• No results found

Effect of T6 Heat Treatment on Dry Sliding Wear Performance of Al 7075/Al2O3/ TiC Hybrid Metal Matrix Composites

N/A
N/A
Protected

Academic year: 2020

Share "Effect of T6 Heat Treatment on Dry Sliding Wear Performance of Al 7075/Al2O3/ TiC Hybrid Metal Matrix Composites"

Copied!
7
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1: Wear Specimens
Figure 2: Pin-on-Disc Machine
Figure 4: Microstructural images of worn surface – Al- 7075 with 8% TiC and 0 % Al2O3 composition (100X)
Figure 5: S/N Ratio for wear rate of Al-7075/ Al2O3/TiC
+2

References

Related documents

This unique quality of HRV/HRC analyses has led to interest in its application in pre-hospital triage and emergency clinical decision making; interest which has been bol- stered by

It was decided that with the presence of such significant red flag signs that she should undergo advanced imaging, in this case an MRI, that revealed an underlying malignancy, which

19% serve a county. Fourteen per cent of the centers provide service for adjoining states in addition to the states in which they are located; usually these adjoining states have

in a Case Previously Reported as "Nutritional Anemia in an Infant Responding to PERNICIOUS ANEMIA IN AN EIGHT YEAR OLD GIRL: Additional

Field experiments were conducted at Ebonyi State University Research Farm during 2009 and 2010 farming seasons to evaluate the effect of intercropping maize with

Based on the results of the study, for thicker slabs, the shear stiffness is higher and therefore the presence of shear lag is attenuated. It is clear that when the slab thickness is

The study focuses on public lighting (PL) and is based on data collected through the Lumière project (www.progettolumiere.enea.it) (ENEA). We identified