mY HOmE – Structured cabling system for the home sector
general features . . . 384
general rules for installation . . . 400
Wiring diagrams . . . 404
contents
m
Y H
O
m
E
S
Tr
U
C
TU
rE
d
C
a
B
Lin
g
S
YS
TE
m
F
O
r T
H
E H
O
m
E S
EC
TO
r
What is the structured cabling system for the home sector?
remote control device TV/SAT IPTV Telephone line Internet TV/SAT IPTVThe advancement of multimedia services, such as satellite TV and terrestrial digital systems, internet telephone systems and television, have highlighted the need for a specific cabling system inside the house, ensuring the distribution of the available services across various rooms, avoiding the implementation
of untested solutions, which may have unpredictable results. always attentive to technological development and to the above stated needs, BTicino offers an ideal and convenient solution for the creation of a “communication area” inside the distribution board, which centralises the devices for the distribution of the always attentive to technological development and to the above stated needs, BTicino offers an ideal and convenient solution for the creation of a “communication area” inside the distribution board, which centralises the devices for the distribution of the
TV/SAT system
Communication area inside the MY HOMe Flatwall distribution board
Telephone System, and the Television and data signals.
a “star” system is used to connect the cables from the distribution board to the user sockets in the various rooms of the house.
Communication area
MY HOME AUTOMATION SYSTEM APPLICATIONS
The home structured cabling system allows the integration of devices for the control of the mY HOmE functions. a multimedia Touch Screen can be connected to the data network to control all the home automation functions from a room of the house, allowing the user can take advantage of multimedia contents (audio and video) stored inside other PCs connected to the network.
By integrating the Web Server to the network, it will be possible to remotely control the mY HOmE system using a computer or mobile phone connected to the internet.
TV/SAT IPTV
TV/SAT IPTV
Multimedia Touch Screen 10”
TV/SAT IPTV IPTV TV/SAT Telephone system Data TV/SAT IPTV
m
Y H
O
m
E
S
Tr
U
C
TU
rE
d
C
a
B
Lin
g
S
YS
TE
m
F
O
r T
H
E H
O
m
E S
EC
TO
r
Access Gateway
The devices for the distribution of data, telephone and tv
xDSL fi lter with telephone distribution frame item F558 to separate the ADSL data line from the Telephone line. The Telephone line is available on 3 independent outputs.
Power supply item F552 it provides 9 V, 1.6 A, voltage for the supply of active devices.
Telephone distribution frame item F555
it can be used to distribute 1 telephone line to 8 diff erent sockets, or 2 telephone lines to 4 sockets.
TV/SAT IPTV
Web Server item F453AV
Patch module item F550C6 for patching inside the user socket wiring distribution board.
Wire and patch cord connections are concealed inside the distribution board and cannot be seen by the user.
Switch item F551
for the distribution of 1 data line to 4 diff erent rJ45 sockets.
TV/SAT IPTV TV/SAT IPTV
m
Y H
O
m
E
S
Tr
U
C
TU
rE
d
C
a
B
Lin
g
S
YS
TE
m
F
O
r T
H
E H
O
m
E S
EC
TO
r
application examples:
telephone, data, TV/SaT, iPTV and video door entry system
TV/SAT IPTV TV/SAT jacks rJ45 sockets TV/SAT IPTV TV/SAT IPTV rJ45 sockets IPTV TV/SAT IPTV
This drawing shows the possibility of distributing, in addition to telephone and data signals, also the iPTV service TV/SaT and digital signals.
in addition, thanks to the integration
of the home wiring system with the mY HOmE video door entry system using the TV modulation device, it will be possible to display a call from the video door entry system entrance
panel on the television set. in order to make the iPTV signal available to the corresponding decoder, it will be necessary to install, inside the communication distribution board, of a special gateway access device supplied by the Supplier of the iPTV service.
Flatwall Flatwall
MY HOMe video door entry system
The following devices are installed inside the distribution board:
gateway access supplied by the supplier of the iPTV service.
data switch item F551.
modulator item F442.
TV/SaT distribution frame item F553.
Telephone distribution frame item F555.
Patch modules item F550C6.
xdSL fi lter with telephone distribution frame item F558.
m
Y H
O
m
E
S
Tr
U
C
TU
rE
d
C
a
B
Lin
g
S
YS
TE
m
F
O
r T
H
E H
O
m
E S
EC
TO
r
application examples: telephone, data and integration
with mY HOmE for local and remote function control
This drawing shows the possibilityof installing a data and telephone distribution system integrated with the mY HOmE system, for local and remote function control.
integration is made possible by using the Web Server device, which operates as a bridge between the BUS wiring of the mY HOmE system, and the data network wiring system.
This solution makes it possible to use the 10” multimedia Touch Screen to control the home automation functions, and to share the
multimedia content of other storage devices connected to the data network.
Multimedia Touch Screen 10”
TV/SAT IPTV TV/SAT jacks rJ45 sockets TV/SAT IPTV TV/SAT IPTV rJ45 sockets
remote control device
if the network has an internet connection, it will be possible to control all the home automation function also remotely, using a PC, or a mobile phone.
The following devices are installed inside the distribution board:
modem item F444U4 or, in alternative, gateway access supplied by the supplier of the adSL service
Web Server F453aV
data switch item F551
DSL InTerneT SerVICe
TV/SaT distribution frame item F553
xdSL fi lter with telephone distribution frame item F558
Telephone distribution frame item F555
Patch modules item F550C6 Flatwall
m
Y H
O
m
E
S
Tr
U
C
TU
rE
d
C
a
B
Lin
g
S
YS
TE
m
F
O
r T
H
E H
O
m
E S
EC
TO
r
Home structured cabling requires a STar type structure: the user socket connection cables meet in a central point called “star centre” or communication area.
This is the area where the
connections with the access networks for distribution of various services (Telephone system, TV/SaT…),
as well as all active information management and distribution devices, are located. in general, the communication area is created by grouping together all the devices in an appropriate distribution board to be installed near the general distribution board of the home.
in new or refurbished homes, where the mY HOmE FLaTWaLL solution has been selected as the general electric distribution board (for example, to also centralise the mY HOmE devices), the communication area must be created inside the distribution board itself.
Communication areas inside the MY HOMe FLATWALL distribution board
User socket
User socket
User socket
Cabling structure and components for the home sector
in addition to the distribution board the following items can be identified:
Signal handling and distribution devices;
Cables for the connection of the devices to the various user sockets;
User sockets with connectors split by service type. User socket User socket User socket
m
Y H
O
m
E
S
Tr
U
C
TU
rE
d
C
a
B
Lin
g
S
YS
TE
m
F
O
r T
H
E H
O
m
E S
EC
TO
r
Cabling structure and components for the home sector
THE DEVICES FOR THE DISTRIBUTION OF SIGNALS
The management of the data network
To ensure the connection of several computers to the data network and the sharing of the internet connection, the “Switch” device, item F551, must be used.
The internet network connection
Connection to the internet network is performed using the router modem item F444U4.
Switch item F551 Patch modules item F550C6
ADSL modem item F444U4
WIRING DIAGRAM
TV/SAT IPTV TV/SAT IPTV
rJ45 socket rJ45 socket
Switch item F551 Patch modules item F550C6
The device has and adSL line input and 4 outputs for the connection of the corresponding Lan cables. in alternative to the above model, the modem supplied by the internet Service Provider (iSP) can also be used.
L4665L20/L40 patch cord
Switch item F551
For a detailed description of the listed devices see the corresponding technical sheets . For a detailed description of the listed devices see the corresponding technical sheets . For a detailed description of the listed devices see the corresponding technical sheets .
The management of telephone signals
The telephone signal does not require any special management devices, with the exception of a special filter, item F558, which separates the telephone signal from the digital signal for the adSL modem. The device has 3 filtered outputs for the connection of three telephone jacks. For more complex systems, a distribution frame, item F555, can be used to replicate one telephone line to eight output lines intended for the respective telephone connectors. WIRING DIAGRAM XDSL filter item F558 Patch modules item F550C6 Patch modules item F550C6 TV/SAT IPTV TV/SAT IPTV rJ45 socket rJ45 socket L4665L20/L40 patch cord
For a detailed description of the listed devices see the corresponding technical sheets .
XDSL filter item F558
m
Y H
O
m
E
S
Tr
U
C
TU
rE
d
C
a
B
Lin
g
S
YS
TE
m
F
O
r T
H
E H
O
m
E S
EC
TO
r
Cabling structure and components for the home sector
The management of the television signals
The distribution of the television signal (both terrestrial and satellite), to several TV jacks, is entrusted to the TV/SaT distribution frame, item F553, which has one input connector and six output connectors. if the aerial system provides mixed analogue and digital signals, only one device will be needed. if, on the other hand, the system provides two separate signals, one analogue and one digital, with separate cables, one distribution frame and the corresponding TV connectors shall be used for each signal. WIRING DIAGRAM TV/SAT IPTV TV/SAT IPTV TV/SAT IPTV TV/SAT IPTV TV/SAT IPTV
TV/SAT distribution frame item F553 TV/SAT IPTV TV/SAT system TV/SAT jacks TV/SAT jacks TV/SAT jacks TV/SAT jacks SAT decoder TV/SAT jacks
TV/SAT distribution frame item F553
Signal patching
With this operation it is possible to reconfigure over time the correspondence between the user sockets and the devices in the communication area. it is performed using special patch modules, item F550C6, to which the wiring cables are connected.
The connection with the devices is performed using patch cords, items L4665L20 and L4665L40.
The special geometrical conformation of the device (vertical cable input) means that the wiring and the patch cords can be concealed inside the communication distribution board.
WIRING DIAGRAM
Switch
item F551 Telephone distribution frame - item F555 Patch modules item F550C6 Patch modules item F550C6 TV/SAT IPTV TV/SAT IPTV rJ45 socket rJ45 socket L4665L20/L40 patch cord
Patch modules item F550C6
m
Y H
O
m
E
S
Tr
U
C
TU
rE
d
C
a
B
Lin
g
S
YS
TE
m
F
O
r T
H
E H
O
m
E S
EC
TO
r
THE WIRING
in home structured cabling systems two types of cables are used:
coaxial cables for the distribution of the television signal;
4 pair twisted cable for the transmission of telephone and data signals.
The CEi 306-2 (*) guide calls for a so-called “basic” wiring characterised by 1 cable with 4 symmetrical pairs and 1 Coaxial cable destined to the corresponding rJ45 type connectors for data transmission, and to coaxial connectors for the television. The same guide recommends a so called “advanced” wiring, characterised by 2 cables with 4 symmetrical pairs for data/telephone services, and 2 coaxial cables for TV signals.
COAXIAL CABLE
The coaxial cable consists of a central rigid or flexible conductor, insulated, using dielectric material, from an external cylindrical conductor called “shield”.
CABLE WITH 4 SYMMETRIC PAIRS
Used for data and telephone transmission, this cable consists of 4 pairs of twisted cables. it is available with (STP, S-FTP) or without (UTP) external shield. For both, the characteristic impedance is 100 Ohms.
Shielded cable (STP) Unshielded cable (UTP)
The performance in terms of maximum frequency of the transmitted signal, is expressed in categories as below:
Category 5: data transmission up to 100 mbit/s.
Category 5e: data transmission up to 1000 mbit/s (100 mHz).
Category 6: data transmission up to 1000 mbit/s (250 mHz).
Category 6a: data transmission up to 10 gbit/s (500 mHz).
due to the current transmission requirement, the CEi guide recommends 5e category cables. However, in order to prepare the network for future applications, category 6 or 6a cables are recommended. The typical use requires capping with rJ45 connectors.
Cavo COAXIAL
Unshielded cable (UTP) Unshielded cable (UTP)
nOTe (*): CeI 306-2. Guide for
telecommunication and multimedia distribution wiring inside residential buildings.
The Coaxial cable for Television applications has a characteristic impedance of 75 Ohms and a diameter between 4 and 7 mm.
Cabling structure and components for the home sector
L4279C6 nT4279C6
THE USER SOCKET
in the system configuration described so far, each branch of the “Star centre” reaches, and ends in, a user socket normally consisting of one or more connectors.
There are two types of connectors for the home data network:
TV signal coaxial connector.
rJ45 standard connector with 8 contacts for telephone system and data signals.
For special systems (for the distribution of three services at the same time, BUS, Telephone and data, within the same user socket) “multifunction” type connectors are used. For the wiring use the cable item L4668Cm. Use this connection only to complete the system called “multimedia wiring” shown in the chapter “Wiring diagrams”.
L4202D
L4269F
nT4270
L4270
TV COnneCTOrS
Shielded TV and SAT COnneCTOrS in die-cast enclosure
nT4279C6 Data network and telephone system connectors
L4269F HC4269F HS4214D n4210D
m
Y H
O
m
E
S
Tr
U
C
TU
rE
d
C
a
B
Lin
g
S
YS
TE
m
F
O
r T
H
E H
O
m
E S
EC
TO
r
main requirements
DESIGN CRITERIA
during the design of the home data network system, it is important that the following aspects are defined in orderly sequence:
Functions required (data, Telephone system, TV);
Selection of the installation solutions based on the features of the building. irrespective of the type of system and the required functions, it is necessary that the PLanimETrY, as well as a gEnEraL FUrniTUrE PLan, are made available to the installer. it must also be considered that on a design and installation point of view the creation of a home data network system is not very different from that of a traditional electric power system.
STANDARDS
The design and installation of the home data network system must be performed following the indications and requirements contained in the following documents:
CEI 306-2: guide for
telecommunication and multimedia distribution wiring inside residential buildings.
CEI 64-100/1: residential building.
guide for the presetting of the infrastructures for electric, electronic, and communication systems. Part 1: Building risers
CEI 64-100/2: residential building.
guide for the presetting of the infrastructures for electric, electronic, and communication systems. Page 2: dwellings (apartments)
CEI EN 50173-1: information
technology - Structured cabling systems
Part 1: general requirements
CEI EN 50173-4: information
technology - Structured cabling systems. Page 4: Homes.
DEFINITION OF THE FUNCTIONS REQUIRED
The design of the data network system requires a good knowledge of the multimedia functions to be installed around the home. as a way of example, attached is the table of CEi 306-2 guide. For each application this table shows the features of the corresponding wiring setup to be implemented for the multimedia network.
* In order to take advantage of the fl exibility of the home wiring system, it is recommended that also for the telephone system service a 4 symmetrical pair cable is used, connected to a RJ45 socket, instead of the traditional twisted pair connected to the RJ11/12 socket.
In this case, the same rJ45 socket used to connect the pc to the local ethernet network can be reused, for example, to connect a standard analogue telephone to the telephone line, without any intervention required on the horizontal wiring. The only action needed will be the patching of the termination of the corresponding cable in the Star centre, moving the connector from the ethernet switch to the telephone distribution frame. To connect a telephone unit with rJ11 socket to the rJ45 socket, use the corresponding cable rJ11/ rJ45 item L4664.
CABLES SERVICE BAND CABLE USED
TV
(terrestrial + satellite) 47...2150 Mhz COAXIAL
Traditional telephone system* 1 Mhz 1 symmetric pair
LAN 1 Gb/s 4 symmetric pairs
Selection of the cable by application type
Creation of the communication area
ZONE FOR HOME WIRING DEVICES
This area is occupied by the patch modules connecting the user sockets to the Star centre, as well as all devices for the appropriate distribution of the various signals to the sockets themselves.
On an installation point of view, it is recommended that the communication area is split in two specific zones:
zone for the installation of gateway access devices
zone for home wiring devices.
ZONE FOR GATEWAY ACCESS DEVICES
This area is occupied by all active and non active equipment, with corresponding wiring for the connection of the electric services coming from the outside of the home, such as:
Telephone line;
TV/SaT system from the central unit downstream the aerials. an example of active device for this area is the adSL modem with integrated switch, and if applicable the gateway device for the signals coming from the optic fiber network. On the other hand, a non active device can be the filter for the separation of the telephone signal from the adSL data signal.
For the operation of active devices, it will be necessary to allow for 230 V power supply sockets, with the corresponding disconnection and
it must be considered that both devices and wiring of the telephone and data networks must be kept separate from the 230 V electric power supply devices and wiring. it will therefore be necessary to also allow for partitions or similar solutions for the separation of the systems.
Communication distribution board User socketsUser sockets
Wiring
Patch cables
residential access equipment (Gateway)
230 V disconnection and protection devices Patch modules
Distribution Frames and Switches
m
Y H
O
m
E
S
Tr
U
C
TU
rE
d
C
a
B
Lin
g
S
YS
TE
m
F
O
r T
H
E H
O
m
E S
EC
TO
r
Positioning of the user sockets
it is recommended that 2 rJ45sockets (data and telephone) and 1 TV jack are installed in each room, every 3.75 m of the perimeter of the room (ref. CEi En 50173-4). The number of sockets in each room must, in any case, be such that from each zone it will be possible to reach the user point using a PC or telephone connection cord not longer than 5 metres without causing any transit problems inside the room. Obviously, this requirement must be assessed also taking into account the current or future position of the furniture, so that
the use of of the user sockets is not prevented by the positioning of the furniture. For the power supply of the connected devices, on the side of each user socket one or more 230 V power supply sockets must
also be installed, inside dedicated device holding boxes. if no precise design is available, the miminum requirements recommended for each standard room of the house could be as follows:
example of a possible home wiring system. example of a possible home wiring system. example of a possible home wiring system.
Star centre distribution board
DIAGRAM
For the connection of telephone devices with rJ11 connectors to rJ45 type sockets, use the rJ45/rJ11 adapter cable, item L4664.
ROOM TYPE DEVICES TO BE USED
Kitchen 1 RJ45 socket (on worktop level) + 1 TV/SAT jack
Main bedroom 3 RJ45 sockets (2 of which for the telephone on bedside cabinets) + 1 TV/SAT jack
Second bedroom 2 RJ45 sockets (bedside cabinet and desk) + 1 TV/SAT jack
Living / sitting room 2 RJ45 sockets + 1 TV/SAT jack
Study 2 RJ45 sockets
Tavern 2 RJ45 sockets + 1 TV/SAT jack
Gym 1 RJ45 socket
Technical room
(laundry room/boiler room, etc.)
1 RJ45 socket
User socket wiring
Cat. 6 UTP Connectors
in order to ensure access to all types of services (data, telephone system, and TV), the user socket must be fitted with rJ45 connectors (female type), and coaxial connectors for aerial systems, with electric features compatible with the ones of the corresponding connection cables.
RJ45 CONNECTORS
For the connection of modular rJ45 connectors to the 4 symmetric pair data cable, two solutions can be implemented, regulated by Tia/Eia 568a or Tia/Eia 568B standards respectively.
These two standards are completely similar in terms of performance and supported applications. The only difference is that pair 2 and pair 3 are switched.
The main trend is to install systems using the Tia/Eia 568B standard connection requirements.
By using this type of wiring, both the signals for the distribution of the data
TV COAXIAL SOCKET
For the distribution of TV services in the residential network wiring system it is necessary to install the Coaxial cable, which must be connected, in the user sockets, to the corresponding F or iEC type TV jack (male type). The socket must be compatible with the cable features and must assure the transmission, without relevant attenuation, of the television signal with frequencies up to 2.150 gHz. BTicino has a wide service and those for the telephone
system will be available on all the pins of the connector, as shown in the following table.
1 2 3 4 5 6 7 8
EIA 568 B
rJ45 connector cablato secondo lo standard TIA/eIA 568B.
TV coaxial socket
From the table it is clear that pins 7 and 8 are not used. However, there are special applications that also require these pins.
RJ45 APPLICATION PIN NUMBER
1 2 3 4 5 6 7 8 Telephone system (analogue digital) ISDN Ethernet 10/100/1000 Mps
m
Y H
O
m
E
S
Tr
U
C
TU
rE
d
C
a
B
Lin
g
S
YS
TE
m
F
O
r T
H
E H
O
m
E S
EC
TO
r
System with 3 active telephone jacks and 4 active data sockets
F444U4 PWR DC IN LINE LINE RESET FACTORY LAN 1LAN 3 1 2 3 4 LAN 2LAN 4 ADSL INTERNET PLT1 a b IN a b OUT LINE PRI 1- 2 F550C6 F550C6 F444U4 346020 230 Vac F558 PLT1 POTS+ADSL external telephone line STAr CenTre rJ45 sockets (*) (*) (*) (*)ITEM DESCRIPTION DIN MOD. QUANTITY F444U4 F558 PLT1 F550C6 L4665L40/L20 See catalogue ADSL modem ADSL filter Protect. against lightning Patch module Patch cable RJ45 connector 10 2 2 1 1 1 1 11 7 11 nOTe (*): sockets preset for future patching
System with 6 active telephone jacks and 6 active data sockets
F444U4 PWR LINE RESET FACTORY LAN 1 LAN 3 1 2 3 4 LAN 2 LAN 4 ADSL INTERNET PLT1 a bIN a b OUT Power L1 L2 L1 L2 L1+L2 L1 PRI 1- 2 F550C6 F550C6 F444U4 346020 230 Vac F558 PLT1 STAr CenTre F550C6 F550C6 F550C6 230 Vac F551 F555 F552 rJ45 sockets POTS+ADSL external telephone line (*) (*)m
Y H
O
m
E
S
Tr
U
C
TU
rE
d
C
a
B
Lin
g
S
YS
TE
m
F
O
r T
H
E H
O
m
E S
EC
TO
r
PLT1 a b IN a b OUT LINE Power L1 L2 L1 L2 L1+L2 L1
System with gateway access, 6 telephone jacks,
4 data sockets, 1 iPTV jack, and 6 TV/SaT jacks
F550C6 F558 PLT1 STAr CenTre F550C6 F550C6 230 Vac F551 F555 F552 Gateway access (*) rJ45 sockets POTS+ADSL external telephone line IPTV output
ITEM DESCRIPTION DIN MOD. QUANTITY (*) F558 PLT1 F555 F553 F551 Access Gateway ADSL filter Protect. against lightning Telephone distrib. frame Hub TV Switch 10/100 Mbs 2 2 4 4 4 1 1 1 1 1 1
ITEM DESCRIPTION DIN MOD. QUANTITY F550C6 F552 L4665L40/L20 See catalogue See catalogue Patch module Power supply Patch cable RJ45 connector TV connecor 1 1 11 1 14 11 6 nOTe (*): Device supplied by the supplier of the IPTV service
PLT1 a b IN Power L1 L2 L1 L2 L1+L2 L1 F550C6 F553
IPTV decoder SAT receiver
Television set with integrated DTT decoder (if the television is not fitted with one, connect it to the TV jack using an external DTT decoder)
TV jacks type 4214D
m
Y H
O
m
E
S
Tr
U
C
TU
rE
d
C
a
B
Lin
g
S
YS
TE
m
F
O
r T
H
E H
O
m
E S
EC
TO
r
System for distribution of telephone system, data network, TV/SAT
signal and integration with MY HOME video door entry system
PLT1 a b IN a b OUT LINE L1 L2 L1 L2 L1+L2 L1 F444U4 PWR DC IN LINE LINE RESET FACTORY LAN 1LAN 3 1 2 3 4 LAN 2LAN 4 ADSL INTERNET Power DC - In RS 1 RS 2 F442 P 01 2 34 56 789 01 2 34 56 789 PWR OUT IN SCS PRI 1- 2 PRI 1- 2 F550C6 F558 PLT1 STar CenTre F550C6 F550C6 230 Vac F551 F555 F552 rJ45 sockets F444U4 346020 230 Vac POTS+aDSL external telephone line 408
PLT1 a b IN a b OUT L1 L2 L1 L2 L1+L2 L1 F444U4 PWR LINE RESET FACTORY LAN 1LAN 3 1 2 3 4 LAN 2LAN 4 ADSL INTERNET Power DC - In RS 1 RS 2 F442 P 01 2 34 56 789 01 2 34 56 789 PWR OUT IN SCS PRI 1- 2 PRI 1- 2 F553 DTT decoder TV jacks 346020 230 Vac F442 B variant Down from aerial
TO THe MY HOMe VIDeO DOOr enTrY SYSTeM
TV central unit IF/IF central unit Multiswitch
type 4214D TV SAT receiver
m
Y H
O
m
E
S
Tr
U
C
TU
rE
d
C
a
B
Lin
g
S
YS
TE
m
F
O
r T
H
E H
O
m
E S
EC
TO
r
System with Wireless router modem external to the
distribution board for the management of 4 data sockets
PLT1 a b IN a b OUT LINE Power L1 L2 L1 L2 L1+L2 L1 F550C6 PLT1 F550C6 F550C6 230 Vac F551 F555 F552 rJ45 sockets 346020 rJ45 sockets POTS+ADSL external telephone line
Note (*): If the Modem has an rJ11 input connector use the
L4664 adapter cable
Modem (*)
In OUT
STAr CenTre
ITEM DESCRIPTION DIN MOD. QUANTITY F558 PLT1 F555 F551 F552 F550C6 L4665L40/L20 See catalogue ADSL filter Protect. against lightning Telephone distrib.frame Switch 10/100 Mbs Power supply Patch module Patch cable RJ45 connector 2 2 4 4 1.5 1 1 1 1 1 1 12 12 12 410
integration of the data and telephone system network
with the mY HOmE system, for local or remote function control
PLT1 a bIN a b OUT F444U4 PWR LINE RESET FACTORY LAN 1 LAN 3 1 2 3 4 LAN 2 LAN 4 ADSL INTERNET Power PRI L1 L2 L1 L2 L1+L2 L1 F453AV 0319 06 USB USB ETH SCSAV IN SCSAV AV OUTSCS SCSAI DC SpeedFullLinkAuxSystem
PRI 1- 2 F550C6 PLT1 F550C6 230 Vac F551 F555 F552 rJ45 sockets 346020 F558 230 Vac U444U4 F453AV 10” Multimedia Touch Screen
for local control
POTS+ADSL external telephone line
TO THe MY HOMe SYSTeM STAr CenTre
To the telephone system rJ45 sockets system
346020 230 Vac
To other patching devices LAn
m
Y H
O
m
E
S
Tr
U
C
TU
rE
d
C
a
B
Lin
g
S
YS
TE
m
F
O
r T
H
E H
O
m
E S
EC
TO
r
data network and telephone distribution system with
triple socket connector (multimedia wiring)
F444U4 PWR DC IN LINE LINE RESET FACTORY LAN 1LAN 3 1 2 3 4 LAN 2LAN 4 ADSL INTERNET LINE PRI 1- 2 Power 230 Vac F551 346020 F558 230 Vac U444U4 F552 DIn rail rJ11 telephone
connector adapter
DIn rail adapter for multipurpose connectors
For the wiring of the sockets use the cable item L4668CM. The system shown cannot be integrated with those shown in the previous pages
POTS+ADSL external telephone line STAr CenTre Multipurpose connectors
ITEM DESCRIPTION DIN MOD. QUANTITY F444U4 F551 F400A F552 346020 L/N/NT4270 ADSL modem Switch 10/100 Mbs Connector adapter Power supply Power supply Multipurpose connectors 10 4 4 1 2 1 1 3 1 1 8
ITEM DESCRIPTION DIN MOD. QUANTITY L/N/NT4262/11 L4668D/30 L4668T/30 F215P/36D3 F558 L4668CM RJ11 connectors Patch cords Patch cords Distribution board ADSL filter UTP cable - cat. 5
36 4 5 4 1 1 412