• No results found

Analysis of Delamination in Carbon Fibre Reinforced Polymer Composite using Finite Element Method

N/A
N/A
Protected

Academic year: 2020

Share "Analysis of Delamination in Carbon Fibre Reinforced Polymer Composite using Finite Element Method"

Copied!
8
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 2. 3D model of uni-directional CFRP
Fig. 3. Delamination for drill diameter of 6 mm with point angle of 118
Table 2 that, with increase in feed rate and spindle speed von-mises stress increases and point angle also has influence As the stress increases, drilling induced delamination in composite material also increases
Fig. 4. Feed rate Vs Von-Mises stress

References

Related documents

Also in figure 6 the load curve for an optimized power supply and demand using Addressable Load-shedding equals the load curve for Grid Allocation/Availability. Demand above GA

International Journal of Scientific Research in Computer Science, Engineering and Information Technology CSEIT1833176 | Received 12 March 2018 | Accepted 24 March 2018 | March April 2018

Daniel, Samantha, "Immigrant and non-immigrant youth in Canada: Cultural orientation, ethnicity of friends, and life satisfaction among four ethnic groups" (2013)..

The International Consultation on Incontinence Questionnaire-Short Form, the Medical Research Council ’ s dyspnoea scale and the Australian Lung Foundation ’ s Feeling Short of

I t has already been shown in this article that for a hydrogen diffusion system to operate satisfactorily, efficient heating of the 23 per cent silver palladium

Rock stress and joint mechanical properties : Knowledge of in-situ stress and fluid pressure are critical for mod- elling reservoir behaviour.. The interaction between stress,

E-Governance refers to the delivery of national or local government information and services via the Internet Technology or other digital means to citizens