• No results found

Multiple Target Test Generators for Optimizing the Atpg Process to Reduce Number of Test Sets

N/A
N/A
Protected

Academic year: 2020

Share "Multiple Target Test Generators for Optimizing the Atpg Process to Reduce Number of Test Sets"

Copied!
8
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1: Components of ATPG. Technology shrinking in the integrated circuit manufacturing process allowed the implementation of multiple processing units (cores) on a single chip as well as large amounts of on chip memory
Fig. 2. Dynamic Compaction Flow  COMPACTION AND RETARGET

References

Related documents

Program Goals: Students analyze the causes, characteristics and effects of the French Revolution.. BIG IDEA = -Liberty & Democracy -What is

So, when any accusation message is broadcast, first the nodes are required to check the data present in their PT, if they found that this is new accusation then that

formation is also possible for this process and will block access to active sites and thus reduce activity. This will re- quire regeneration of the catalyst and periodic

This review provides new and important information regarding the use of BCTs in eHealth PA for adults with CVD, highlighting the frequent use of the following

10.6 Switch the mode selector to the desired position and set the room thermostat to the desired temperature. 10.7 Your boiler is now ready

The initial biomarkers of ICIs were thought to be the presence, location and quantity of tumour- infiltrating lymphocytes (TILs), which were noted to have posi- tive prognostic

This study aimed to evaluate environmental sediment quality parameters (biological, chemical, sensory) and determine sediment quality parameters (organic matter, total nitrogen,

Although the impact of marketing and/or operations capability on a firm’s financial performance has been studied (e.g. Song et al., 2005; Terjesena et al., 2011; Nath et al.,