• No results found

Sheet Bending Deformation in Production of Thin Walled Pipes

N/A
N/A
Protected

Academic year: 2020

Share "Sheet Bending Deformation in Production of Thin Walled Pipes"

Copied!
9
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1. Bending deformation diagrams: (а) Bending by pres- sure of roller; (b) Serial step-by-step bending of a pipe; (c) Bending moment
Figure 2. Function graph
Figure 3. Diagram of flat sections in pipe forming.
Table 2. Values of Force in forming sheet end areas (b = 0.6 m; σТ = 260 МN/m2; l = 0.4 m; h = 4 × 10‒2 m)

References

Related documents

Results suggest that the probability of under-educated employment is higher among low skilled recent migrants and that the over-education risk is higher among high skilled

It was decided that with the presence of such significant red flag signs that she should undergo advanced imaging, in this case an MRI, that revealed an underlying malignancy, which

In the present study, hyphenated technique involving dyad system of reverse-phase high performance liquid chromatography and electrospray- ionization tandem mass

Field experiments were conducted at Ebonyi State University Research Farm during 2009 and 2010 farming seasons to evaluate the effect of intercropping maize with

Мөн БЗДүүргийн нохойн уушгины жижиг гуурсанцрын хучуур эсийн болон гөлгөр булчингийн ширхгийн гиперплази (4-р зураг), Чингэлтэй дүүргийн нохойн уушгинд том

19% serve a county. Fourteen per cent of the centers provide service for adjoining states in addition to the states in which they are located; usually these adjoining states have

The paper is discussed for various techniques for sensor localization and various interpolation methods for variety of prediction methods used by various applications

Eksperimenti su pokazali da je za mutiranu tRNA Trp , koja nosi supstituciju u D-ruci, smanjena točnost procesa translacije na način da su reakcije koje se odvijaju