• No results found

Blood pressure waveform contour analysis for assessing peripheral resistance changes in sepsis

N/A
N/A
Protected

Academic year: 2020

Share "Blood pressure waveform contour analysis for assessing peripheral resistance changes in sepsis"

Copied!
17
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1 Pao scaled, offset and phase shifted to match Pfe. Solid, bolded regions of lines are those used in the linear least squares process
Fig. 2 Pfe scaled, offset and phase shifted to match Pvc. Solid, bolded regions of lines are those used in the linear least squares process
Fig. 3 Sample regions used in developing ROC curves, including a 30 min baseline, healthy (S1, S2,…) and septic (S56, S57,…) rolling 10 min samples, with a 1 min shift in start point each time
Fig. 4 A set of ε curves for four demonstrative metrics. εmin denotes the minimum distance from perfect identifiability, and τopt the threshold at which this occurs
+4

References

Related documents

The results of our study were marked difference with the report of El Bouzidi et al, in which domestication had not effect on antimicrobial activity of studies of Thy- mus

Rapid response of retinal pig- ment epithelial detachments to intravitreal aflibercept in neovascular age-related macular degeneration refractory to bevacizumab and

In this study a three-dimensional finite element model for endocardial radiofrequency ablation is presented. We investigated temperature distribution through the heart during

The results showed that the variation of materials and worm density of Lumbricus rubellus on vermicomposting greatly affect the biodegradation of organic waste

sua accumulazione ovvero di un processo ereditato dal passato contraddistinto da tempi lunghi e percorsi obbligati (Putnam (1993)). Mentre la tesi della dipendenza

In debates over privatization and global competition mixed Cournot oligopoly models have been used to show that the presence of a state-owned enterprise in the host country is

Keywords — Nonlinear process, Adaptive control, Gain scheduled Adaptive control, Ziegler-Nichols method, Two Tank Conical Interacting

The effectiveness of instrumentation setup and the loading were checked in the beginning by loading and unloading the frame with small loads (of the order of 1.5 KN at