• No results found

Harmonic Analysis and Its Mitigation Technique In Industrial Environment

N/A
N/A
Protected

Academic year: 2020

Share "Harmonic Analysis and Its Mitigation Technique In Industrial Environment"

Copied!
6
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 1: Electrical Data of Battery Industry
Fig. 1- Representation of detuned filters in star connection & Single line diagram
Table 2:  For 7%, 440 Volts Detuned Filters
Table 4: Measured Current  Harmonics by Power Analyzer

References

Related documents

The study revealed that using cold spray zinc coating on Aluminum-alloy substrate can be achieved at room temperature.. Since all the particles are of range

- 0 3 while for the series illustrated on the right side of the panels, the "conservative" series, an isolate that seemed minimally altered was selected.. Thus

This is a study of the succession experiences of second generation family business owners and how those experiences may influence their approach to planning the next

Large block of Pliocene limestone tilted on edge near the rim of the 12-m terrace at Arroyo 205. Blanco, showing a basal layer with andesite cobbles that can be matched to an

Cílem článku je posoudit možnosti využití geografických IT a fuzzy množin pro podporu rozhodnutí o pojištění nemovitého majetku proti riziku poškození živelnými silami. Teo

The position of the primary and secondary slider blocks after the mass movement is de- termined by the average residual friction angles at the sliding surfaces under drained

To investigate the possibility that strain differences contribute to susceptibility to repeat infections, we developed assays to detect antibodies to the two variable regions of the

The structure of the designed triple-band antenna is the same as the dual-band antenna shown in Figure 1(d), just adding a third microstrip patch on the top of the dual-band