tools G Plus VAT

399 Two STANLEY No 18 bevels, 59 dowelling jig, 93 rebate and a RECORD No 2506 rebate, some light rust G Plus VAT

400 An Ultimatum brass framed ebony brace by ROBERT MARPLES for restoration G- Plus VAT

401 A s/b mitre box saw with 26" blade, a little light rust G Plus VAT

402 17 moulders G Plus VAT

403 Quantity of bevels, squares and gauges G Plus VAT

404 Five patternmaker's planes for restoration G- Plus VAT

405 Quantity of veneering and other tools G Plus VAT

406 A European pad brace with boxwood head and one pod G+ Plus VAT

407 Two brass blow lamps and other tools G Plus VAT

408 A sash fillester by ATKINS and 8 other planes G Plus VAT

409 A wire/cable/bar cutter by IZUMI No S-20A G+

410 A watchmaker's lathe by LORCH SCHMIDT & Co, an adjustable bench clamp marked F.LORCH and a part staking set G

(20)

412 A vertical cross slide in fitted box G+

413 Various chainsaw blades, covers and gardening tools G

414 Six billhooks with replaced handles G++

415 A 1pt cast iron glue pot by KENRICK G++

416 A framing hammer by TIMMINS and two other hammers G+

417 Six brass topped ebony levels 6" to 10" G

418 Eight ebony and brass squares G

419 A 12" rosewood level with pierced brass top G+

420 A most unusual decorated bed spanner by TIMMINS for two nut sizes G++

421 Nine moving fillester's G

422 Eight boxed double and triple reed planes G

423 A USA STANLEY No 50, lacks cutters G

424 Three grease boxes G+

425 A large quantity of twist and other drill bits G

428 Quantity of engineer's tools G+

430 40 joiners dogs G

431 A steel soled bronze smoother with brass lever for restoration

G-432 An iron smoothing plane 11 1/2" x 2 1/4" with mahogany handle and wedge behind brass bar G

(21)

434 English STANLEY Nos 4 1/2 and 5 G+

435 English STANLEY Nos 4 and 5 some light rust G

436 A USA STANLEY No 71 router with three cutters and depth stop, a little light rust G

437 A quantity of rules, gauges and squares etc G

438 Five small Yankee pump screwdrivers and ten others G

439 Three rosewood and brass mortice gauges G++

440 Two brass topped levels by MATHIESON and two others G

441 A small hammer with tack lifter, a farrier's hammer and a nail hammer with nail slots G

442 A scarce MATHIESON sash and moving fillester with double depth stop and nicker irons G

443 Two sash fillester by MATHIESON G

444 A set of 8 plough irons by MATHIESON Nos 1 to 8 G

445 A nicely figured lignum carver's mallet with mahogany handle G+

446 A set of 3 Masonic gavels in lignum vitae with exceptional figuring and with ebony handles, beehive finials, ivory escutcheons to the base engraved with square, level and plumb-rule contained in brass bound mahogany case G+

447 A comprehensive kit of stonemason's tools incl. 60 chisels, bevels, combs, lead & rubber mallets, squares, compasses, maul etc G

448 A sailmaker's turned ebony seam rubber with whalebone inserts G+

449 A guarded sash scribing gouge and eight other chisels and gouges G

450 A brass blow torch and other tools G+

451 A b/b tenon saw by RICHARD IBBOTSON G+

452 A PRESTON L&R side rebate plane with fence G++

453 A STANLEY 45 with short arms and one box of cutters G

454 Two squares, level, rule and 3 gauges G

(22)

456 A forkstaff plane with craftsman added handle, two other planes and a 3/8" screwbox by BUCK lacks tap G

457 A sash fillester with d/t boxing by GREEN Pimlico and 30 moulders G+

459 19 metal spokeshaves mainly by STANLEY G+

460 36 books G+

461 Three stilson wrenches by RECORD 36", 24" and 18" G++

462 Seven metal shaves and 4 miniature shaves G+

463 Quantity of punches, padlocks, drawing instruments etc G

464 Jonathan Green-Plumb; Early Decorated European Tools and Frederick Oughton; Gringling Gibbons & the English Woodcarving Tradition and 5 other books G+

465 12 ratchet braces G

466 50 old chisels etc G

467 Two axe heads and 7 billhooks etc G+

468 26 chisels with composite handles by STANLEY and MARPLES etc G

469 A screwstem plough, moving fillester and four other planes all by VARVILL G

470 English STANLEY Nos 4, 4 1/2, 5 and 7 one cracked handle G

471 RECORD Nos 03, 04, 05 and 05 1/2 G

472 A large French axe and a carpenter's adze G

473 Two French axes with 6" and 7" edges G+

475 Quantity of metal plane spares

G-476 Three RECORD No 04 1/2 smoothers for restoration G

(23)

478 Three STANLEY ratchet braces and a Scottish iron brace G+

479 An early beech plough, maker's name over stamped

G-480 Quantity of spares for engineer's squares

G-481 A STANLEY No 45 with two boxes of cutters, nosing base and iron and a pair of No 12 H & R bases (lack irons) G

482 Three corner cramps by RECORD and WODEN and a mitre cutter by MARPLES all in orig boxes G++

483 A little used English STANLEY No 130 double end block plane and an 80 scraper both in orig boxes

484 Two unused English STANLEY Nos 803 and 805 hand drills both in orig boxes F

485 A combination boxwood rule, level and plumb and a brass topped ebony level both by RABONE and another level G+

486 A RECORD No 03 in orig box and an 04 stay set smoother G

487 15 packets of 10 x 8" padsaw blades F

488 RECORD Nos 050C and 078 both in orig boxes G++

489 Two small pine tool boxes G

490 A joiner's lockable, mahogany lined pine chest measuring 36" x 21" x 22" with 3 sliding sets of drawers with brass pulls, the panelled lid veneered in feathered mahogany, in very little used condition G++

491 A pine box with cobbler's lasts and other tools G

492 A pine box 38" x 17" x 17" with some tools G

493 A cabinetmaker's large pine chest 42" x 28" x 28" with four banks of drawers and false drawers over moulding plane wells, partly restored, includes quantity of thick veneer to complete the restoration

G-494 A small pine chest with some tools G

495 A pine chest for restoration 36" x 22" x 22" G

496 An engineer's 7 drawer tool chest by MOORE & WRIGHT containing numerous engineering tools G++

497 An engineer's 7 drawer chest with a few tools G+

498 A patternmaker's pine chest with 5 sliding trays with some tools G

(24)

500 A drawer type pine display case with glass top 28" x 30" x 4" G+

501 A glazed mahogany hanging display case 17" x 12" x 4" G+

502 A patternmaker's chest of tools inc. chisels, gouges, saws, shaves, planes and a brace G+

503 A patternmaker's pine chest measuring 40" x 19" x 17" with three mahogany trays with brass handles and varnished mahogany panelled lid G++

504 An engineers well used six drawer tool chest G

505 A hanging oak tool cupboard 15" x 24" x 7" the brass plaque with ARMY & NAVY on the inside and another label on the back, one drawer requires repair G+

506

A magnificent lockable joiner's chest, fully refurbished by the late master craftsman ERIC RAWLINGS, measuring 39" x 22" x 24"h. finished in Georgian green with rope handles. The interior with 6 sliding lidded trays in solid mahogany with flush brass pulls, the wells beneath lined in green baize. Th ...[more]

507 A STANLEY "Promobile" 53 litre tool chest G

508 An Ultimatum brass framed ebony brace by MARPLES also marked Hibernia. Head damaged G

510 Eight steel framed screwdrivers G

511 12 decorators scrapers with rosewood handles and six others G

512 A quantity of snips and grips etc G

513 20 old squares some rust

G-514 Eight English STANLEY smoothers some repainted G

515 Four English STANLEY smoothers one cracked handle G

516 Four English STANLEY smoothers G

517 13 stilson type wrenches etc G+

518 A ratchet hand winch by G.S. G+

519 Three JACOB'S chucks in orig boxes, morse taper arbours and other items G++

(25)

521 Six brass topped rosewood levels 9" to 12" three with brass bases G

522 A 12 gauge cartridge reloading machine by JEFFRIES Norwich and a device for rolled over cases G

523 Two brass topped ebony levels 9" and 10" both with sliding covers G

524 Five small STANLEY tools G+

525 Four bookbinder's unused slitting knives with ebony handles by ECONOME France and a knife G++

526 Four brass topped ebony levels by PRESTON 8" and 9" G+

527 Three brass topped levels by PRESTON G+

528 A decorative 11" ebony and brass level by BUIST G+

529 Two large brass blow torches and a sprayer G

530 Eight SWISS ARMY combination penknives by VICTORINOX G++

531 Four billhooks G+

532 Two unusual, large choppers 6" and 8" with replaced handles G

533 26 chisels and gouges G+

534 Five squares and 3 bevels G

535 11 hardwood rolling rules G

536 19 large old keys av. 5" long G++

537 Two stilson wrenches by RECORD 24" and 36" G++

538 Three decorative turnscrews 27" and 36" G+

539 A RECORD No 405 multi-plane in orig box G+

540 Two pairs of steel tipped brass trammels, one with pencil holder G+

541 Four pairs of steel trammel heads G+

(26)

543 ALTO'S 4505 mat cutting system for picture framing in orig box G+

544 Six paring gouges with boxwood handles G+

545 A little used rosewood and brass mortice gauge by MARPLES and four others G+

547 Two adzes, billhook and two others G+

548 English STANLEY Nos 6 and 7 G+

549 A SARGENT scraper G++

550 Nine hammers G

551 A coffin smoother by SPIERS with repaired rosewood infill G

552 STANLEY Nos 75 and 90J and RECORD Nos 075 and 076 all in orig boxes G

553 A selection of engineers taps and dies (not sets) in metric, BSF, BSW and UNC G+

554 Two 3/8" ratchets and 18 sockets G

555 20 Allen keys up to 27mm G+

556 Six engineers large adjustable reamers G

557 30 engineers morse taper reamers G

558 14 engineers hand drills G

559 A set of engineers metric tap and dies in fitted pine box G+

560 Two part tap and die sets G

561 A brass OWT router and a drawknife with 6" blade both with rosewood handles G++

562 A RECORD No 04 smoother with corrugated sole, crack to handle G+

563 A little used RECORD No 04 stay set smoother G++

(27)

565 An early STANLEY No 113 circular plane with side wheel adjuster G

566 A d/t steel smoother by SPIERS with brass lever, crack to handle and light pitting to sole G

567 A USA STANLEY No 67 shave with flat sole and orig fence G

568 A parallel sided smoother by SPIERS with brass lever pitted G

569 STANLEY Nos 4 and 5 G

570 Six STANLEY, RECORD and other block planes G

571 An Ultimatum brass framed ebony brace by Wm MARPLES with ivory ring in ebony head G++

572 Eight brass and two iron plumb bobs G

573 An adze by GILPIN G

574 25 assorted hammers and mallets G

575 An unused socket and spanner set by HALFORDS N

576 A little used RECORD No 07 jointer with orig decal on handle G++

577 18 adjustable wrenches G

578 Eight vices G

579 40 chisels and gouges G

581 A 10" ebony and brass spirit level by PRESTON with inlaid brass top, a brass inclinometer and 3 other levels G+

582 20 sockets 3/4" drive metric and Imperial to 50mm G

583 Four miniature planes for restoration

G-584 A pair of brass fire dogs, 3 fire irons, tongs, poker and shovel G+

585 A steel soled brass rebate plane 5 1/2" x 3/4" with mahogany wedge G+

(28)

587 A STANLEY No 62 reversible spokeshave G

588 A 1 1/8" iron bullnose plane undoubtedly by Spiers but not marked with rosewood wedge, little Ward iron remains G+

589 Knight: American Mechanical Dictionary 4 vols 1979 reprint No 489 of 600 limited ed with some 8000 engravings 3500pp G++

590 15 hammers G

591 A set of 13 RUSSELL JENNINGS spur auger bits in orig 3 tier box with part trade label, one hinge given up the ghost G+

592 An unused USA STANLEY No 71 router, body only, in orig tatty box F

593 A small hatchet by HULTS BRUK and another G+

594 Two 1/2" mortice lock chisels, a bruzz and 3 other chisels G+

595 30 chisels, gouges and carving tools G

596 14 auger bits, 12 centre bits and seven others G

597 Three pad saws in rosewood and beech G+

598 English STANLEY Nos 3 and 6 planes G+

599 A GTL brass smoother and a RECORD No 077A bullnose plane G+

600 Two iron smoothing planes one with repaired toe G

601 Two little used squares and a turnscrew by MARPLES a panel gauge and a pair of winding sticks G++

602 A 24" steel square and a brass mitre template both by SMALLWOOD G++

603 STANLEY Nos 78 rebate and 80 scraper planes G++

604 Two English STANLEY No 50's with cutters G++

605 Two STANLEY No 45 combination planes with one complete set of cutters with spares G+

606 Quantity of irons by STANLEY, CLIFTON etc and a VERITAS honing guide G

607 Four BUCK & HICKMAN catalogues 1930, 53, 58 and 71 G

(29)

609 Seven MAC, LAXTON, SPONS etc catalogues G

610 John Walter; Stanley Tools 1st ed. and 10 other books and price guides G+

611 Quantity of files and handles G

612 A slater's rip and a saxe both little used G++

613 Quantity of builder's trowels etc G++

615 Four ploughs and sash fillester and 7 other wood planes G

616 A Scottish iron brace, lever pad needs attention G

617 Quantity of abrasives and modern tools G++

618 Six pairs of cramp heads G+

619 A large, rare adjustable wrench by THURLEY No 3 Grip All with copy of patent G

620 A wheelwright's double sided hub cap wrench marked PETCH. Regd No 200272 G

621 Two drawknives, an adze and an axe head G+

623 A panel plane by VARVILL and 14 other wood planes G

624 A box of tools

G-625 A MATHIESON try plane, a PRESTON jack plane and another G+

626 A very early evergreen oak tonguing plane in v. poor condition

627 A RECORD No 020 circular plane G+

628 A DISSTON No 1 adjustable saw vice G+

629 A USA STANLEY No 110 block plane, English STANLEY Nos 66, 75 and 79 and a RECORD 722 router G+

(30)

631 A pair of 12" RECORD G cramps G+

632 A RECORD POWER No DMS26 hand morticer G++

633 A heavy duty cast iron mitre trimmer G+

634 A little used Record No 2506 side rebate plane with fence G++

635 17 paring chisels & gouges G+

636 20 gouges and carving tools, some pitting G

637 A RAPIER No 700 jointer with Stanley lever cap, and a WODEN No 4 G

638 A RECORD drill press, a bearing puller and a dowelling jig G++

639 A little used RECORD A65 chamfer shave G++

640 An English STANLEY No 71 router complete in orig poor box G+

642 Quantity of hollow square mortice chisels G+

643 Quantity of blacksmith's tools and blocks G

644 Two mahogany levels with double vials 2' and 4' G+

645 Quantity of cabinet fittings and hinges G

646 Five metal planes and other tools G

647 Two mallets and 3 hammers G

649 A heavy brass coffin smoother 8" x 3" with mahogany infill and cracked handle G+

650 A SARGENT No 407 smoother 8" x 2" with orig iron G

651 A little used RECORD No 2506 side rabbet in orig box, iron clamp replaced G

(31)

653 A Max-Min thermometer by T & H DOUBLET on ivory scale in fitted case G

654 A STANLEY Bedrock No 606 with English iron, crack to handle G

655 A Lancashire pattern hacksaw with 10" blade and two plumber's turnpins G+

656 A d/t steel coffin smoother by MATHIESON with rosewood infill, some pitting to sole G

657 A STANLEY No 45 with two boxes of cutters G+

658 A STANLEY No 50 complete with cutters in oak box G++

659 A USA STANLEY No 6 fore plane, slight crack to mouth G+

660 A RECORD No 06 fore plane G

661 A little used LEWIN multi plane with cutters in orig box G++

662 A GAGE No G7 jointer, crack to handle G+

663 English STANLEY Nos 75, 90J and 102 all in orig boxes G+

664 Little used RECORD Nos 043 and 044 planes both in orig boxes G++

665 An early USA STANLEY No 7 jointer with pre adjustable frog G+

666 English STANLEY Nos 4 and 5 both in orig boxes G+

667 A STANLEY No 45 Type 14 in orig wood box, lid replaced G

668 A RECORD No 405 multi plane with cutters in orig box G

669 Nine 2' four fold boxwood and brass rules G

670 A bookbinder's plough with vice by DRYAD Leicester G++

671 Two bevel edge chisels by MARPLES 1 1/4" and 1 1/2" G+

672 Five engineer's tools in orig boxes G+

673 Two squares, 3 levels and a pair of trammels G

(32)

675 A USA STANLEY No 59 dowelling jig (altered clamp screw) in orig box and a No 200 honing guide G+

676 A PRESTON No 1399P router and a small round shave G+

678 A RECORD No 07 Stay Set jointer G

679 15 mortice chisels G++

682 A USA STANLEY No 7 tall knob jointer with orig iron G++

683 A RECORD No 071 router with 3 cutters and depth stop G+

684 A USA STANLEY No 78 rebate plane, fence screw replaced G+

685 Seven TREND router cutters and a RECORD 1/2" collet extension G+

686 A four reed moulder by MOSELEY and 14 other moulders G+

688 A heavy duty lead trimmer by HARRILD London G+

689 A USA STANLEY No 65 chamfer shave with orig iron G++

690 A leatherworker's rosewood and brass pricking wheel with 3 spare wheels in head G++

691 Quantity of leatherworker's tools G

692 18 various sheath knives and penknives G

693 A PRESTON No 9 adjustable smoother, crack to handle G

694 Six little used STANLEY ratchet braces G++

695 A recent, little used set of 12 carving tools with ebonised handles in case G++

(33)

697 22 Yankee pump screwdrivers G

698 A parallel sided steel smoother with brass lever by NORRIS also stamped G Musgrave Lincoln, replaced ebonised infill and handle G

699 A little used 3/8" PRESTON No 1366 bullnose plane/rebate plane with rosewood wedge G++

700 A brass stemmed ebony mortice gauge and another ebony and brass gauge by IBBOTSON G++

700A This final section of 300 lots are Superior Quality Woodworking Tools

701 A little used USA STANLEY No 2 smoother with SW iron slight discolouration to sole o/w G+

702 A STANLEY No 4 low knob with SW iron G+

703 A STANLEY No 4 1/2 low knob smoother with orig iron G+

704 An unused English STANLEY No 5 fore plane with orig label in orig box F

705 A STANLEY Bedrock No 607 jointer with orig iron G++

706 A STANLEY No 7 type 7 low knob jointer with orig iron, chip off handle spur G+

707 A STANLEY No 7 low knob jointer G

708 A little used STANLEY No 10 1/4 rebate plane with good replacement tilting rear handle G++

709 A little used STANLEY No 98 side rebate plane G++

710 An unused STANLEY No 11 belt maker's plane, minor discolouration to sole F

711 A little used USA STANLEY No 220 block plane G++

712 A STANLEY No 113 circular plane with orig iron G+

713 A STANLEY No 20 Type 6 circular plane (1891-1892) with orig iron G+

714 A USA STANLEY No 71 router G++

715 A USA STANLEY No 71 1/2 router G+

716 A little used English STANLEY No 71 router with 4 cutters in orig box F

(34)

718 An English STANLEY No 79 side rebate in orig box G+

719 An English STANLEY No 80 scraper in orig box G+

720 An unused English STANLEY No 80 scraper with trade label in orig box F

721 A USA STANLEY No 130 double end block plane G+

722 A STANLEY No 95 edge trimming plane G++

723 A STANLEY No 81 scraper with rosewood sole G

724 A STANLEY No 66 hand beader c/w two fences and 6 irons G+

725 A STANLEY No 67 spokeshave with both fences G+

726 A STANLEY No 616 General Purpose Dolly in orig sealed package in orig box F

727 A STANLEY No 57 core box plane G+

728 A STANLEY No 80 scraper G++

729 A STANLEY No 66 hand beader c/w fences and cutters G+

730 A little used English STANLEY No 78 with trade label G++

731 Two STANLEY flat soled shaves G+

732 A very little used STANLEY No 50 combination plane in orig box F

733 A little used STANLEY No 50 combination plane in orig box F

734 A rare, unused, complete set of boxed cutters for a STANLEY 55 combination plane in orig box F

735 An American PLUMB Champion axe 1930 G

736 An Austrian wheelwright's auger 28" x 2 3/4" with smith's mark G+

737 An Austrian stake anvil with maker's mark 13" o/a G+

738 A large fine quality pair of French brushmaker's shears by GAUTER FRERES with boxwood handle and bench fixing attachment also stamped I. Loire Saint Gerrais G++

(35)

740 An 18c Austrian R/H side axe with makers marks and other decoration with 20" edge G+

741 An 18c Austrian R/H side axe with A.T. touch marks and other decoration with 24" edge G+

742 A rare b/b saw by A T MURREY Manchester (in 1894 he was a manager in the Mathieson factory see Simon Barley p435) G+

743 An unusually fine, little used keyhole saw by MARPLES with ebony handle F

744 A small ash bowsaw with 7" blade G+

745 A shapely boxwood bowsaw with ebony handles and 11" blade G++

746 A b/b d/t saw by BUCK Tot. Ct. Rd. G+

747 A b/b d/t saw by J. FROST Norwich G++

748 An unusually long b/b tenon saw with 16" blade by THOS. TURNER Sheffield G+

749 One for Bill, a b/b d/t saw with R GROVES & Sons, Made for J.GLEAVE & Son Manchester G+

750 Two DISSTON saws; a b/b tenon and a s/b dovetail G+

751 A recent, unused, 12" b/b tenon saw by SKELTON SAWS England with rosewood handle, this saw retails at £300 F

752 A set of 4 saws by GROVES Sheffield i.e. rip, panel, b/b tenon and keyhole saws in two sleeves G+

754

An unusual, very early, undoubtedly 16/17c or earlier, set of small tools on a display card comprising three very decorative button hole chisels, two small hammers with decorative heads and another, a pair of ornamental grips and a 3 1/2" iron rebate plane with later rosewood wedge, museum quality G ...[more]

755 A complete set of 11 ornamental turning tools No'd 2 to 12 by C NURSE London with rosewood handles G++

756 A rare set of 7 long bevel edge paring chisels by MARPLES 3/8" to 1 1/2" with boxwood handles G++

757 12 long paring gouges 3/8" to 1 1/2" with boxwood handles mostly by MARPLES G++

758 Three bevel edge paring chisels 1/2" to 1" and 9 long paring gouges 1/4" to 1 1/4" with attractive hardwood handles G++

759 A 1 1/2" paring chisel by MARPLES with attractive rosewood handle G++

760 A fine set of 20 carving tools with polished hardwood handles G++

761 A fine set of 12 carving tools with boxwood handles G++

(36)

763 16 carving gouges with attractive hardwood handles G++

764 A 7/8" bevel edge paring chisel by MARPLES with boxwood handle G++

765 A 2" bevel edge paring chisel by MARPLES with boxwood handle G+

766 A fine boxwood mallet with turned rosewood handle F

767 A 1/2" mortice lock chisel by MARPLES with boxwood handle G+

768 A little used 1 1/2" bevel edge paring chisel by MARPLES with boxwood handle F

769 A hefty boxwood handled 3/4" mortice chisel by WARD G+

770 14 ornamental turning tools by GEORGE ADAMS (3 missing from full numbered set) G++

771 A little used 1 1/4" bevel edge paring chisel by WARD with boxwood handle G++

772 An unusual 3/8" mortice lock chisel with boxwood handle G+

773 An unusually deep 1 1/2" gouge by IBBOTSON with ash handle G++

774 An early 1 5/8" gouge by JAMES CAM G+

775 A lignum carver's mallet with turned boxwood handle F

776 An unusual mahogany carver's mallet with integral handle F

777 A pair of French coachbuilder's fruitwood tailed flat and compassed rebate planes by GAUTIER FRERES Paris with 3" soles G+

778 A French coachbuilder's tailed fruitwood compassed rebate plane with 3" sole and a radiused rebate plane with ivory sole G+

779 A rosewood sliding box type chamfer plane 6" x 1 3/4" G+

780 An attractive rosewood OWT router F

781 A pair of boxed snipe bills G+

782 A fine and little used part set of 35 H & R's (No 15H missing from full set) and a matching set of 6 boxed beads 3/8" to Inch by GREENSLADE Bristol F

783 A small 7" beech dado plane with internal wood depth stop, wonderful quality F

(37)

785 A 17" handled badger plane by MOSELEY & SON G+

786 An unused beech smoother by MARPLES in orig box with 2 1/8" iron cabinet pitch F

787 A 3 7/8" wide moulder by GRIFFITHS Norwich G+

788 An unusual little used drawer bottom plane by I. LUND London F

789 A small pair of boxwood compassed and radiused rebate planes by EASTWOOD York 5" x 7/8" G++

790 A fine small boxwood compass rebate plane 5" x 1" by MUSGRAVE Lincoln F

791 A part set of 17 of 18 little used H & R's by NELSON Edgeware Rd No 10R missing G++

792 A set of 7 boxed beads 1/4" x 1" and a pair of sash planes by GARDNER Bristol G+

793 A good half set of 18 skew mouth H & R's by VARVILL York Nos 2 to 18 G+

794

Surprisingly unsold from our March auction a fine and rare shop display cabinet by WILLIAM MARPLES measuring 72" x 28" containing approx 60 Marples tools of the period, also displayed is a plaque of Leonard Coleman, Colemans were the local tool merchants in Coalville which closed in the 70's the too ...[more]

795 An early 19c boxed oilstone, the lid with 'IohnXHookeyX at horefeild 1828,' corner of case damaged G

796 An early barking spud with walnut handle dated W.D. 1826 G

797 A MILLERS FALLS spokeshave G+

798 A 10" SALTER brass spring balance to weigh 80 lbs G++

799 A fine and little used drawknife by ISAAC GREAVE with 12" edge and rosewood handles F

800 A little used drawknife by MARPLES with 6" edge and boxwood handles G++

801 A pair of violinmaker's brass purfling knives F

802 A 12" boxwood spokeshave by MARPLES G++

803 A MILLERS FALLS spokeshave with rosewood handles G+

804 A little used MILLERS FALLS hand vice with brace attachment and tools in rosewood handle F

(38)

806 An early 12" wrought iron lead ball extractor from a muzzle loading pistol G+

807 A very fine quality 19c German silver 16 bore shotgun chamber bristle cleaning brush by G & JW HAWKSLEY with rosewood handle and G.S. cover F

808 Two drawknives by GILPIN and HOWARTH with 7" and 10" edges G+

809 A French ebony and brass diamond tipped glass cutter with ivory inserts F

810 A fine French boxwood handled timber scribe F

811 A fine French horn handled timber scribe G++

812 An early kitchen chopper with decoratively turned rosewood and ivory handle G

813 An early pair of sugar nips G++

814 A limited edition set of three CORGI trucks advertising Stewart Spiers, Robert Sorby and John Rabone in orig fitted box F

815 A limited edition set of three CORGI trucks by T.Norris, Wm Marples and Frost & Barrett in orig fitted box F

816 A ceramic Royal Doulton figure "The Carpenter" 6" x 8"h. F

817 A 2' two fold boxwood and brass engineer's rule by PRESTON with brass slide, unusually with both I. Routledge Engineer Bolton and T. Wilkinson's Improved Rule Num G++

818 A PRESTON No 1388 quirk router c/w 3 fences and 3 cutters G+

819 A small PRESTON side rabbet plane G+

820 A PRESTON No 1399P router G+

821 A PRESTON No 1399P router G

822 A PRESTON No 1355 adjustable bullnose plane G++

823 A PRESTON No 1355 adjustable bullnose plane G

824 A rare combination double boxed beech sash and moving fillester by PRESTON (not in their catalogue) with double brass depth stops and nicker irons G

825 Two little used moulders by PRESTON 3 1/4" and 2 5/8" wide one with a dozen old worm holes F

(39)

827 Three PRESTON spokeshaves Nos 1373, 1377 and 1391 all with orig Preston irons G++

828 A very little used LIE NIELSEN No 9 mitre plane F

829 An unused LIE NIELSEN No 073 adjustable shoulder plane with instructions in orig box F

830 An unused LIE NIELSEN No 101 1/2 tailed convex sole palm plane with instructions in orig box F

831 An unused LIE NIELSEN No 102 bronze low angle block plane with instructions in orig box F

832 An unused LIE NIELSEN No 212B bronze scraper plane with instructions in orig box F

833 An unused LIE NIELSEN No 5 jack plane with instructions in orig box F

834 A pair of unused LIE NIELSEN b/b saw 15ppi rip and 16ppi crosscut both in leather cases with instructions in orig boxes F

835 A probably unused pair of CLIFTON concave and convex spokeshaves in orig boxes, minor discolouration spots to the chrome o/w F

836 A rare MILLERS FALLS No 8 smoother with 1 3/4" Record iron, crack to handle G

837 A little used MILLERS FALLS No 9 smoother with orig iron G++

838 A MILLERS FALLS No 10 smoother with orig iron G+

839 A MILLERS FALLS No 14 fore plane with orig iron G+

840 A MILLERS FALLS No 14 fore plane with orig iron G+

841 A MILLERS FALLS No 18 jointer with most orig iron G+

842 A MILLERS FALLS No 22 jointer with orig iron G++

843 A MILLERS FALLS No 9 smoother with orig iron G+

844 A RECORD No 010 rebate plane with orig decal on handle G++

845 A little used WODEN No W5 fore plane with orig decal F

846 A RECORD No 311 "3 in 1" plane with attachments G+

847 A RECORD No 073 adjustable shoulder plane

(40)

849 A little used RECORD No A151R round faced adjustable shave G++

850 A little used RECORD 042 3/4" rebate plane F

851 A RECORD No 044 plough plane with instructions in orig box G++

852 A probably unused RECORD No 04 smoother in orig blue box F

853 A RECORD No 03 smoother with orig decal on handle in orig box F

854 An unused RECORD No 778 improved rabbet plane F

855 A RECORD No 020 circular plane G++

856 A RECORD No 020 circular plane G+

857 A RECORD No 042 adjustable shoulder plane, minute chip at mouth o/w G++

858 Three BROWN & SHARPE catalogues Nos 29A, 31A & 32A and two updates G

859 William Marples; 1959 ed. tool catalogue with prices 450pp G++

860 William Marples; 1938 tool catalogue with prices 246pp G++

861 E.P.Barrus London; 1939 tool catalogue with prices incl Starrett, Stanley, Disston etc etc 600pp G+

862 Theodore R. Crom; 1989 Trade Catalogues 1542-1842 (a most interesting browse) 392pp G++

863 Arnold & Walker; Cat Nos 1 to 6 (complete set) G++

864 Maya Hambly; 1988 Drawing Instruments 1580-1980 206pp with dust jacket G++

865 Jane and Mark Rees; 2010 The Rule Book 230pp with dust jacket, and James M. Gaynor; Mr Marquois's Most Useful Pair of Scales F

866 Simon Barley; 2014 British Saws and Saw Makers from c1660 734pp G+

867 James Newlands; The Carpenter and Joiner's Assistant with 110 plates quarter leather rubbed and minor water stains G

868 David R. Russell: Antique Woodworking Tools, Their Craftsmanship from the Earliest Times to the Twentieth Century 528pp new unused in orig packaging N

869 A glazed Membership Certificate of the Amalgamated Society of Carpenters and Joiners, the frame 22" x 27"h F

(41)

871 A barrel shaped boxwood mallet with ash handle G++

872 An unusual jeweller's ? brass hammer with very decorative 9" steel handle G++

873 Four tack and planishing hammers G+

874 A planishing hammer by ULLATHORNE London and an upholsterer's hammer G++

875 A brass mallet with hardwood inserts G++

876 A very early and unusually heavy strapped claw hammer with ash handle weighing 3 3/4 lbs

G-877 An upholsterer's strapped hammer with decorative replacement ash handle G+

878 A little used 15" engineer's level by The LSS Co USA G++

879 A fine quality 7 1/2" rosewood level with brass top and base F

880 An unusual brass inclinometer by SHORT & MASON London dated 1927 with Crown over A.M. G++

881 A 12" ebony and brass rolling rule by ELLIOTT London with ivory scales G+

882

A fine and rare LORD'S desktop circular textile slide rule by ELLIOTT Bros. London No 21, the 10" dial with 4 scales two operated by handles on both side of the case and marked with Percentages and Reeds & Picks with removable hinged lid, all in excellent condition G++

883 A rare 16" ships engineer's slide rule by W.F.BROWN with Coal Consumption in Tons and Cwts of Ashes Per 24 Hours, Indicated Horse Power, Pitch of Propeller etc etc with instructions in orig carton G++

884 Two Customs & Excise 45" boxwood and brass cooper's head rods one by DRING & FAGE G

885 A cooper's one metre boxwood and brass bung rod by BENTLEY & TAYLOR stamped Diagonal Line Litres and a boxwood and brass head rod by DRING & FAGE G+

886 A 24" boxwood Gunter's scale rule (see The Rule Book p 193 for similar) F

887 A 16" boxwood slide rule by F.ROBSON Dean St. Newcastle on Tyne No 620279 a Speed & Power Scale for Merchant Vessels, Designed by T.C.Ballardie with Indicated Horse Power on Measured Mile Trial etc etc etc with paper scale to the reverse G++

888 A fine brass bound combination rule, level and square by STEPHENS & Co Pat Jan. 1858 F

889 A rare, double slide Horse Racing Rapid Odds Calculator 20" x 3" with ivoreene slides and instructions for use G+

890 A very rare boxwood double slide steam engine calculator 15" x 4" with Indicated Horse Power, Revolutions, Stroke etc etc G+

(42)

892 A very rare and unusual late 18c spring scale marked Patent No 3. This is one of only four known, one is signed T.Braby another is in the Snowhill Manor museum, this one weighs to 29 lbs. the others weigh different weights, probably the earliest English spring scale G

893 A rare 6" two fold boxwood and brass rule with folding sun dial and compass with brass cover F

894 A rare 6" four slide boxwood gauger's rule by EDWARD ROBERTS Old Jewry London. This 18c rule was altered c1824 to Imperial, the M.D. line was planed and re-struck with larger number stamps G+

895 A very rare 24" x 2 1/8" flat two fold boxwood and brass timber calculating slide rule by WELLINGTON & Son Crown Ct Soho London, also stamped Thick Stuff 12 Ins Broad, Treenils, Squ. Scantling, Ash Load, etc c/w two brass cursors, minor stains o/w G+

896 A rare 13" x 2 1/2" single slide boxwood rule by ASTON & MANDER London and Designed and Registered by C. Hoare York St. Southampton marked Round & Square Iron, Lead, Brass, Copper etc. etc. tiny chip from end of slide o/w F

897 A fine and very rare 2' two fold boxwood and brass Prestons Timber Dealer's Improved Rule with brass slide by Edw PRESTON

898 An unusual boxwood 15" three slide gauger's rule by RIX (1750-60) G

899 A 12" four slide 18c boxwood gauger's rule by EDWARD ROBERTS Dove Ct. Old Jewry London also stamped Thomas Church 1765 G+

900 An unusually nice quality 12" boxwood and brass clinometer by JAMES WHITE Glasgow in orig lined case (case requires attention) F

901 An early 18c 12" three slide gauger's rule G+

902 An extremely rare boxwood photographic exposure meter double slide rule 4" x 2" by W.H.Phillips & Sons Wood Green London t/w instructions for Speed List of Plates for Hand Camera Work etc in orig case F

903 A large 12" German silver proportional divider with turn down points by STANLEY London in orig case, incl. a bill of sale for the case for 8s 10d dated 1927 G++

904 A 12" pair of proportional dividers with fine adjustment by ELLIOTT & SONS London G+

905 A large set of drawing instruments mostly by CASARTELLI Manchester as illustrated in orig lockable mahogany box with key measuring 13 1/2" x 7" x 4" G++

906 A drawing set by HALDEN Manchester (with a few replacements) with ivory scale rule, sector and parallel rule beneath in orig rosewood box G+

907 A little used fine quality drawing set by RIEFLER in orig fitted case F

908 A most unusual drawing instrument by RIEFLER the arm can be fixed at 7 different angles and the base pushed along by a lever and ratchet system and retractable pins to hold it to the work in orig fitted case F

(43)

910 A triangular compass by T & H DOUBLET in orig case with Opticians to Guy's & St Thomas's Hospitals Moorgate St. Near the Bank of England F

911 Four boxed drawing instrument sets F

912 A quality pair of 4" pierced brass trammels with spring adjuster G+

913 A pair of USA STANLEY No 2 metal trammel points in orig box G++

914 A large pair of European fruitwood dividers with large brass wing nut and fittings 42" o/a, a few old worm holes G+

915 A pair of German silver trammel heads in orig mahogany box by STANLEY London and a folding compass in orig box F

916 A rosewood slitting gauge by WINGFIELED G+

917 A little used combination square and level by STARRETT Scotland in orig fitted box F

918 A combination square by BROWNE & SHARP G++

919 A little used combination square by STARRETT Scotland in orig box F

920 A RABONE No 1902 6" combination square in orig box G++

921 Two very little used rosewood and brass 6" square and sliding bevel by EVICTA F

922 A brass stemmed ebony mortice gauge with some orig finish G+

923 Two brass faced ebony and boxwood mortice gauges G

924 An unusually large, early mahogany plumb square 57" x 27" with lead filled bone bob G++

925 A very little used rosewood and brass mortice gauge by MARPLES F

926 A 8" proportional divider by A LEITZ Sanfrancisco in orig fitted case F

927 A small, fine quality 10" German silver pantograph with ivory scales in orig fitted case F

928 An unusual 19c inclinometer with compass by LAWRENCE & MAYO London in orig fitted case F

929 A 1" brass vernier scale with screw adjustable eye glass in orig box F

930 An 8" brass protractor by DOLLAND London F

(44)

932 A nice quality brass faced ebony marking gauge G++

933 A brass faced rosewood slitting gauge with brass stem G++

934 A slender mahogany marking gauge with brass stem G+

935 A probably unique d/t steel shoulder plane by SPIERS with rosewood infill and wedge 80% orig 1 1/8" Stewart Spiers snecked iron remains, all parts stamped 2, this "Art Deco" style plane previously sold in our Cat No 51 Lot 768 G++

936 A 1 1/2" steel soled gunmetal shoulder plane by SLATER London with rosewood infill and wedge G+

937 An unusual brass chariot plane 3 1/2" x 1 5/8" with upturned toe and shapely mahogany wedge behind decorative bar G+

938 An unusual early brass thumb plane 3 1/4" x 1 1/4" with scrolled front and decorative arrow design bridge with recent replacement rosewood wedge (the original comes with the plane) G

939 An unusually small 17/18c European musical instrument maker's iron mitre plane 7 1/2" x 2 1/4" with scrolled tote G+

940 A rare brass bullnose plane 3 1/2" x 1" by HOLLAND London unusually stamped on the front curve of the plane, chip off ebony wedge G

941 A very little used steel soled brass bullnose plane 3 1/2" x 1 1/4" with ebony wedge, marked "H" on the heel, with Gleave iron F

942 An unused KARL HOLTEY No A31 adjustable gunmetal thumb plane with d/t steel sole, figured rosewood infill and wedge and 1 5/8" iron in orig baize bag F

943 An unused KARL HOLTEY No A6 adjustable gunmetal parallel smoother with d/t steel sole and figured rosewood infill and handle with 2 1/4" iron in orig baize bag c/w spare iron F

944 An unusual, unused KARL HOLTEY No 982 Edition 12 adjustable steel smoother with rosewood knob and handle and 2 1/8" iron in orig baize bag F

945 A brass chariot plane 3" x 1 1/2" with rosewood wedge G+

946 A rare pair of coachbuilder's miniature gunmetal compassed sash ovolo moulding planes 3 1/2" x 1" G++

947 A brass bullnose plane 3 1/2" x 1 1/4" with boxwood wedge G+

948 A rare skew mouth iron rebate plane by BAYFIELD Nottingham 9" x 1 1/2" with rosewood infill and decorative inserts G+

949 A fine quality brass shouldering plane with polished beech handle F

950 A 1 1/8" iron bullnose plane stamped BUCK, but undoubtedly made by Norris, with rosewood wedge G

951 A little used double d/t boxed beech sash fillester by GRIFFITHS F

(45)

953 An unused miniature brass smoother 2 1/4" x 3/4" with rosewood handle and spare blade by VENTRA Loughborough in orig box F

954 An unused miniature brass smoother 2 1/4" x 3/4" by VENTRA Loughborough with rosewood handle F

955 A fine pair of miniature boxwood H & R planes 2 1/2" x 5/8" minor ink stain to one o/w F

956 A recent miniature boxwood try plane by BILL CARTER with rosewood wedge 5" x 1" F

957 A set of three violinmaker's brass planes 1 1/2" x 3/4" with brass wedges (2 with round soles) G++

958 Three small rustic boxwood spokeshaves 2 3/4" to 4 1/2" G+

959 A unused set of 5 rosewood and brass miniature squares and a combination marking and mortice gauge all by JOSEPH MARPLES, the 3" squares all set at different angles F

960

An extremely rare coachbuilder's circular beech plough plane by I SYM (mark G+) one of only 3 known, a flexible steel strip is attached to a curved fence which adjusts through two hinged brass slides at each end (illustrated Russell fig 614 and previously sold in our Cat. Nos 3 and 35) G+

961 A rare special purpose round by MICHAEL SAXBY (mark P 1730-75) G

962 Three large 9 7/8" rounds all obviously from the same H & R set but only one showing the MICHAEL SAXBY mark (partially o/stamped) G+

963 A very rare coachbuilder's tailed circular plough plane by GABRIEL (mark F 1770-1820) with brass and steel fittings G++

964 A French cooper's fruitwood truscan trasoir or circle cutter with elaborate iron adjuster for double sided blade, a few old worm holes G

965 An unusual 11" dated European fruitwood smoother with front tote, the escapement attractively carved with H, M. 1829 in Heart cartouche, the iron with screw adjustable back iron, some old worm G

966 An unusual 18c ash jack plane 20" x 2 1/2" with integral handle G

967 An 18c German boxwood smoother 6 1/2" x 2" with cupids bow decoration at escapement and decorative front tote (illustrated Russell fig 346) G+

968 An unusual 18c European two tone elm smoother 10" x 2" with front tote and carved decoration at escapement and wedge G

969 A rare early 10 3/8" moving fillester by OWEN (mark G- c1750) with external wood depth stop G

970 A 9 1/2"moulder by I COX (mark G- 1770-1812) G

971 A rare 10" moulder by IOHN PARTRIDGE (mark G) G

(46)

973 A most unusual 16/17c French or German, hand forged, locksmith's or armourer's cage head brace with fretted rotating grip. The frame terminates as a mythical dragons head at the pad with the mask of a boys face at the head, a centrepiece for any collection G

974 An early small Dutch ash brace with one pod G++

975 A Dutch kuikenboor G+

976 Two Dutch ash spykeboors G+

977 A fabulous, little used bow drill by J. BUCK London in most attractive figured rosewood with knurled brass fittings, as new F

978 A fine quality brass bowdrill with ivory and ebony fittings with matching ebony and ivory handled bow (chip to ebony as shown) G+

979 An Ultimatum brass faced ebony brace with ivory ring in ebony head G+

980 An unused set of 28 brace bits 1/16" to 1/2" by 1/64" by LEE VALLEY TOOLS in fitted case F

981 A 2' four fold architects ivory rule with German silver fittings by J.CASARTELLI & Sons Manchester with inside bevel edges nicely stamped J.Strange in orig poor case, very crisp F

982 A rare 17/18c ivory double slide gauger's 12" rule with Spheroid, Variety etc, early pinned repair to crack, not affecting use. G+

983 A little used 2' four fold ivory architects rule by W H HARLING London with German silver fittings and inside bevel edges, slight warp when half open o/w F

984

A fine HOLTZAPFFEL ornamental turning lathe with numerous attachments incl. ornamental slide rest, hand rest, ellipse chuck, universal cutting frames and other attachments as illustrated. This lathe was originally purchased by Earl Brownlow on 23rd December 1863 as a 5" Screw Mandrel lathe for £70 a ...[more]

985

A HOLTZAPFFEL lathe with attachments incl. cross slide, hand rest etc. with new mahogany 6 drawer under bed tool chest and replaced treadle. The pulley wheel has, in the distant past, been professionally widened to provide more speed at the work. The lathe No 971 was originally purchased by Mr S.P.B ...[more]

986 A pair of unused 39" overhead gear castings for a lathe, require finishing G

987 A watchmaker's quality brass lathe with cross slide and other attachments, minor rust spots o/w G

988 A brass Holtzapffel style goniostat sharpening tool fitted to work with an electric motor, goniostat G+

989 A fine quality kit of ornamental lathe tools by HINES Norwich as illustrated in later fitted oak case with drawer under G++

990 A HOLTZAPFFEL No 5 planishing hammer with rosewood handle G+

991 A very rare HOLTZAPFFEL centre finder with engine turn decorated gunmetal handle 9" o/a F

(47)

993 A late model NORRIS 2 1/8" iron G+

994 A little used 22 1/2" d/t steel NORRIS A1 adjustable jointer plane 85% orig early Norris 2 1/2" iron remains, minor discolouration spots o/w G++

995 A 16 1/2" d/t steel NORRIS A1 jointer, the plane has been neatly shortened from a 22 1/2" model, 40% orig early Norris 2 1/2" iron remains G

996 A probably unused late model 20 1/2" NORRIS A1 jointer only the tip of the orig 2 1/2" Norris iron honed F

997 An adjustable iron NORRIS A51 smoother with walnut infill and handle and Marples 2 1/4" iron G+