• No results found

Prediction of Wavy Liquid Film Profile for Thin Film on a Falling Film Absorber

N/A
N/A
Protected

Academic year: 2020

Share "Prediction of Wavy Liquid Film Profile for Thin Film on a Falling Film Absorber"

Copied!
7
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1. Coordinate system for the falling wavy film.
Figure 2are mathematically correct they are not physically so.
Figure 2. The wave profile for water at Re = 100, and different values of Fr.
Figure 4. The wave profile for water (γ = 3400 at Reynolds number, Re = 100, z = 2.8, a = 0.021645 and different values of Fr)

References

Related documents

The electrical resistance of a conductor prepared on a re- laxed PDMS membrane was monitored for an extended pe- riod in its as-prepared, relaxed state. The resistance of the wavy

Ishaan gives a glance towards Vidya over his shoulders but doesn't respond and looks away.. Vidya now climbs up on the ledge too,

These careers offer ISTJs the chance to use their technical skills and work with products that demand exacting accuracy. Because they take nothing for granted, they catch slips

Hipotesis 1 dan 2 dilakukan pada perusahaan besar (big cap), untuk mengetahui apakah hasil- hasil tersebut berlaku juga untuk perusahaan-perusahaan diluar kelompok big cap

The Bachelors in Film Studies also helps prepare students to continue on another graduate living at Chapman University with a Masters in Film Studies, Film Production or liquid film

As an alternative, the American Conference of Governmental Industrial Hygienists (ACGIH) has developed a method of assessing heat stress risk based on a wet bulb globe

Larvae with nociceptor-specific knockdown of Tor showed significantly increased sensitivity (increased latency) to a noxious thermal stimulus (46°C) when compared to the GAL4

MPA graduates, however, were being accepted both in public and private sector organizations mainly for two reasons; first, the MPA program provided broad based management