• No results found

Comparative Modal analysis of conventional spur gear with modified involute spur gear

N/A
N/A
Protected

Academic year: 2020

Share "Comparative Modal analysis of conventional spur gear with modified involute spur gear"

Copied!
5
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1: Boundary conditions & Meshed model
Figure 3: Pre-stress loading conditions
Figure 7: Pre-stress loading conditions
table no. 5 & 6 respectively , the natural frequencies of

References

Related documents

The authors have addressed the reason why the electric and magnetic couplings are out- of-phase when the resonators are arranged symmetrically along the coupling plane

Peripheral development : commercial exponents who do not have developer or partner roles typically work on the more peripheral areas of Moodle, which do not

This pattern of performance, however, appeared to be restricted to this one test, indicating possible interference with memory retrieval rather than with memory loss (due to

Drawing on literature from democratisation theory and peace and conflict studies, and applying it to two case studies, Bulgaria and the Republic of Macedonia, this thesis

If delegation of monetary policy to an independent central banker or an inflation contract are viable, they are a better solution to inflationary temptations than

Figure 2 shows the fibrous sample (HF1) image enhanced after using PICASA software.. It shows the fibre arrangement more

Since optimal control laws respecting control saturation constraints are nonlinear, the next step is to investigate the ability of the MLP to reproduce the well

It has been shown that the treatment of the crushed fruit pits powder with a suitable coupling agent has improved the performance of the powder- epoxy