• No results found

The Application and Operation Effect Analysis for Complex Tibial Plateau Fractures with 3D Printing Technique

N/A
N/A
Protected

Academic year: 2020

Share "The Application and Operation Effect Analysis for Complex Tibial Plateau Fractures with 3D Printing Technique"

Copied!
8
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 1. Comparison of key intraoperative parameters between group A and group B for complex tibial plateau fractures
Table 2. Comparison of functional recovery of knee joint between group A and group B after operation for complex tibial plateau fractures

References

Related documents

Variable severity; recurrent fractures; vertebral compression fractures; osteoporosis; variable degrees of deformity of long bones and spine (thoracolumbar kyphoscoliosis); bowing

Both the measured stabilization time and the measured temperature dependence of the permeation rate in- dependently indicate that the permeation can be described by a viscous

A&E: accident and emergency department; ACS: American Cancer Society; CNS: clinical nurse specialist; EMA: European Medicines Agency; ESMO: European Society for Medical

The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise

 When the atoms are in thermodynamic equilibrium, there are larger number of atoms in the lower state, implying that the number of absorptions exceeds the number of

The high R-squared values obtained for the linear equations and second degree polynomials fitted to annual rainfall-runoff series and seasonal rainfall-runoff series for all

Methods: The tissue hemoglobin index (THI), tissue oxygenation index (TOI), arterial oxygen saturation (pre-ductal SaO 2 ) and heart rate (HR) were recorded immediately after birth,

 The two DOF and three DOF models built using truck data in Simulink made understand the variation of the lateral velocity, yaw rate and roll of the truck for the