• No results found

Finite Element Analysis of Single Plate Clutch by using Ansys

N/A
N/A
Protected

Academic year: 2020

Share "Finite Element Analysis of Single Plate Clutch by using Ansys"

Copied!
10
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1 and 2 shows the single plate clutch and friction plate. The average pressure on the friction surface                   Pavg= (Total force on friction surface) / (Cross -sectional area of friction surface)                                  P2-r2) =136392N/m2

References

Related documents

– interface between the Internet and the existing credit-card payment network ƒ CAs Cred it -card based sy stems / SET © Levente Buttyán 22 Overview of operation Internet

Također, po potrebi je važno osigurati pomagalo za držanje knjige, pomagalo za listanje knjige, pokazivače za praćenje čitanja, širi prostor za pisanje na uvećanom

In this study, although gender is conceptualized as a situational variable expected to weaken the negative impacts caused by abusive supervision on employee

l'he present thern~ochemical clata for hydrogen peroxide ancl its mixtures with water are recommenclecl as superseding previous values because they are based on

The study has drawn some key remarks from the entire analysis such as; First, it has proved that R&D distinct subsidies on quality demanded depends on

Think tanks are public policy research, analysis and engagement institutions that generate policy- oriented research, analysis and advice on domestic and international issues

Males Appearance Head of radius, distal phalanx of little finger, patella, proximal fibula, fifth metatarsal, middle phalanges of third and fourth toe, distal phalange

One of the major environmental and human health issues is heavy metal contamination of surface water. The persistent heavy metal contamination level in surface