• No results found

Evaluation of the Thermal Performance of Thermosyphon Heat Pipe Solar Collector with Copper oxide as Nanofluid

N/A
N/A
Protected

Academic year: 2020

Share "Evaluation of the Thermal Performance of Thermosyphon Heat Pipe Solar Collector with Copper oxide as Nanofluid"

Copied!
6
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1 Experimental setup
Fig 5 variation of efficiency with time for 0.3wt% Cuo  nanofluid at 4 and 8kg/hr. coolant rate
Fig.11 Effect of inclination angle and concentration of CuO  on average efficiency
Fig 12 Variation of instantaneous efficiency for CuO nanofluid with 4kg/hr coolant rate

References

Related documents

Another example of where CAI was utilized in various major subject areas was in the study by Clinkscales (2002) that examined the effectiveness of CAI on mathematics. Test scores

Effects of unenhanced, enhanced, and elaborated input on learning English phrasal verbs Results of the present research are in line with findings of Kim (2003), who found that

Number of words per year divided by occurrences of hast. Figure 4 shows that linguistic change, especially on the part of an individual speaker, is rarely uniform, and the actual

Taking into consideration that for the success of inclusive education, it is important to understand teachers’ attitudes, the purpose of this study is to

• Under the regulations, ERISA Automatic 403(b) Plan sponsors must provide employees with the initial notice upon date of hire or at least 30 days in advance of

Moreover, the seller of gas fuels carrying out the sale of such fuels to final recipients connected to the distribution or transmission grid, or the seller of energy carrying out

A self-diagnosis fault warning lamp is now integrated in the dash panel insert in all petrol- engined

Figures 5 and 6(a,b) shows the overall heat transfer coefficient and Nusselt number of CuO nanofluid and water in terms of the Reynolds number at different volume