Consideration of Constraint in Plasticity Enhancement for Combined Primary and Secondary Stresses on Crack Driving Force
Full text
Figure
Related documents
stability in orthopedics, orthodontics, neurosurgery, and maxillofacial surgery. 7 Because pullout tests directed vertically, with forces parallel to the long axis of the
P3HT NF-sensor response to injections of 5 mL (cyan curve) and 10 mL (dark grey curve) of water vapor saturated at 25°C, using nitrogen as the carrier gas and the same
Evidence shows that remittances, trade openness and the level of financial development are important sources of economic growth while foreign direct investment may reduce long
According to the ion rejections results given in Table 5, there was a slight difference in ion rejections obtained from NF-270 and NF-90 permeates used as the feed solutions
Moreover, although the project hubot has more unique external integrators (11 externals and 3 inter- nals), internal integrators are responsible for managing the majority of the
An optimal decentralized control algorithm based on second order sliding mode controller (SOSMC) approach using extended kalman- bucy filter (EKBF) as an observer has been
– Main Bearings, Connecting Rod Bearings, and Wrist Pin Bearings all monitored with radar temperature..
It is shown through simulation results that the obtained time adaptive threshold and the proposed thresholding function is capable of enhancing the discriminability